Underground Tunnels

trainguy97

Trainz NYCTA Veteran
Does anyone know how I can make something like this? I have tried digholes, but they are not working. I am using the UBahn Subway Kit by MCQ.

trainz2011042723500310.jpg
 
Wire Frame and Russian

Does anyone know how I can make something like this? I have tried digholes, but they are not working. I am using the UBahn Subway Kit by MCQ.

An easy way of making a subway is to open wireframe view and lower the items below the grid. I have experimented with the mcq kit but decided not to use it for my layout (County Bavorteinshire) due to it not having height changeability.
n33201202050002.jpg

The kits which I use are the UF-Frankfurt kit and Moscow Metro kit by alterr, the subway station kit from Zatovisualworks and the extra's for zato's pack from Ish6 I'm not implying that you can't use MCQ's kit but I prefer to either build them using the kits or use alterr's prebuilt structures.

Here is a picture of one which I made but sadly no longer have due to a Trainz upgrade, Hard Drive Change and New operating system.
n33201111300000.jpg

This was made from several bits and peices in TS2009.

Images uploaded with ImageShack.us.

Digholes do work, but wireframe is far easier as you can see where everything is and not have to look down a tiny hole.

Finally, where did you find that station as I like the look of it.

Hope this helps.

Regards

Johan
 
Last edited:
As for the stations, I do not know, they were on some random German forum. I will tell you if I see them again.

Thanks for your help. What I am trying to do is create an underground terminal branching out from a 4 track line. Wireframe helps me build underground, I know that, I have used it before. But I want to know how I can create a tunnel entrance just so I can build the tunnels underground, and build over the top of the tunnels.
 
You might like to look at the stations and tunnels made for my representations of Classic Paris Metro Stock - look for Metro... , KUID 275817. They might give you some ideas.

Ray
 
Go to a place called virtual railroader and look for something about "central terminal".

Also, I have a question too. I am trying to build a subway route but cannot find any subway stations. Any help here, because I have no clue what you are talking about with all these "kits"?
 
Kits.

I am trying to build a subway route but cannot find any subway stations. Any help here, because I have no clue what you are talking about with all these "kits"?

The station shown in my picture was built out of assorted bits and pieces.

The Moscow metro kit (aka Zamoskvoretskaya line) is located deep within the bowels of narod.ru aka depostfiles. I have a link here: http://narod.ru/disk/55067557001.bd1...Metro.cdp.html

The Zato and ish subway items can be found ibertrainz download area (fairly obvious) and the other items I used are on Trainzdepot. The MCQ kit is on the DLS as U-Bahn Berlin. The kit was made for TRS2004 so will require a reasonable amount of work. There are some updates on Trainzdepot for it to make it compatible with the more recent editions of Trainz.

The blue train shown in my picture is the C20 by Svoyager. This train was a real pain to fix and if allowed under the DLS cleanup, I am willing to re-upload it to the DLS in fixed TS12 compatible mode. The green train is the UF-U2 train from Trainzdepot. The creator is Alterr.

Hope that clears a few things up for you :)

Regards

Johan
 
Go to a place called virtual railroader and look for something about "central terminal".

Also, I have a question too. I am trying to build a subway route but cannot find any subway stations. Any help here, because I have no clue what you are talking about with all these "kits"?

NYC Subway is my middle name. If you need some stations, I can send you the links. We are just about to get the V2 ones out.
 
Editing Routes

An easy way of making a subway is to open wireframe view and lower the items below the grid. I have experimented with the mcq kit but decided not to use it for my layout (County Bavorteinshire) due to it not having height changeability.
n33201202050002.jpg

The kits which I use are the UF-Frankfurt kit and Moscow Metro kit by alterr, the subway station kit from Zatovisualworks and the extra's for zato's pack from Ish6 I'm not implying that you can't use MCQ's kit but I prefer to either build them using the kits or use alterr's prebuilt structures.

Here is a picture of one which I made but sadly no longer have due to a Trainz upgrade, Hard Drive Change and New operating system.
n33201111300000.jpg

This was made from several bits and peices in TS2009.

Images uploaded with ImageShack.us.

Digholes do work, but wireframe is far easier as you can see where everything is and not have to look down a tiny hole.

Finally, where did you find that station as I like the look of it.

Hope this helps.

Regards

Johan

What is this button called?

AUE2hhpAjalKABEAZdWZlUkEkyEhTfTjyR9dKKAagAAAArbJaJkTsJxhZBHXbJ1mvboYXjhTcQaV5wYuDmp3M0aikTaTxhMhWVU00SRl9ipLFch4UVJGkMc45B5w1pLOZafsG9QemfNG5ZX0I4oJEGdS8ZkNSgwaUhqE0IQF2aYJeTLZXGJGgw8tquY0iSRkyRxhdrRghh1tB3B8mUxhu4TnLrJCjFGmqx7akmgwM1dQhoYEcK9pJzgQVK0LUVuVnRDaK2VdJq6W65EW5tudlRc WuhhpH2WbrZkAAOw==


And how can I find this button on Trainz 2 for iPad since the controls have changed?
 
Welcome to Trainz,
What is this button called?
You will have to host that image on a website or check with "go advanced" posting options if you linked the correct URL, as the image does not show up so we can not help you.

Please note that some functionality of the PC (or Mac) game is not available on the mobile versions.
Please do not kick 1+ year old topics.
 
Last edited:
On post #6, it is said : "later sink it underground". Obviously there is something to modify in the config file to allow this. Normally objects can be moved up and down, but in this case I believe the object "doesn't allow vertical movement" So if this is possible, I would like to know how.
 
Back
Top