AJS Invisible Station Problem

L

lewisner

Well-known member
Hi all, I have installed several "AJS Invisible Station 1T 3.5" on my two routes a while ago and they have all developed the same problem - namely the paasengers have sunk down into the platform and are spread out out over the track.Deleting them and reinstalling them has no effect and if I try to Edit them I get this message -

ERROR: PropertyBrowserRefresh0 not handled

A script error occurred while attempting to edit the properties of this asset.

Does anyone know what has caused this and the solution if any?

Thanks in advance.

4795535467_f5d0c70923_b.jpg
 
I had a similar problem previously - I think (from memory) it is dependency related (make sure you have all the dependencies, and that none of them are faulty if you are using TRS2006 or above. andi06 may be able to advise further, as it is his content.

Shane
 
Thanks Shane. In CMP it shows 1 unknown KUID - 122285:3499 and two missing dependencies. AJS Spline Eraser KUID 122285:1002 and AJS Track Eraser 122285:1003. When I look for these I find that I have the updated versions but not the older versions.
 
Hi Red Rattler I have read both the linked thread and it's sub link and frankly I am none the wiser. What do I need to do to fix the problem? The answer doesn't seem to be there in any meaningful format.
 
OK,first thing to do is to download the missing dependencies. If you drag the asset in question across to the download helper box, it should identify the required (including unknown) assets automatically, all you will need to do then is click Start, and sit back and wait for the downloads to finish.

Shane
 
Hi Shane that was more or less the first thing I tried but it didn't work.Since I only had a few of them installed I have (regretfully) deleted them.
 
Quick question.

Did you download all the station kit from Andi's site or via the CMP?
 
Not sure.It appears to be built in because it won't let me delete it.There was another problem before this because when I routed a train into platform 1 of Sunderland station it would always derail.I thought the track wasn't properly attached but deleting the IS and reinstalling made no difference.
 
lewisner said:
Not sure.It appears to be built in because it won't let me delete it.There was another problem before this because when I routed a train into platform 1 of Sunderland station it would always derail.I thought the track wasn't properly attached but deleting the IS and reinstalling made no difference.
Click to expand...


Hmmm. And you're running this on TS09? If so, I can get it all to work but only in compatability mode. I downloaded all the station packs from Andi's own site as I don't recall having any of it built in.

http://www.ajsmith.nildram.co.uk/trs/index.shtml

Currently, only one of the actual stations shows without an error although everything works okay. I would be inclined to go to his site and get the stuff from there and see if that fixes yer problem. If not, I'm afraid I'm out of suggestions.

Cheers.
Innis.
 
Cheers! I'll have a go at his site.I think I may have downloaded the stations in TRS2006 but never used them.Having said that there all kinds of strange things going on in TRS2009 - I think it's a bit like Skynet from the Terminator movies.:(
 
lewisner said:
Cheers! I'll have a go at his site.I think I may have downloaded the stations in TRS2006 but never used them.Having said that there all kinds of strange things going on in TRS2009 - I think it's a bit like Skynet from the Terminator movies.:(
Click to expand...

Haha. I'll worry when I start seeing consists with an unfriendly agenda at every turn with !
 
I have a similar problem, where the people are floating about 2m above the ground, all trains derail through the station, and there are railroad tracks all over the ground (under cars in the parking lot, under the people, around buildings, etc.)

Not sure how to fix this. I've tried downloading everything from the DLS, but CM insists the content isn't there to be downloaded. I finally got it downloaded and, I think, installed (can't be very certain with CM2) with no improvement. I tried the URL from above and it's broken. Any ideas?

Adam
 
AJS Stations

If you are having problems with the passenger heights, open the scenery tab, click on the '?' button then click on the station. A box will pop up and if you look though the options you can change the passenger heights, the station size and shape, the type of station etc. Some of the AJS stations do not have this feature though

Oh, and they do work in Trainz 2009 as that's what I use

Dan
 
Last edited:
Thanks for the link and the ideas. I'm downloading them now and will re-check it out tomorrow. Hope I'm getting enough for the Morris & Sussex to work properly.

BTW, I'm running '09 now, too.

Adam
 
No more derails, so that's improved. I also got the people lowered. They were set to be 1.3m above the ground!

Why are there railroad tracks all over the place? What am I missing?

TIA,

Adam
 
You must log in or register to reply here.

Similar threads

P
How do you change the platform numbers for AJS Invisible Station?
Replies
2
Views
572
PhilChorusch01
P
C
A Small Issue With The LNER Gresley Coaches In Trainz 2019
Replies
18
Views
2K
dundun92
D
A
how to change passenger height on invisible stations?
Replies
3
Views
614
AntonyVW
A
P
Driver set up - script error
Replies
7
Views
255
paul_r
P
S
Interlocking Tower(s) SP5 Bug?
Replies
3
Views
676
skittlekicks
S
Back
Top