Who is using olegkhim's trackware

RoysTrainz · May 10, 2011

AL.sa if you read this or someone else who speak RU and or ukranian please help to solve this riddle;

s_junctions series 1435 how to switch the motor/lever site from R to L or L to R if not enough room in dense yard junctions jungle.

Olegkhim can you make your very nice examples of
s_junctions 1,2, 3,4 group of junctions for 1435mm in both grey and leto?

Many thanks for the 1435mm update of track and switches you already did.

Last but not least are you planning winterized track as for RU and Ukrain the winters are fierce and snow packed on tracks would be the ultimate

hehe

V rail and junction for TS2010 and TS12.

Roy

al_sa · May 10, 2011

Joosten, I am afraid I didn't understand half of what you wrote, but you could sent a PM to OlegKhim perhaps? I do not understand what you wish to achieve. And you could actually retexture the tracks nicely yourself, just remember to clone them first. Hope that helped.

Cheers

RoysTrainz · May 10, 2011

thanks ok i will

al.sa said:
Joosten, I am afraid I didn't understand half of what you wrote, but you could sent a PM to OlegKhim perhaps? I do not understand what you wish to achieve. And you could actually retexture the tracks nicely yourself, just remember to clone them first. Hope that helped.

Cheers

:hehe::hehe: no problem I will thanks for answering so fast.
beautiful tracks he has.

Roy

mar1971 · May 13, 2011

Tonight I was playing with these 1435 turnouts and they look great. I also had the above mentioned problem. There are no versions of the turnouts with the lever motor on the outside, see picture. Best solution would be to leave the standard lever motor out so you can decide yourself what kind of lever you want. Like the one that is on the left (German version with arrow pointer).

It would also be nice if there were standard size entensions for 4, 4.5 and 5 meter track distance.

Gtx,
Marco

RoysTrainz · May 13, 2011

mar1971 said:
Tonight I was playing with these 1435 turnouts and they look great. I also had the above mentioned problem. There are no versions of the turnouts with the lever on the outside, see picture. Best solution would be to leave the standard lever box out so you can decide yourself what kind of lever you want. Like the one that is on the left (German version with arrow pointer).

It would also be nice if there were standard size entensions for 4, 4.5 and 5 meter track distance.

Gtx,
Marco

Maro,

I did pm Oleg a few times and he not speak any language so this is limited in iuse and 1435mm items only./
You can use fs 5m and longer for straight reference but replace them later with flex track 1435mm.
switch boxes fixed sides is a problem let see if he make some more or thi is a dead end of something really good.

Roy

mar1971 · May 13, 2011

Hi,

Yes I used the fs 5m, look at the picture

I don't like flex track between turnouts. I prefer custom made extension that fit well between the tracks. I hate it when sleepers are like half sized or don't fit. By the way, this extension doesn't fit either ....

Gtx,
Marco

kurachka · May 13, 2011

joosten said:
AL.sa if you read this or someone else who speak RU and or ukranian please help to solve this riddle;

s_junctions series 1435 how to switch the motor/lever site from R to L or L to R if not enough room in dense yard junctions jungle.

Olegkhim can you make your very nice examples of
s_junctions 1,2, 3,4 group of junctions for 1435mm in both grey and leto?

Many thanks for the 1435mm update of track and switches you already did.

Last but not least are you planning winterized track as for RU and Ukrain the winters are fierce and snow packed on tracks would be the ultimatehehe V rail and junction for TS2010 and TS12.

Roy

I speak and write Russian,if You need help,let me know.

OlegKhim · May 13, 2011

kurachka said:
I speak and write Russian,if You need help,let me know.

kurachka,
Поясните пожалуйста коллегам, что на данный момент я очень занят. Проблему я знаю и постараюсь в ближайшее время исправить путем заливки дополнений на DLS под kuid2. Так что ничего не прийдется переустанавливать или удалять тем, кто уже использовал их в своих маршрутах.

Стрелки будут вовсе без монитора и каждый сможет использовать переводной механизм в виде левера своего региона.

На скрине видно, что пользователь использует широкую колею к стрелкам 1435мм. Все мои работы для нестандартной колеи :hehe: имеют в названии обозначение "1435", так же в СМР отображается превью, на которой есть надпись в тексте "1435"
Что касается стрелок - они не требуют настройки. При правильном сборе невидимых рельс внутри стрелки остряки появятся при сохранении сессии или карты автоматически. Если после сохранения остряка нет - значит стрелка собрана не правильно.

FT не обязательно использовать на маршрутах, ими легко укладывать ровные съезды, а в последствии их можно удалить с катрты и заменить сплайном рельс.
Группы сртелок сделаю, раз вам так понравилось, так же рельсы на деревянных шпалах
Стрелок с деревянными шпалами пока не планирую, когда появиться время и желание начну с колеи 1520мм.

mar1971 · May 13, 2011

Hello,

Thanks for the reply. There is one thing I do not understand (I used google translate) and that is if there will be or will be no wooden version of your tracks. I hope google translated this correctly

Спасибо за ответ. Существует одна вещь, я не понимаю (я использовал Google Translate) и это, если Там будет будет или не Версия Вашего деревянные дорожки. Я надеюсь, что это Google переведена правильно

Gtx,
Marco

TRam__ · May 13, 2011

Стрелок с деревянными шпалами пока не планирую, когда появиться время и желание начну с колеи 1520мм.

Oleg doesn't plan the wood tracks in the nearest future. When he will find free time and wish to make wood junctions, he'll going to start from 1520mm gauge.

kurachka · May 13, 2011

Message from OLEGKIM

Message from OLEGKIM.
I am very busy,know about the problem,will fix soon,then upload to DLS "kuid2".Those who already using my work,will not need to reinstall it again.
Junction will be without monitor and user will be able to switch with the help of a lever in each region.
Screen show wide rails for junction 1435mm.All my work for substandard rails mark by "1435",also in CMP it will show"1435"note in text. On junction, user dont need to do any adjustments.With correct assembly, imaginative rails inside junctions, sharp points you will be able to see when you save session or map automatically. If after saved session, sharp points not present then junction assembly incorrect.You dont have to use FT(?) for routes,because you should use it for straight exits(?) ,and then remove it from map,and change to spline rails. Will do more junctions,since You like it so much,and rails on wooden ties. Junctions with wooden ties will have to wait,.......busy.When have more time will start 1520mm rails.

I have translated to the best of my ability,hope this will help.

kurachka · May 13, 2011

OlegKhim said:
kurachka,
Поясните пожалуйста коллегам, что на данный момент я очень занят. Проблему я знаю и постараюсь в ближайшее время исправить путем заливки дополнений на DLS под kuid2. Так что ничего не прийдется переустанавливать или удалять тем, кто уже использовал их в своих маршрутах.

Стрелки будут вовсе без монитора и каждый сможет использовать переводной механизм в виде левера своего региона.

На скрине видно, что пользователь использует широкую колею к стрелкам 1435мм. Все мои работы для нестандартной колеи :hehe: имеют в названии обозначение "1435", так же в СМР отображается превью, на которой есть надпись в тексте "1435"
Что касается стрелок - они не требуют настройки. При правильном сборе невидимых рельс внутри стрелки остряки появятся при сохранении сессии или карты автоматически. Если после сохранения остряка нет - значит стрелка собрана не правильно.

FT не обязательно использовать на маршрутах, ими легко укладывать ровные съезды, а в последствии их можно удалить с катрты и заменить сплайном рельс.
Группы сртелок сделаю, раз вам так понравилось, так же рельсы на деревянных шпалах
Стрелок с деревянными шпалами пока не планирую, когда появиться время и желание начну с колеи 1520мм.

Перевел Транзикам твое письмо,надеюсь они прекратять потеть.

mar1971 · May 14, 2011

Thanks for the translations. I am looking forward to the versions without the lever boxes

RoysTrainz · May 14, 2011

thanks kuracha and Oleg

kurachka said:
Message from OLEGKIM.
I am very busy,know about the problem,will fix soon,then upload to DLS "kuid2".Those who already using my work,will not need to reinstall it again.
Junction will be without monitor and user will be able to switch with the help of a lever in each region.
Screen show wide rails for junction 1435mm.All my work for substandard rails mark by "1435",also in CMP it will show"1435"note in text. On junction, user dont need to do any adjustments.With correct assembly, imaginative rails inside junctions, sharp points you will be able to see when you save session or map automatically. If after saved session, sharp points not present then junction assembly incorrect.You dont have to use FT(?) for routes,because you should use it for straight exits(?) ,and then remove it from map,and change to spline rails. Will do more junctions,since You like it so much,and rails on wooden ties. Junctions with wooden ties will have to wait,.......busy.When have more time will start 1520mm rails.

I have translated to the best of my ability,hope this will help.

fair enough, have time and keep busy with other things and replace when the time has come. Again very nice stuff and much of my liking,

Roy

OlegKhim · May 14, 2011

kurachka, Tram_
Спасибо за перевод, все именно так.
-----------
Thanks for the translation, all that way.

RoysTrainz · May 14, 2011

Kuchara yes thank you very mcu for the help

I see in my last post I missed the thank you to Kurachjk sorry for that.

Roy

OlegKhim · May 14, 2011

Пока переделал основной пак:

Появиться на DLS
<kuid2:354694:900002:1> - S_ switch_mesh_library 1435
<kuid2:354694:900005:1> - S_ switch_mesh_library 1435_L
Это обновление заменит у вас установленные стрелки в СМР и на картах.
Так же добавлю туда новых в виде объектов из нескольких стрелок (улицы, съезды и т.д.)

kurachka · May 14, 2011

latest msg. from OLEGKHIM

joosten said:
I see in my last post I missed the thank you to Kurachjk sorry for that.

Roy

No problem. Here is OLEGKHIM last message.
Look at screen shot,.... Uploaded main pack.Look for it on DLS(kuid in English written with last msg). Above changes will install junctions in CMT and maps.
Will also add at future date,new objects(streets,exits).

RoysTrainz · May 14, 2011

Wow that is what you call fast Oleg thank u

That is really fast, tomorrowmorning i will check dls and see and replace.
Thank you very much.
kurachka thanks for helping out very much appreciated.

roy

kurachka · May 14, 2011

joosten said:
That is really fast, tomorrowmorning i will check dls and see and replace.
Thank you very much.
kurachka thanks for helping out very much appreciated.

roy

No problem.

Who is using olegkhim's trackware

Rembrandt van Trainz

Scandinavia+Russia = me

Rembrandt van Trainz

Member

Rembrandt van Trainz

Member

New member

DG Trainz UP

Member

looking for features

New member

New member

Member

Rembrandt van Trainz

DG Trainz UP

Rembrandt van Trainz

DG Trainz UP

New member

Rembrandt van Trainz

New member