c20 cab problem

[demon_eric]

can someone please help me to get the c20 ab unit and m unit cabs working i only get parts of it

 

[LtCarman]

If you need help starting it, here's a direct quote from UP6936:

Here is a short description of how to activate a C20.

When you activate a C20, you insert your key into the keylock on the left hand rear cab wall. (This step is not implemented in the model, the key is alredy inserted). You turn the key form Från (Off) to Till (On).

You then turn the knob above the keylock to the right Till (On) position. The knob is spring loaded so it goes back to the staight-up position. You will know hear the train come to life. The ventilation starts, the traction motor blowers start, the radio och ATP system make a self-check, the computer comes to life and with that the IDU (Information Display Unit) comes to life. (From v1.2 of the car, this step is no longer required - the car is activ when placed on the layout. The knob still works, however.)

You now have to log on to the main computer. (This step is not and will not be included in the model.) The IDU will now show the train status.

Once the train is activated, you go through a checklist testing and checking various functions of the train - doors, front and rear lights, horn, info system, radio, etc, etc. This is called IAT, Iordningställande Av Tåg, i.e. Readying Of Train. (This is not implemented in the model but nothing stops you from doing it).

Now you are ready to go (provided you could complete the checklist without problems)!

If evetything is OK, the green "Klart" lamp should be on. The train is by default in forward so you press the safety pedal (not implemented in the model) and move the driving stick forward. The stick is stepless (not really implemented in the model where it has 8 steps).

Don't forget to set your destination code, train length, route number and train number with the thumbwheel controls on top of the left hand panel. And don't forget to switch on the lights in the passenger compartment.

Deactivating the train is really a reversal of this procedure.

Turn the knob above the keylock to the left Från (Off) position and the train is deactivating. You hear all the systems shut down. You turn your key to the Från (OFF) position and remove it. (You can't remove the key in the model). On your way out, you close the cab door by pushing th Close Cab Door button (trains are NEVER left with a cab door open).

Now you are (almost) a competent C20 driver! Good Luck!!

//Lars S

Other information can be found here: http://forums.auran.com/trainz/showthread.php?t=4542&highlight=svoyager

It is truly a spectacular train. One of the best out there. Also, try to be more specific about your problem. Good luck!

 

[demon_eric]

i'll get some pictures soon

 

[demon_eric]

the c20 cabs are ment to look like this

but the cabs on the c20 i have downloaded look like this

please help

 

[LtCarman]

Are you missing any dependencies?

 

[demon_eric]

no i think it has something to do with the configuration in the cab kuids

 

[LtCarman]

If you downloaded this from svoyager's website, did you download the full pack or each pack one by one? If you downloaded them one by one, make sure you downloaded them all. If that's not it, then I'm out of solutions. Sorry if I didn't help much.

 

[demon_eric]

i downloaded it by full pack