Real Time Tables...

[redzed333]

Is there a method to give trains a real timetable..?

As an example:

Train One leaves Station One at 10:15

Train Two leaves Station Two at 10:20

Train Three leaves Station One at 10:25

I know there are 'Wait' options but I was wondering if there is another method..

TIA...

 

[shaneturner12]

There is another way, but it requires that the start time on the session stays the same.

Schedule Rule (built-in from TRS2004/6 onwards (I cannot confirm whether it does work with TRS2004, but I can confirm it works with 2006 and above)) will allow you to set times for a train to arrive/leave stations etc (make sure you select the track number and command correctly)

You will probably need 3 schedule rule items (one for each train - make sure you select the right train at the top of the rule) then you can add Drive Schedule as the only command (unless you want him to go to a portal or remove after) for each train in Driver Setup.

Shane

 

[Kennilworth]

Hi

I have been successfully programming the S&C to the working timetable by using the SCS2006 rule. It may not be what you're looking for but I've found it ideal for this sort of thing. It is available on the DLS but if you download it make sure that you also download the manual.

Regards

Brian

 

[redzed333]

Thanks, I'll give it a try..