Problem with GWR home semaphores

[AntonyVW]

Not sure what is happening with these signals. When approaching them the lights are on red. The junction switches correctly and the light goes out but the arm does not move. Any idea what is wrong? If I use the GWR home right branch bracket or left bracket they work fine.

 

[stagecoach]

Which GWR signals are we talking about? There have been a few made over time and some may not work in the newer versions, check they are all from the same batch.

 

[AntonyVW]

The ones in question are:
kuid: 193148:24018
kuid: 4468:25700
kuid:47439:35700
kuid:123327:25700

Just to add some info to this. First off I have tried them on a single line without any junctions in between them. The first couple set themselves to green and lower the arm when driver is first set up but once beyond the first 2 the rest do not change the arm - just go from red light to no light. If I run the loco back to the starting position all the signals are set at red - lights go out but no change in the signal arm itself.
Ive also tried them in a passing junction for a single line using them where the lines come back to a single line. But they operate as originally described. The bracket signals that are placed where the line splits for the junction work without problem.

 

[stagecoach]

You do have a mix of signals there, some are very old versions and I think you may have one that the signal arm did not animate. As you are using T12 I would suggest you get all the newest signals and remove the older ones. You can get all the combinations of old style and newer GWR signals at http://settleandcarlisle.co.uk/ plus get all the target feathers. Search for Sig T created by Bloodnok, These you will need to place after a junctions for the signal to see.

 

[chrisaw]

The same GWR and BR(W) semaphores are available from the DLS, but make sure you tick the version box for the ones you want as they are available with Bloodnok's original or updated script, and I'm not sure which version is on the S&C website.

Chris.

 

[AntonyVW]

Thanks for that. Ive downloaded from S&C and they seem ok of the couple Ive tried but I wil go back and check.