Blowing Horn Makes Bell Ring

[boyerm25]

Hi - I have a problem with the Nathan K3LAR2 that comes on the BNSF Dash9. When I blow the horn it makes the bell ring - anyone know why? It's really annoying.

 

[train20]

That is how the real one works till the train driver turns off the bell.

 

[boyerm25]

Really! I didn't know that. Thanks to JR for this little bit of prototypical accuracy that I for one, appreciate now that I know it is correct.

 

[epa]

Is this a TS12 only feature? I can't get it to work in TS1O.

 

[norfolksouthern37]

it is. there is no direct way to do this in TS10.

 

[AMTRAKwannabe]

Sorry to bump this, but how do I make the bell ring upon blowing the horn? Is it in the config? Also, if possible, can I get a list of the numbers for the ditchlight tag and what each number makes the ditchlight do?

 

[norfolksouthern37]

The bell coming on with the horn is all tied into the cab the locomotive is using. it is not part of the config but is a part of the cab interior.

The ditchlight settings are:

1 = on and blink with horn
2 = constant on no blink
3 = off and blink with bell
4 = off - toggle on with bell
5 = on and blink (bell or ditchlight key)

 

[AMTRAKwannabe]

Thanks! (ten)

 

[brendansbiz]

The bell coming on with the horn is all tied into the cab the locomotive is using. it is not part of the config but is a part of the cab interior.

The ditchlight settings are:

1 = on and blink with horn
2 = constant on no blink
3 = off and blink with bell
4 = off - toggle on with bell
5 = on and blink (bell or ditchlight key)

How would you find the location to put the tags in?

 

[SantaFebuff]

Notepad works.

- Josh

 

[Trainsim10]

I just found out (tested) that most Amtrak locos have flashing ditchlights activated by the semicolin key ( ; )

You can test it on any locomotive by pressing that key.

=)

 

[brendansbiz]

What I meant is where can I change the tags in the cab interior and what is the cab interior?