williamj78
Will, The owner of VPTG
Can someone help me with my gen rc4?
Its displaying Warning: This asset uses an obsolete trainz-build number. Trainz-build numbers below 2.7 are no longer supported.Warning: Required tag 'username' was missing and has been set to default.
Warning: Required container 'mesh-table' is missing.
Warning: Required container 'thumbnails' is missing.
I tried changing the bulid no but the warning was still there the config is
Its displaying Warning: This asset uses an obsolete trainz-build number. Trainz-build numbers below 2.7 are no longer supported.Warning: Required tag 'username' was missing and has been set to default.
Warning: Required container 'mesh-table' is missing.
Warning: Required container 'thumbnails' is missing.
I tried changing the bulid no but the warning was still there the config is
Code:
kind "interior"
kuid <kuid:-10:173>
cameralist
{
camera0 0.857,-0.344,0.447,1.516,-0.115
camera1 0.448,-0.132,0.485,-0.011,-0.549
camera2 0.492,-0.232,0.149,-0,-0.082
camera3 -0.585,-0.616,0.323,-0.1,-0.043
camera4 -0.857,-0.344,0.447,-1.516,-0.115
}
cameradefault 2
}
{
speedo_needle
{
kind "needle"
mesh "speed_needle.pm"
att "a.speed_needle"
limits 0,56
}
bptrainbrakepipe_needle
{
kind "needle"
mesh "brakepipe_pressure_needle.pm"
att "a.brakepipe_pressure_needle"
limits 0,1000
}
bptrainbrakecylinder_needle
{
kind "needle"
mesh "brakecylinder_pressure_needle.pm"
att "a.brakecylinder_pressure_needle"
limits 0,1000
rem "need a second one of these"
}
bplocomain_needle
{
kind "needle"
mesh "brakecylinder_pressure_needle.pm"
att "a.main_reservoir_needle"
limits 0,1000
}
ampmeter_needle
{
kind "needle"
mesh "brakecylinder_pressure_needle.pm"
att "a.ammeter_needle"
limits 0,1500
angles 0,2.12058
}
horn
{
kind "lever"
mesh "horn.pm"
att "a.horn"
limits 0,1
angles 0,-0.45
notches 0,1
notchheight 2,2
radius 0.1
mousespeed -1
}
throttle_lever
{
kind "lever"
mesh "power_handle.pm"
att "a.power_handle"
limits 0,32
angles 0,-0.93
notches 0,0.0303,0.0606,0.0909,0.1212,0.1515,0.1818,0.2121,0.2424,0.2727,0.303,0.3333,0.3636,0.3939,0.4242,0.4545,0.4848,0.5151,0.5454,0.5757,0.606,0.6363,0.6666,0.6969,0.7272,0.7575,0.7878,0.8181,0.8484,0.8787,0.909,0.9393,1
notchheight 1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1
mousemode "exact"
}
trainbrake_lever
{
kind "lever"
mesh "brake_control_handle.pm"
att "a.brake_control_handle"
limits 0,4
angles 0,-0.93
notches 0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
notchheight 1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1
}
independantbrake_lever
{
kind "lever"
mesh "brake_control_handle.pm"
att "a.ind_brake_lever"
limits 0,32
angles 0,-0.93
notches 0,0.0303,0.0606,0.0909,0.1212,0.1515,0.1818,0.2121,0.2424,0.2727,0.303,0.3333,0.3636,0.3939,0.4242,0.4545,0.4848,0.5151,0.5454,0.5757,0.606,0.6363,0.6666,0.6969,0.7272,0.7575,0.7878,0.8181,0.8484,0.8787,0.909,0.9393,1
notchheight 1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1
}
parking_brake
{
kind "lever"
mesh "park_brake.pm"
att "a.park_brake"
limits 0,9
angles 0,-1.55
notches 0,1
notchheight 3,3
radius 0.15
mousespeed -1
}
reverser_lever
{
kind "lever"
mesh "master_switch.pm"
att "a.master_switch"
limits 0,2
angles 0,-1.6
notches 0,0.5,1
notchheight 1,1,1
}
switch_1
{
kind "lever"
mesh "slide_switch.pm"
att "a.slideswitch0"
limits 0,1
angles 0,-0.2
notches 0,1
notchheight 0,0
mousespeed -2
radius 0.2
}
switch_2
{
kind "lever"
mesh "slide_switch.pm"
att "a.slideswitch1"
limits 0,1
angles 0,-0.2
notches 0,1
notchheight 0,0
mousespeed -2
radius 0.2
}
switch_3
{
kind "lever"
mesh "slide_switch.pm"
att "a.slideswitch2"
limits 0,1
angles 0,-0.2
notches 0,1
notchheight 0,0
mousespeed -2
radius 0.2
}
switch_4
{
kind "lever"
mesh "slide_switch.pm"
att "a.slideswitch3"
limits 0,1
angles 0,-0.2
notches 0,1
notchheight 0,0
mousespeed -2
radius 0.2
}
switch_5
{
kind "lever"
mesh "slide_switch.pm"
att "a.slideswitch4"
limits 0,1
angles 0,-0.2
notches 0,1
notchheight 0,0
mousespeed -2
radius 0.2
}
switch_6
{
kind "lever"
mesh "slide_switch.pm"
att "a.slideswitch5"
limits 0,1
angles 0,-0.2
notches 0,1
notchheight 0,0
mousespeed -2
radius 0.2
}
pantograph_lever
{
kind "lever"
mesh "light_switch.pm"
att "a.slideswitch6"
limits 0,1
angles 0,-0.2
notches 0,1
notchheight 0,0
mousespeed -2
radius 0.2
}
light_switch
{
kind "lever"
mesh "light_switch.pm"
att "a.slideswitch7"
limits 0,1
angles 0,-0.2
notches 0,1
notchheight 0,0
mousespeed -2
radius 0.2
}
wheelslip_light
{
kind "light"
mesh "wheelslip.pm"
att "none"
}
}
asset-filename "Gen_RC4"
username-cz "Gen_RC4"
username-hu "Gen_RC4"
username-pl "Gen_RC4"
username-ru "Gen_RC4"
username-it "Gen_RC4"
username-nl "Gen_RC4"
username-es "Gen_RC4"
username-fr "Gen_RC4"
trainz-bulid 2.9
kuid-table
{
}
mesh-table
{
default
{
mesh "xxxxxxxxx.im"
auto-create 1
}
}