My first Prototypical Layout BNSF Line at Wenatchee WA. 1024 x 768 Screenshots

[steamrodder]

yeah, I have the drawings of the atsf pacific, it is similar to the atsf hudson that I live near

That's awsome living near a Hudson! That's my favorite Steam Locomotive!!! Ever sence I was a kid, I always wonted to get a Lionel Hudson... 42 years later, I now have one, it cost me some bucks 8 years ago, but it was worth every cent, because it's a limited collectors edition. It,s in mint condition never been ran except at the Lionel company.
Do you know what road number the hudson near you is, if I knew that, I can look It up and chances are good that I can find a photo of it.
I have quite a collection of Hudson photos downloaded from the Internet over the years. Please let me know if you can,
it would turn my %$#@@# day into a good day. Thank you Jeremiah,and have a good day. -Robert-:wave:

 

[505657j]

its ATSF 4-6-4 3450

 

[steamrodder]

its ATSF 4-6-4 3450

Thank you, Jeremiah. If I don't have a photo of it, it will be pretty easy to get one.
P.S. I found it! http://www.trainweb.org/rlhs/collection/Other_locomotives/ATSF_3450.html

 

[steamrodder]

Hi all, I needed to get away and take a break from the computer, and to get charged back up into the real world again,
( Bummer) now that I'm back, I'll be posting some new screenshots of what's been added to the map tonight, Untill then
keep checking in. -Robert-:wave:

 

[heyrey]

Thanks started gettin a little bored with the reskins ( theres a thread for that though) but ill give u props on the great reskin!

 

[steamrodder]

Hi all , sorry for the delay in posting new screenies the other night, so here ya go.(Better late than never).

[/URL][/IMG] Bauxite unloading bay

[/URL][/IMG] More detail around the Bauxite unloading bay

[/URL][/IMG] Getting more of the buildings in

[/URL][/IMG] Another view of the plant buildings

[/URL][/IMG] another overall shot of Alcoa with some of the track in place

[/URL][/IMG] another view the Bauxite unload area

[/URL][/IMG] Here's another one

[/URL][/IMG] the last one. Hopefully two more allnighters I'll have this part done! More as I progress. -Robert-

 

[heyrey]

Nice industrial factory!

 

[montanawestren]

WOW very well done I love the baxtuite unloading area at first I thought it was a wood chip loader, do u think it could be used for that? Also what did u use to make that? Nice work anyhow!

 

[steamrodder]

Thanks Heyrey, it sure takes up alot of time to build somethig like this out of what's on the DLS, or with builtin content.

 

[steamrodder]

WOW very well done I love the baxtuite unloading area at first I thought it was a wood chip loader, do u think it could be used for that? Also what did u use to make that? Nice work anyhow!

Thanks Montanawestern, I,ll be making a kuid list of what content that was used to make the structures. Just to give you an idea on what's in one of the, say the Buaxite collector for instance, (that's kind of in back of the unload bay off to the side) I used some 40ft. containers, some of Dave Snow's Cottonseed oil industry structures, diffrent types of bulk loading bays, ect. I'm trying to stay with content that's on the DLS,or can be downloaded using CMP, or built in content. As for using the unloading bay for woodchips I dont see why not, just use a multindustry track and set it up for woodchips.

 

[montanawestren]

Thanks so much for your help! When I first saw the unloading bay it looked like the woodchip unloader at RY timber .

 

[steamrodder]

Thanks so much for your help! When I first saw the unloading bay it looked like the woodchip unloader at RY timber .

Not a problem, if you would like to have a list of what I used, I'll have a kuid list ready in a day or two.

 

[RoysTrainz]

@Steamrodder

very well done the start and detail level but you know detail = time and for sure if you want to keep up the high level of detail you have to calculate a few years to finish this super start to finish! Well done my friend and take your time this is what inspires fellow trainzers to do better and improve their skills

best regards

Roy

 

[steamrodder]

Thank you joosten, sorry for not checking my thread sooner, but I have 4 projects going at the same time, I've got to do some more work on the route before this thread ends down in the basement of the forum.-----I didn't get to work on it much, but I did enough on it to post some new
screenies, I'll be doing that shortly.

 

[steamrodder]

Hi all, Didn't get much done, just this little bit here. I had to find me some more pipe to download,which there is a shortage of. I'm gonna to test out the the latest find From the DLS to see if it will fit. (You can say that the new pipes were shipped from Marz!) Here's some screenies to ponder on. -Robert-

[/URL][/IMG] This is some type of furnace to heat up Cryolite

[/URL][/IMG] Pipes, Tanks, and pump sheds

[/URL][/IMG] The pipes, seems to me a little to big. That's it for now, got to find smaller diameter pipe. -Robert-:wave:

 

[steamrodder]

Hi all, sorry for the delay in updating, but I,ve been working on this other project to get it ready to upload it and share it with my fellow trainzers to have a run on it. I had to repair some issues that I was having problems with. One was the track, had to re-track the map, sence the track I first used, is no longer available any more. This route is in honer of one who has brought to you the famous Northbay Route, and that is our fellow trainzer, Narrowgauge to whom I've been in contact with for his permission to share it with you all. I'm almost done with the repairs with this map so he can check it out. So for now, here's some screenies to tease you with...Make sure you have something to soak up the drool off your keyboard before you look at the screenies.:udrool: I'll be doing some more work on the BNSF route this weekend, untill then, keep on Trainzen all!
-Robert-

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG] By the way, the name of this route is North Bay Version 2. Let me know what you think. Thanks -Robert-

 

[montanawestren]

This remake is very good! keep it up! If u need a good 30in mikado error free in TS12 check out my site I have done a set of reskins of Ben Neal's 2-8-2s error free in TS12.

 

[steamrodder]

This remake is very good! keep it up! If u need a good 30in mikado error free in TS12 check out my site I have done a set of reskins of Ben Neal's 2-8-2s error free in TS12.

Hi MW, Nice job on the mikes, just finished dowloading them. Going to give them a run. -Robert-

 

[GNdome55]

Robert, the work you’ve done so far on your Wenatchee route is amazing. I’d be interested in how you went about putting the large substation together. Where or how did you find all the content, like the large transformers, really all of it. Your work has inspired me to go back and re work my coal power plant.
Gordon