TS2010 screenshots

Screen shots

Hi,

There are a lot of good screen captures shown here, could some one show a native screen capture of 1680 x 1050 taken from Trainz 2010EE please?

Regards
Mick
 
Getting a Native Mode shot is more then just taking one in Native Mode. Items have to work in Native Mode. At the moment I am working on a few Native Mode routes. They are not large, because there is just not much native mode content.

JRT
 
Hi,

There are a lot of good screen captures shown here, could some one show a native screen capture of 1680 x 1050 taken from Trainz 2010EE please?

Regards
Mick

hi, Mick

All my screenshots are here in Thread in TS2010 "Native Mode."
The pics were before 1980 x 1080 HDsize and I've reduced them by reason of the forum rules to 800x 600 pix size.

greets ice
 
hi, Mick

All my screenshots are here in Thread in TS2010 "Native Mode."
The pics were before 1980 x 1080 HDsize and I've reduced them by reason of the forum rules to 800x 600 pix size.

greets ice

Hi "ice",

Thanks very much for your screenshots I am always facinated by your model developing.
The reason I have asked for the 1680 x 1050 screen capture is I have been having problems with Trs2006 which in the rail yard view shows my stock to be slightly squashed and wide. I have tried out all the suggestions give at the time but the result is always the same.
I have been concidering buying Trs2010EE but I am not sure if I will end up having the same yard view problems. Distortion spoils Trainz in my humble opinion.
My Monitor is a Samsung SyncMaster 2233 model with a native resolution of 1680 x 1050. I would like to run Trainz at this native setting which is full screen without distortion.
Regards

Mick
 
Hi Mick
TS2009/TS2010 will natively support the wide-screen format of most current LCD's, such as 1680x1050 pixel sizes, and adjust the field of view to suit (thus removing the distortion).

However, if you go too wide (e.g. a pair of 22in monitors), then you will get distortion no matter what, simply because of the wide field of view :)

Zec
 
isaacg_20091229_0014.jpg

isaacg_20091229_0011.jpg

isaacg_20091229_0016.jpg

isaacg_20091229_0020.jpg

isaacg_20091229_0017.jpg
 
Locos and rolling stock for the Milwaukee Road Avery – Drexel Route.

Hallo,

during the last days, some questions came up about locos and rolling stock for TS2010.

Just watch the following slideshow, to see all of the locos and rolling stock for the Milwaukee Road Avery – Drexel Route at TS2010.
Note! The Wood-Chip-Car and the Cabooses are reskins. This was necessary to get a new version of the cars, including other bogeys as well as to resolve some content warnings at CMP.

http://img341.imageshack.us/slideshow/webplayer.php?id=ts2010milwcontentdeckbl.jpg

:)

Your’s TUME
 
Hi "ice",

Thanks very much for your screenshots I am always facinated by your model developing.
The reason I have asked for the 1680 x 1050 screen capture is I have been having problems with Trs2006 which in the rail yard view shows my stock to be slightly squashed and wide. I have tried out all the suggestions give at the time but the result is always the same.
I have been concidering buying Trs2010EE but I am not sure if I will end up having the same yard view problems. Distortion spoils Trainz in my humble opinion.
My Monitor is a Samsung SyncMaster 2233 model with a native resolution of 1680 x 1050. I would like to run Trainz at this native setting which is full screen without distortion.
Regards

Mick

hi, Mick

Thanks for kindly Words.
Trainz2010 has all nativ Resolutions for Monitors.
And for the Aspect all Mode's, 15:9/16:9/16:10/4:3/ or Autodetect.

greets ice
 
Back
Top