BNSF50's signals won't activate????

[k5laguy]

BNSF50's US signal crossing lights and gate do not turn on at all. I am using them in Train 2009. Any info is need please.

Thanks.

 

[evan123]

You need to contact the maintenance of way foreman.

 

[RRSignal]

They need to be joined to track (as in join the splines) to work.

 

[k5laguy]

Thanks that is why. The problem is, is that I use double track splines, and they don't connect to the crossing spline( the XING connecters are wide)

 

[RRSignal]

I've had that problem too, and I'm not sure if there's a workaround, or if it depends on the kind of road you use. I know bnsf50 just updated his crossings, and you may wish to look for a recent thread in the Freeware section, but I haven't tried the new crossings yet. Alternatively, you may be able to bring the road spline up to the crossing plate attachment and hold the SHIFT key while releasing the mouse button, preventing them from joining. Then, if having traffic move through the crossing is important, connect the road splines with invisible road. I haven't tried this yet either though.

 

[bnsf50]

You cannot connect double/dual track to an object. Never have been able to. You have to stop the dual track back a ways from the object, in this case the crossing and run two single tracks up to the crossing. And if you use my roads they will connect just fine as my roads are set a 0 level so they don't float. If you hook a floating road up it will cover up the tracks. As to why are there floating roads, you can ask Rob Shaw why they float.:hehe: