pietsilant
New member
Hallo I have a problem with splines the roads are suddenly disappeard, if i plays a piont it comes back it happends with every spline. [ not rails].
thanks.
thanks.
spline
- Thread starter pietsilant
- Start date
mezzoprezzo
Content appreciator
Disappearing splines are usually caused when the Draw Distance sliders in Performance Settings are set too far to the left.
Moving them further to the right should correct the problem, but might cause some visual stuttering on lower end machines.
Moving them further to the right should correct the problem, but might cause some visual stuttering on lower end machines.
shaneturner12
Tutorial Creator
In addition to this, some splines are too poly-heavy to use, as they have a high buffer count.
Shane
Shane
mezzoprezzo
Content appreciator
Good point Shane.
However, the OP says it is happening with every road spline and I would question whether he/she has been "unlucky" enough to have only used hi-poly examples.
It might be helpful if joshejist could post the names and kuid's of some of the problem roads for others to test out.
However, the OP says it is happening with every road spline and I would question whether he/she has been "unlucky" enough to have only used hi-poly examples.
It might be helpful if joshejist could post the names and kuid's of some of the problem roads for others to test out.
shaneturner12
Tutorial Creator
I agree, as I can then check the splines using my method of dealing with them (which is in the thread in my signature). It only takes one hi-poly spline to upset later versions.
Shane
Shane
pietsilant
New member
I want to thank you for all the response.
I think l've done what you asked, i have the slide put to the right even stil disappering roads.
I made some picture's.
What Shane says about the high poly I look at dis index thread and i have take a picture's.
The roads ar made bij mgreen48 <kuid52519:37060><kuid2:52519:37060>.
http://s1276.beta.photobucket.com/u...il_share&_suid=135809431374807817588602592107http://s1276.beta.photobucket.com/u...il_share&_suid=135809404174508871458023798311
systeem os win 7 intel i7 ram 6gb typsys 64bits 2xssd nvida gtx 660.
Many thanks.
If you look in you tube and look voor, Trainz world 2012. or Trainz world 2012 fly, you kan see wat i have build.
I think l've done what you asked, i have the slide put to the right even stil disappering roads.
I made some picture's.
What Shane says about the high poly I look at dis index thread and i have take a picture's.
The roads ar made bij mgreen48 <kuid52519:37060><kuid2:52519:37060>.
http://s1276.beta.photobucket.com/u...il_share&_suid=135809431374807817588602592107http://s1276.beta.photobucket.com/u...il_share&_suid=135809404174508871458023798311
systeem os win 7 intel i7 ram 6gb typsys 64bits 2xssd nvida gtx 660.
Many thanks.
If you look in you tube and look voor, Trainz world 2012. or Trainz world 2012 fly, you kan see wat i have build.
Last edited:
mezzoprezzo
Content appreciator
Your posted image shows the distance sliders set to around half way only.
Have you tried them fully to the right? If not, I suggest you try the second one (Detail landschapselementen) to begin with and if that doesn't work, the first (Max. zichtbare afstand) as well.
I've tried the quoted road spline on my system with no problems, but it's an older version of Trainz so it's not a like for like comparison.
If the above doesn't work perhaps someone else may be able to help. It might be useful to say which version is causing the problem, TS2010 or TS12, so that you get the best advice.
Have you tried them fully to the right? If not, I suggest you try the second one (Detail landschapselementen) to begin with and if that doesn't work, the first (Max. zichtbare afstand) as well.
I've tried the quoted road spline on my system with no problems, but it's an older version of Trainz so it's not a like for like comparison.
If the above doesn't work perhaps someone else may be able to help. It might be useful to say which version is causing the problem, TS2010 or TS12, so that you get the best advice.
shaneturner12
Tutorial Creator
Looking at the data I've seen as well, it looks like whatever the spline is that is referenced by the KUID shown as Worst Buffer Count is the culprit.
Shane
Shane
pietsilant
New member
Hello I put the sliders to the right but the problem is still there.
I think stand hight of the camera have someting te do with it.
Can I fix the camera Height in tranz 2010+2012.
thanks.
I think stand hight of the camera have someting te do with it.
Can I fix the camera Height in tranz 2010+2012.
thanks.
pietsilant
New member
Beste Shane.
I have this all done.
Redist installversion.
Running as adminstrator.
Enable harware acceleraded texture.
Enabdling /disabeling the perfomace statics.
I have two old spline replaced by new higher than 2.7
I think the problem is solved i can move the camera quickly up and down and the splines come back.
thank to you all for the good advices.
I have this all done.
Redist installversion.
Running as adminstrator.
Enable harware acceleraded texture.
Enabdling /disabeling the perfomace statics.
I have two old spline replaced by new higher than 2.7
I think the problem is solved i can move the camera quickly up and down and the splines come back.
thank to you all for the good advices.