Looking for solution to connect Mod1t pole ( by Emges ) to Mod 2t poles ( by Emges )

[belgian46]

Hello,

In my tram/train route, I'm using the Mod 1t pole and Mod 2t poles created by Emges.

Within this route I often have to pass from Mod 1t pole to Mod 2t pole. Emges has also created a catenary wire, which can be smoothly connected to his Mod 1t Pole.

I'm looking for a solution to smoothly connect the Mod 1t pole to the Mod 2t poles ( or vice versa ).

Here is a picture of the situation ( red circle = Mod 2t poles, green = Mod 1t pole

Any suggestions?

Kind regards

Kurt :wave:

 

[JCitron]

Hi Kurt,

What you need is catenary wire without the poles.

This "wire" will sit between two catenary poles and connect the two different kinds of service.​

There are various makers who have made this in various styles hopefully there is one that matches.

 

[belgian46]

Hi Kurt,

What you need is catenary wire without the poles.

This "wire" will sit between two catenary poles and connect the two different kinds of service.​

There are various makers who have made this in various styles hopefully there is one that matches.

Hello John,

I have been looking for a wire which connects both Emges poles. Emges catenary wire fits perfectly with his mod 1 t pole. Perhaps there is one ( not made by Emges ) with a different name ( different from a logic name, such as wire, caternary wire, etc ... )?

Kind regards

Kurt :wave:

 

[JCitron]

I did some poking around.

<kuid:499064:100208> nmbs catenary wire 1Tr 50m by jeeny . It's available on the DLS

Here's more by nexusdj:

<kuid:45317:102161> UK 25Kv S2 50m Cat wire
<kuid:45317:102279> UK 25Kv S2 50m Mid section wire
<kuid:45317:102238> UK 25Kv S2 50m Termination wire
<kuid:45317:102252> UK 25Kv S2 50m Termination wire V2

And

<kuid:481384:100944> RDG Catenary - Single Wire Only by rrsignal.

There are many, many, more.

Hope these help.

 

[belgian46]

I did some poking around.

<kuid:499064:100208> nmbs catenary wire 1Tr 50m by jeeny . It's available on the DLS

Here's more by nexusdj:

<kuid:45317:102161> UK 25Kv S2 50m Cat wire
<kuid:45317:102279> UK 25Kv S2 50m Mid section wire
<kuid:45317:102238> UK 25Kv S2 50m Termination wire
<kuid:45317:102252> UK 25Kv S2 50m Termination wire V2

And

<kuid:481384:100944> RDG Catenary - Single Wire Only by rrsignal.

There are many, many, more.

Hope these help.

Hello John,

Thank you for your assistance and help.

I had already tried several of your suggestions and unfortunately the wire was either to low or to high.

Your final suggestion RDG Catenary - 1 wire only by rrsignal.

Well, the wire doesn't automatically connect with the Mod 1t pole/2t poles ( by Emges ), but it is the one which is +/- on the same level ( height ) of the wire being used in mod 1t pole/2t poles. So I have decided to use this one and I don't mind that the color of the wire is green.

Kind regards

Kurt :wave:

 

[JCitron]

Nice to hear you found something that works.

You can actually clone and modify the asset by changing the wire color to black or whatever color you want to use. You might have to do this in the associated library rather than the actual asset.

 

[belgian46]

Nice to hear you found something that works.

You can actually clone and modify the asset by changing the wire color to black or whatever color you want to use. You might have to do this in the associated library rather than the actual asset.

Hello John,

Good idea - change green into black - and this will still give me the oppertunity to see where I have placed the RCatenary - 1 wire only.

Kind regards

Kurt :wave: