I had a look at my Windows Update History and that particular one KB5063878 is not listed. I did very recently do a mass data transfer to two SSD USB drives without any problems. So I have either dodged a bullet or my system does not have the hardware that requires the update.
Important warning about the latest Windows Update - do not install!
- Thread starter JCitron
- Start date
My HP laptop, that I'm using while away down south in soggy Sydney, has this update. I was installing all the patches I could find after my 24H2 shambolic install on both my PC tower and the laptop.
So far it hasn't caused any issues but I haven't been moving large files around either. The hynix drive isn't on any suspect list I've seen.
I was toying with the idea of downloading the latest TRS22+ to while away another wet day but maybe I'll read a book instead.
So far it hasn't caused any issues but I haven't been moving large files around either. The hynix drive isn't on any suspect list I've seen.
I was toying with the idea of downloading the latest TRS22+ to while away another wet day but maybe I'll read a book instead.
That update has been on my Dell for 3+ days. No problems with my SSD, but haven't done any 50GB+ transfers.
Removed now. Paused updates.
After reading about the potential problem, I was preparing to do a huge transfer of files ... perhaps creating the situation that triggers the problem!
Thank you John for sharing the warning.
Removed now. Paused updates.
After reading about the potential problem, I was preparing to do a huge transfer of files ... perhaps creating the situation that triggers the problem!
Thank you John for sharing the warning.
Dinorius_Redundicus
kuid 68213
How to Block Windows 11 24H2 update on Personal PCs.
If you want to block the installation of Windows 11 version 24H2, then this guide is for you. Windows 11 version 24H2 was released on October 1, 2024 and wilwww.wintips.org
Luckily, I didn’t need to do any of that registry stuff.
Some time after uninstalling the problem update, the system notified me that I needed to look at something in my update settings (presumably it detected that I didn’t have the latest update installed). Only then did the Update control panel include a Pause Updates button. It had options for 1, 2, 3, 4, or 5 weeks. I opted for 4 weeks, hoping that it will be sufficient time for Microsoft to come out with a better update.
It’s annoying and confusing that this Pause button is not displayed all the time, but at least it does appear eventually.
Last edited:
WestSideRailways
Well-known member
Am I correct that you lot are talking about a windows11 release, that was released about 12 months ago.???
A bit like shutting the barn door after the horse has bolted!
A bit like shutting the barn door after the horse has bolted!
Dinorius_Redundicus
kuid 68213
No. It's an update for Windows 11 issued in August 2025. Watch the video.
Dinorius_Redundicus
kuid 68213
Latest news on this issue. Phison not able to reproduce the claimed SSD failures;
Seems to make sense what was discovered. Overheating SSDs that were not setup with proper ventilation in a case, or no cooling heatsink. A big file transfer will tend to make the SSD warm up. That is more relief to me as I never seem to exceed 45 Deg. C on my setup.
Thank you for posting an update on this. I never experienced an issue with my system while running that update. If it is heat related, that won't affect me because like you I keep my systems as cool as possible.
I can see heat being an issue with those new NVME external enclosures and with servers that are not kept in optimal environments, or many computers that are not adequately cooled due to many reasons included clogged fans and ventilation openings, or poor design. This issue is most likely also seen with systems being forced to run graphics intensive games or programs that really heat up the inside of their poorly ventilated cases.
From my IT experience, servers have been tucked in closets with zero ventilation and are run 24/7 365 in that environment. This was one of the issues that we solved when the company was moved by setting up a dedicated real computer room to house all of our servers, TELCO, and network equipment with a dedicated HVAC and power separate from the rest of the office where A/C was turned off when no one was in the building.
From my experience as a tech, devices such as SSDs, at the time I dealt with their great grandparents EEROMs and EPROMs, tended to be more heat sensitive than other components. In the olden days, we could reproduce failures by heating up the components with a heat gun, like those used to peel paint, then follow up with a cool down with freeze spray, or Freon. This was before the Freon limitations in the early to mid-1980s.
Sorry for the off-topic, but When I was IS Coordinator for the Idaho Region Timberlands, the servers were in my office (fortunately a large room), with an old window air conditioner. They agreed that was not adequate, so installed a dedicated outside unit with vents in the wall, and a remote control. The only problem was, the town we were in did not have clean power, and any time the power blipped, the new AC unit went off and did not come back on except by turning it back on. So of course every time I left my office I had to turn on the old window air conditioner just in case....
That's not unusual and is very much like the second location where the company moved to. It was there the computer room was a former bathroom. A large window air conditioner was placed in the window and that was used to cool down the servers. Like you, I had a remote control and had to watch the city power because it had major brownouts and the A/C unit would turn off.Sorry for the off-topic, but When I was IS Coordinator for the Idaho Region Timberlands, the servers were in my office (fortunately a large room), with an old window air conditioner. They agreed that was not adequate, so installed a dedicated outside unit with vents in the wall, and a remote control. The only problem was, the town we were in did not have clean power, and any time the power blipped, the new AC unit went off and did not come back on except by turning it back on. So of course every time I left my office I had to turn on the old window air conditioner just in case....
The company by this point was closing, they lasted another 18 months and we dealt with that until the end. It was sad going from a dedicated room to a former bathroom but I made do the best I could.
I took a job offer at the company headquarters in Boise starting January 2nd, and on the 12th of January they announced the Idaho Region Timberlands was closing. People thought I had inside information, but it was a career move, and I could see the handwriting on the wall as well. Turned out to be perfect timing!
Similar threads
