skittlekicks
Member
When I set a path for an EIT (restricted speed to a siding for example) in driver mode the signal is completely dark (not approach lit since the train is on the circuit). I specifically use the Smart Searchlight signals from Jointed Rail and made by weresprada (and the one I use is the JR SL (08) 3-H center 20ft). Without the EIT they work perfectly. On track one at the platform there is a train, but the interlock rule allows me to choose a siding.
Nothing to do with them being obsolete because they are the most recent version. Removing the signal and replacing it corrects it to a point, but the wrong indication is given. 08s are 3 aspects and in a restricted mode the bottom aspect is the restricted speed (either lunar white or green (red-red-green or red-red-lunar white)). What result I'll get is the slow speed aspect (red, green, red). Which is not correct.
I have wondered if the Interlocking path set rule is the culprit (it is up to date for the record), and as I said this has happened in a past route. I think I MART (one dumber than SMRT).
Nothing to do with them being obsolete because they are the most recent version. Removing the signal and replacing it corrects it to a point, but the wrong indication is given. 08s are 3 aspects and in a restricted mode the bottom aspect is the restricted speed (either lunar white or green (red-red-green or red-red-lunar white)). What result I'll get is the slow speed aspect (red, green, red). Which is not correct.
I have wondered if the Interlocking path set rule is the culprit (it is up to date for the record), and as I said this has happened in a past route. I think I MART (one dumber than SMRT).