Hayes-Logger running bogies

[rweber95]

Trying to fix the hayes-logger,<kuid2:50567:15818:1>. Just about done except when I place it on a track in Surveyor, the wheels (bogies) are running while standing still. I've seen this with locos and I think I've even fix one or two but I can't remember what the fix was. Anyone have a fix for constantly running bogies?

Bob Weber

 

[RoysTrainz]

finally someone else likes Hayes logger

hi Rweber I not checked yet on the running wheels and had yesterday the same problem.
But i cannot get the truck to work as it cannot load the mesh and lost of other stuff textures faulty/corrupt in TS12.
If you can make the entire hayes logger truck and jinker to work in TS2010 please pm me and let me try yours on TS12.
If been waiting so long for this so beautiful item to make it run.

good luck and thanks
'
Roy

 

[narrowgauge]

Open the config file for the bogies and if there is a line similar to 'animation-loop-speed' ( I am going by memory for the name), this line is the culprit. Delete it.

Make sure that the config has a line 'animdist x.x' where x.x is the distance in metres that the wheel travels in 30 sec

Peter

 

[RoysTrainz]

thanks Peter DID ANYONE get the entire hayes logger working???

Peter i will check into this later and edit the cfg.
Wonder who was able to run the complete hayes logger/jinker included in TRS2010 and TS12????

Appreciated,

Roy

 

[rweber95]

Constantly Running Bogies

Open the config file for the bogies and if there is a line similar to 'animation-loop-speed' ( I am going by memory for the name), this line is the culprit. Delete it.

Make sure that the config has a line 'animdist x.x' where x.x is the distance in metres that the wheel travels in 30 sec

Peter

I deleted the 'animation-loop-speed' entry in the config.txt file which stopped the constant running bogies but on re-test, the wheels don't turn at all.
I checked the wiki for kind:bogey help but nada! Finally checked the kind:bogey entry in CCG2006.pdf and found this entry:
"In previous versions of Trainz, the following lines were used in the config.txt file - anim anim.kin animation-loop-speed 1.0. These are no longer required."
Removed the anim.kin and animation-loop-speed lines from the config.txt file and all works ok now.

Bob Weber

 

[RoysTrainz]

very well Weber

Bob could you upload the entire hayes logger and jinker working to the dls? OOOPS I did not see the 2 pm's you send thanks!!!!!!

Much appreciated

Roy

 

[RoysTrainz]

here is the result awesome truck!!!!

the truck is still floating and the click sound not deleted yet.

many many thanks

Roy

 

[rweber95]

The truck floats because the mesh is too far above origin. That can only be changed by the author. The track clickit-t-clack is because I forgot to put the tag

disable-extra-track-sounds                        1

in the jinker's config.txt file. I did put it in the hayes-logger. Use the Content Manager and open the jinker kuid for Edit -Edit in Explore and add the tag. You can use the config.txt file of the hayes-logger as a guide on placing it. When done, save and commit.

Bob Weber

 

[RoysTrainz]

did already thanks

yes I did change the click off thanks for the treference and help on this truck.

The floating I understand .

have a nice day

Roy