SD70I Interior Error.

[jd_demars]

I have managed to get both my CP and CEFX AC4400 units working from World of Trainz. I however have not been able to figure out the problem with the C44-9w and SD70I interiors. I get this error on the CMP for the SD70I:

Error: Attachment point att (a.needle_speedo_conductor) in 'mesh-table\speedo_needle1' was not found.

and these two for the C44-9w:

Error: Attachment point att-parent (throttle_lever) in 'mesh-table\throttle_control_lever-collision-box' was not found.

Error: Attachment point att-parent (dynamicbrake_lever) in 'mesh-table\dynamicbrake_lever-collision-box' was not found.

Super happy about how things are going on my route and with all the rolling stock and motive power I have chosen, just a few minor tweaks left and I will try to get some pics up soon. If anyone has come across these errors or knows how to fix them I would really apreciate the help.

Thanks and Cheers!

 

[rweber95]

The attachment points may be missing from the mesh (which you can't do much about) or it may be a typo in the config.txt file. To check you need to get a copy of PEV's Mesh Text Viewer utility from http://www.members.optusnet.com.au/~villaump/pevsoft.htm which will let you look at the mesh file. The attachment points are listed at the end of the mesh file which the utility will show you. If a typo you can edit the config.txt file to correct, else, if they are missing you can delete their sections in the config.txt file.

Bob Weber

 

[RubeTube]

I have managed to get both my CP and CEFX AC4400 units working from World of Trainz. I however have not been able to figure out the problem with the C44-9w and SD70I interiors. I get this error on the CMP for the SD70I:

Error: Attachment point att (a.needle_speedo_conductor) in 'mesh-table\speedo_needle1' was not found.

and these two for the C44-9w:

Error: Attachment point att-parent (throttle_lever) in 'mesh-table\throttle_control_lever-collision-box' was not found.

Error: Attachment point att-parent (dynamicbrake_lever) in 'mesh-table\dynamicbrake_lever-collision-box' was not found.

Super happy about how things are going on my route and with all the rolling stock and motive power I have chosen, just a few minor tweaks left and I will try to get some pics up soon. If anyone has come across these errors or knows how to fix them I would really apreciate the help.

Thanks and Cheers!

When I installed my UP SD70M from WOT, I had a message pop up similair to that one, but the locomotive still worked fine without editing or error. Sorry, I'm not much help.

 

[jd_demars]

Thank you very much for your advice that did just the trick I now have both of them running without any problems. Its awesome to have some many people with knowledge and experience with this stuff to help out us newbies lol. Thanks again