BR 9F

T

tommylee3010

New member
I just finished downloading th BR 9F but have 15 missing KUIDS that don't have any resultas

<kuid:101839:52048>
<kuid:101839:52050>
<kuid:101839:52051>
<kuid:101839:52052>
<kuid:101839:52053>
<kuid:101839:52054>
<kuid:101839:52055>
<kuid:101839:52056>
<kuid:101839:52057>
<kuid:101839:52058>
<kuid:101839:52059>
<kuid:101839:52060>
<kuid:101839:52061>
<kuid:101839:52062>
<kuid:101939:52025>

Thank You
 
Go into the config. file & change <kuid:101939:52025> to <kuid:101839:52025>, this was a typo (check the other kuid No.s you'll see it)
 
the other kuids are in the cab, my guesse is they are parts of the cab?
But now there are 14 kuids, wich meens 1 down 14 to go!!:hehe:
 
did you see the manual for the locomotive maybe if you see it you'll find the missing KUID's. manual at lesto route works need adobe reader 9 to see it:wave:
 
If we're talking about lielestosbrat's 9Fs, be aware that they don't work properly in 2009/2010 anyway, it's impossible to get them above 19 mph, where they start wheelslipping 100% regardless of where you set reg+cutoff. Steam enginespec's changed with 2009, I believe, so that's likely the cause.
 
tommylee3010 said:
Is that in cab mode? But all I am missing are the cab kuids. Is there any auther 9Fs Avallible? Not PAYWARE?
Click to expand...

Most likely it's just the DLS being picky. I redownloaded all of his 9Fs on thursday, so I know they're all on there. The DLS/CMP can be annoying at times, just keep trying to download, and it'll probably find them and grab them after a few times.

If you've installed the 9F itself manually, you can still right click on it and select 'download' and it'll grab all the dependencies.

Edit, and yes, I meant cab mode when I talked about the wheelslip problem, I don't use DCC mode so I can't comment on whether it works there, it probably does as I think the enginespecs are pretty much ignored in DCC mode.
 
You need to download the 9F's that are on the DLS you've downloaded the ones from either the TC3 website or the S&C site and if you don't own either TC3 or the S&C add-on then you will have missing add-ons.

All the dependencies for the 2004 9F are on the DLS. The DLS 9fs will work up to TC1&2 for 2009 and 2010 you will need to look into purchasing the S&C add-on pack to get a compatible 9F, plus other locos, coaches, wagons and a rather good route to boot.

Apart from the aforementioned typo in the kuid table, which before you ask I won't be fixed as the fix would interfere with the kuids of the TC3/S&C 9f's furthermore I don't support anything lower than TC3 these days.
 
Clicking the download button on the DLS website should add the item to the Download Helper list in Content Manager. I found and downloaded them through TS2010's Content Manager so they should be findable using that, however when searching the DLS using Content Manager you should avoid using category search filters, many downloads show up as Misc regardless of what they actually are so setting Category Locomotives may actually filter out a lot of locomotives.
 
" ... the web dls and the dls don't want to conect..."

That's a great pity because the ones on the DLS are up there with the best:

RRC_9F_01.jpg


RRC_9F_02.jpg


If the cab fittings are the problem you could always alias to another built-in cab.

Phil
 
You must log in or register to reply here.

Similar threads

S
The lost Dep's of the BR 9f
2
Replies
25
Views
10K
davies_mike57
D
A
Problems with the 9Fs
Replies
2
Views
1K
stationmistress
S
C
Seeking Missing KUIDS for British Rail Steam assets
Replies
5
Views
2K
clam1952
C
P
Missing KUID's
Replies
6
Views
4K
PendennisCastle
P
J
Missing Kuids Thread - post requests for help finding them here.
Replies
7
Views
3K
PendennisCastle
P
Back
Top