Lublin - Dorohusk

Herlev said:
Hi zieba111.
Thanks for this updated route it great.
I am missing those 2 kuid number can you help.
Unknown Location: <kuid:263713:150002>
Unknown Location: <kuid:263713:8153>
zieba I am missing all the pylons where there is a tension weight
I can not put screenshots here but can sent them to you if I had your e-mail
herlev
Click to expand...

Link for pylons: https://www.dropbox.com/s/txr6kx8zppo67jr/pylon.cdp?dl=0

I don't know what are these two kuids:
Unknown Location: <kuid:263713:150002>
Unknown Location: <kuid:263713:8153>

I don't have them on my route and I don't have them on my Trainz too.
 
Hi Zieba111
Those 2 kuid numbers are for the 2 signals
kuid:263713:20050:5 = Wskaznik W3 lewy na wysiegniku v5
kuid:263713:20051:5 = Wskaznik W3 na slupie v

Unknown Location: <kuid:263713:150002>
Unknown Location: <kuid:263713:8153>
herlev
 
Hi Zieba111,
I note you mentioned that the 'Lublin-Dorohusk' route was actually for TS2010. However, I downloaded it into TS12 and it works very well. I first made a 'clone' of the route. In editing, I did notice a few missing fences, but I didn't worry about that and replaced them with something else that was quite suitable.

I even discovered the Airport that was buried under some hills, so I have now brought it to the surface and 'activated' it to make it usable. I also added a football stadium near Rejowiec so that football fans can travel from the airport to the football stadium. I have only done this for my own use and I will not upload it to the DLS. I've attached a couple of screenshots ....

Roy3b3_20151002_0001.jpg


This is the airport with a passenger train heading out.

Roy3b3_20151002_0003.jpg


Here's one of the stadium and a branch line Station for the football fans.

This is a great route and very well detailed. Thank you so much for all your work.

Cheers,

Roy3b3
 
Hi Zieba111
Can you help me with those missing kuids.
Unknown Location: <kuid:389354:10>
Unknown Location: <kuid:389354:11>
Unknown Location: <kuid2:132952:100632:1>
Unknown Location: <kuid2:150399:24542:5>
Unknown Location: <kuid2:150399:24550:5>
Unknown Location: <kuid2:173943:200059:1>
Unknown Location: <kuid2:173943:200152:1>
Unknown Location: <kuid2:173943:200177:2>
Unknown Location: <kuid2:173943:200224:2>
Unknown Location: <kuid2:173943:200227:1>
Unknown Location: <kuid2:263713:442:2>
thanks in advance
herlev
 
Hi Zieba111.
There is a problem with some missing pylons
the pylons are missing where there are tensions weights for the overhead wires.
Look at the start of the overhead wires at Dorohusk you will see the missing pylons
herlev
 
Hi Zieba111,

And, here is another problems:
at Dorohusk have some "sinkholes"
(It looks better in wireframe view)

1:
image.jpg



2:

image.jpg


3:

image.jpg



image.jpg



And a floating track end at the beginning Lublin yard:
(this is in the 1.2 too)

unnamed_20151004_0000_2.jpg



unnamed_20151004_0001_2.jpg




Ah, and an important thing:
Please update the map kuid! (like the other versions)
(to kuid2:157809:100035:3 or something)
(Or maybe another kuid number, for high poly track version.)

Because this overwrite the existing map, not update it.
This will lead to confusion.
 
This is bug of Trainz engine. No matter how many I will correct terrian, after saving there are another problems...
Older version of map made a lot of trainz crash while playing my sessions. That map was too big.
 
zieba111 said:
This is bug of Trainz engine. No matter how many I will correct terrian, after saving there are another problems...
Older version of map made a lot of trainz crash while playing my sessions. That map was too big.
Click to expand...

Yes Ts10 editor has lot of bugs...
This is one..
The undo/redo system is enabled in the editor?
Sadly its need to be disabled, because that corrupts the map. (yes, without its uncomfortable)

(and the second hated:
- not always saving all kuids in the map file,
example in the v 1.2 map:
kuid:149987:21513
kuid:46819:21108
kuid:46819:21110
kuid2:148893:21022:1
kuid2:283523:21090:1
)

I dont had any crash. (ok, i get a good comp, with lot of mem)
The size is not always the problem, i own much bigger maps.

This os my settings; (maybe someone make use of this)




the drawing distance is 3500-4000m
And my trainzoptions:
-DynamicVertexBufferSize=16777216
-DynamicIndexBufferSize=2097152
-framerate=100
-ResourceMemory=2048 or up to 9632
-keepallresources
 
Sorry to but in on this , I don't think this is only a Tane issue. I have had this since 2012 update, (not sure the build ) and I was told it was connected DEM programs? I had this plus random spikes. Even thought I didn't use other program to make most of my routes. Would show up after saved work, at random times. And I never could correlate a reason to why or when.


Matt
 
Railwoodman said:
Sorry to but in on this , I don't think this is only a Tane issue. I have had this since 2012 update, (not sure the build ) and I was told it was connected DEM programs? I had this plus random spikes. Even thought I didn't use other program to make most of my routes. Would show up after saved work, at random times. And I never could correlate a reason to why or when.


Matt
Click to expand...

Hy Matt.

We discuss Ts10, not Tane.
Yes, spikes comes first from Dem, if the edges, or another areas have missing, or incorrect (for the convert program) data.
But this can be corrected in Trainz. I newer experienced these spikes afterwards savings.
If ths happening in Tane too.. thats not good...




It would be nice to know what doing this.


(Maybe running out memory, or some addins?)

I have a bunch of editing and saving for the 1.2 route, and newer see these. (Including TS12)
I will check 1.3 too.

Note:
I experienced spikes when an older Trainz map (ts2004 and etc) has been edited in newer version of Trainz.
But the spikes going upwards, not down.
 
Sorry again, need to read more carefully next time .:hehe: But since I never had 2010 at all, and had this issue in 2006 up to 2012. Always after trying to incorporate DEM programs. My bet is some incapability with the programs. But haven't seen it in TANE yet, ( reason for my concern ) This problem ruined many real DEM routes I had, and somehow started showing up in other work . Now lost.


This Layman has yet to hear or read an explanation why or fix .



Matt

BTW the route looks great:D
 
Hi Shogo84
Sorry I can not upload screenshots to the forum.
Can only get them to the persons if I have there e-mail
Sorry
herlev
 
Having installed all of the sessions etc for the route I find that I am missing
kuid2:313733:900025:1
Having checked trainzkuid etc I am unable to find this 1 kuid
Any help appreciated
Thank you
 
You must log in or register to reply here.

Similar threads

R
EURSIG - Set Up, Switch On, Depart - a new backend for European signals - German and general broken scripts European signal replacement project
Replies
3
Views
500
ricomon35
R
R
My Trainz TRS22 Ground ZERO moment
Replies
10
Views
1K
JCitron
J
J
Slow add water tool in TANE!
Replies
8
Views
517
nicky9499
N
J
A railfan treat and special ride on the Boston EL. Part 1
Replies
6
Views
818
JCitron
J
J
Maintaining Railroad History Through New Technology
Replies
2
Views
492
JCitron
J
Back
Top