Bati Quarry and Ore Dock Loader Large - Trainz 2012

[sologuitarist61]

I am making an Industries route and decided to use both of the above, but for the life of me I cannot get either of them to work - well I cannot get the Quarry to load the empty Ore Hoppers anyway, and the Ore Dock loader then doesn't work as the hoppers are empty. I have the Ore Dock Loader with an empty ore barge alongside.

Does anyone else use these items and have them actually working please - if so, how did you manage it?

KUID's as follows

Bati Quarry 50722:25094
Ore Dock Loader 2:60238:26226:1
Ore hopper 2:60238:15043:2

I have tried them in Driver where the consist slows to 10 mph but nothing happens, and have also Driven the consist manually with speeds ranging from 2 - 8 mph still with no luck.

Am I overlooking something fundamental here?

A merry Christmas to all who read this and a Happy New TANE!!!
Regards
Richard

 

[bendorsey]

Forgive me for mentioning the obvious but:

Is everything set up for the same product?

Try stopping a traincar under the chute. Things like this probably were designed for a moving load/unload but what if the gent that made them set them up for a stopped load/unload.

Ben

 

[sologuitarist61]

Forgive me for mentioning the obvious but:

Is everything set up for the same product?

Try stopping a traincar under the chute. Things like this probably were designed for a moving load/unload but what if the gent that made them set them up for a stopped load/unload.

Ben

Never thought of that!! Will give it a go, many thnaks

Richard

 

[mikeaust]

The Bati quarry needs specific products which are not in the Dock loader.
cheers,
Mike

 

[sologuitarist61]

The Bati quarry needs specific products which are not in the Dock loader.
cheers,
Mike

Thanks Mike, have given up on the Bati Quarry now as I cannot find anything that it will load content into.

Got the loader to work OK using coal from the coal mine Industry, so have got that going OK and loading the coal into a sea barge but cannot find any way of unloading it from the barge afterwards. Oh well, back to searching the Content Manager!

Merry Christmas
Richard

 

[Chris004]

A quick look at the Bati Quarry config shows it works with 5 nonexistent products:
<kuid:64577:31035>
<kuid:64577:31038>
<kuid:64577:31053>
<kuid:64577:910017>.

Replace this (in the config.txt) with Mineral, <kuid2:86311:66:4> and the Ore Loader will work with it.

 

[Chris004]

Forgot how bad cmp search is

Here are the 5 non-existent products:
FET calcaire/gypse,<kuid2:64577:31035:1>
FET clay,<kuid2:64577:31038:1>
FET stones,<kuid2:64577:31039:1>
FET ballast,<kuid2:64577:31053:1>

Since not one of them is Zatoworks' Mineral the gist of my previous post stands.

What would it take for CM to find xxx:1?

 

[Mick3269]

Look for Quarry Kuid:453099:100004.
This is Similar to Bati Quarry and Missing kuids you show are in here.

 

[stationmistress]

Here's a strange thing. I've been looking for a quarry and had not heard of Bati Quarry. I looked for it on the 3.7 CM. Yup, showed up and it downloaded perfectly. I then looked for it on the DLS black pages and the new DLS white pages to download in a lower build. No Downloads Found. What gives? It's only a 2.0 asset. JCitron wrote 'Bati Quarry originally created by Rayomnd Parrot and now a built-in item'. Wrong. Downloaded and installed 10.9 Mb.

After transfer to TRS2009, these missing items downloaded with no problem leaving a complete asset.

FET ballast,<kuid2:64577:31053:2>
FET stones,<kuid2:64577:31039:2>
FET clay,<kuid2:64577:31038:2>
FET calcaire/gypse,<kuid2:64577:31035:2>

 

[JCitron]

Here's a strange thing. I've been looking for a quarry and had not heard of Bati Quarry. I looked for it on the 3.7 CM. Yup, showed up and it downloaded perfectly. I then looked for it on the DLS black pages and the new DLS white pages to download in a lower build. No Downloads Found. What gives? It's only a 2.0 asset. JCitron wrote 'Bati Quarry originally created by Rayomnd Parrot and now a built-in item'. Wrong. Downloaded and installed 10.9 Mb.

After transfer to TRS2009, these missing items downloaded with no problem leaving a complete asset.

FET ballast,<kuid2:64577:31053:2>
FET stones,<kuid2:64577:31039:2>
FET clay,<kuid2:64577:31038:2>
FET calcaire/gypse,<kuid2:64577:31035:2>

Hi Stationmistress.

The Bati Quarry shows as built-in on my installation. KUID 50722:25094, and is version 2.0. I see no other updates, but it works fine.

I did upload a texture from that asset to the DLS to act as a filler around the mesh because it was odd how the quarry was "stuck" into the ground with no other ground diggings around it. Here is the quote from my texture:

"A texture copied from the Bati Quarry originally created by Raymond Parrot and now a built-in item. The texture was created because I wanted to blend in the quarry with the rest of the terrain. The texture is uploaded as-is, and no warranties or guarantees are expressed or implied."

My texture is Build 2.9.

John

 

[stationmistress]

Hi Stationmistress.

The Bati Quarry shows as built-in on my installation. KUID 50722:25094, and is version 2.0. I see no other updates, but it works fine. John

I went to TRS2009 SP3/4 CM, nothing. I then checked the DLS on both TS12 v49922 and TS12 v61388. Both show the Bati Quarry as available for download not built-in. What are you using?

BTW. Quarry kuid:453099:100004 is build 2.9, built-in and identical to Bati Quarry.

 

[mikeaust]

As far as I can remember it has been built in since TS12.
Cheers,
Mike

 

[stationmistress]

Right. Here we go.

TS12 v61388 Content Manager v3.7

Status Name Kuid Author Installation time Size Build

DS Bati Quarry kuid:50722:25094 raymondparrot 18 April 2011 unknown 2.0

DS Bati Quarry Rock kuid:124863:1014 JCitron 13 December 2011 unknown 2.9

Built-in Quarry kuid:453099:100004 gawpo50 9 February 2014 N/A 2.9 (date of TS12 installation)

 

[JCitron]

I went to TRS2009 SP3/4 CM, nothing. I then checked the DLS on both TS12 v49922 and TS12 v61388. Both show the Bati Quarry as available for download not built-in. What are you using?

BTW. Quarry kuid:453099:100004 is build 2.9, built-in and identical to Bati Quarry.

I'm using TS12 61388. It has the yellow icon meaning built-in. I didn't even know Peter had updated, or created his own version of this model.

John

 

[stationmistress]

This is the only version built-in from TS12 v47452 CM 3.6:

Built-in Quarry kuid:453099:100004 gawpo50 2 October 2013 N/A 2.9 (date of TS12 installation)

What I'm trying to get at is that there are two identical versions of the same asset, the later one built-in to TS12. The original version SHOULD be available on the DLS but isn't. I don't know what NV3's game is not including the 2.0 version on the Black/White Pages. Time for a ticket I reckon to get it straightened out.

 

[sologuitarist61]

Many thanks!

 

[sologuitarist61]

Hi Stationmistress.

The Bati Quarry shows as built-in on my installation. KUID 50722:25094, and is version 2.0. I see no other updates, but it works fine.

I did upload a texture from that asset to the DLS to act as a filler around the mesh because it was odd how the quarry was "stuck" into the ground with no other ground diggings around it. Here is the quote from my texture:

"A texture copied from the Bati Quarry originally created by Raymond Parrot and now a built-in item. The texture was created because I wanted to blend in the quarry with the rest of the terrain. The texture is uploaded as-is, and no warranties or guarantees are expressed or implied."

My texture is Build 2.9.

John

Yes that is the one I am using, or trying to use, but cannot get any response from it at all.