conduit tram track

[georgewcato]

Having downloaded silversmiths fantastic new London E1 tram ,I have tried to get the conduit track to be level with the road surface with several roads I have but the track always to be above the road surface or totally below it. Any answers would be very greatfully received.thanks George PS I am running 2010

 

[paulzmay]

The track is designed to be lowered 0.3m to be just proud of the baseboard surface, with road textures applied straight to the board, and markings such as Andi06's lowered by 0.4m used in conjunction. If you use any other road, you will have to use one that is flat, not cambered, such as those by MGreen48, or Domsarto's series 2.

Paul

 

[georgewcato]

answer

to answer my problem and to inform others who want to use this form of tram track.I used Brook's stone setted road system and used andi06 conduit track set at 0.085 height which proved to be perfect and correct for London Streets outlook.

 

[georgewcato]

final answer

I have now solved the problem with conduit track and roads.I started off with andi06 Track (rails only) street kuid2:122285:1113:2 and in the config file I changed the track to 122285:1104 and when you install this the cobbled street will have the conduit track built in ready for use with no mucking about with height adjustment to the track.all the best George