Australian screenshots

[Azervich]

ANR 700 sitting at Wodonga Loco.



Cheers.

[grazlash]

Great work Azza, very nice looking
cheers
Graeme

[Stefmiz]

Bonnie Doon Rail Bridge

[taggy]

Getting close to a release I think. I'll post in the Freeware Announcements thread when this happens.

Ranger_51

Signals look fantastic mate, looking forward to trying them out.
One small thing I picked up, the last imagine shows a turnout repeater illuminated, so that signal should be showing a medium, Green over yellow. This indicates that the next signal is showing a full turnout indication of yellow over yellow.

[lspdyiu]

...............

[lspdyiu]

Ranger_51

👍 work on making these signals, very impressive indeed just wondering you know on the 3rd image shouldn’t the signal be displaying a green over yellow when the turnout repeater is lit to give attention to a driver that he is encountering a divergence ahead on the next junction signal.

Will you also be modeling a similar signal variant that is capable of displaying a low speed/close up indicator on both single and double colour light signals. It would be grateful to have them working at least.

Rancid 56025

[Kyholm]

Hey all,

Couple of MZ's with a Melbourne - Sydney, train weight was 2,700 tonnes (1,350 tonnes each) and stalled about 50k's out of Albury, I was hoping momentum would get me over the hill but that wasn't to happen as it was a 1in100 for 1km then it started the 1in66 climb (1.5%).






Cheers.

The Mz looks bit wrong, as if the front is too wedged. I was raised with Class Mz in Denmark so I know almost every detail of it.



Try to compare it a bit, or as best as you can, but you can easily see that the one made in Trainz looks bit wrong.

[hewi12]

Hey all, been playing around with TRS19 some more as of late.



Regards

[ryanspringer2294]

Does anyone know why the seats are sticking out, and how I would go about fixing it?

[trainfan2017]

The Mz looks bit wrong, as if the front is too wedged. I was raised with Class Mz in Denmark so I know almost every detail of it.


Try to compare it a bit, or as best as you can, but you can easily see that the one made in Trainz looks bit wrong.

It's a pretty good effort without access to any diagrams.
If you think you can do better I'd like to see your attempt!

[taggy]

Hey all, been playing around with TRS19 some more as of late.



Regards

Ok wow, I had to look twice then. I honestly thought I was looking at a picture of a real train. I wish I could have the lighting settings you have. haha

[Roy3b3]

I've started making several variations to my driveways and paths already and added a 90 degree corner asset. This one includes drain grating which I hadn't previously thought about.

They are designed to work with 'textured roads' or DLS roads without footpaths. The driveways will be set at 3m, 4.3m, 5m, 6m and 9m.

The spline paths at this stage will be either concrete slabs only or concrete slabs with a grassy strip.

The corner piece will fit both footpath splines.

I've still yet to find how to use 'Attachment Maker' on the fixed assets. A slow learning curve for me.
Cheers,

Roy

[hiyo]

Hey all, been playing around with TRS19 some more as of late.

Regards

Bloody hell I'm dying to know what your environment settings are! Looks fantastic!

[hiyo]

Does anyone know why the seats are sticking out, and how I would go about fixing it?

The solution was posted in this thread sometime over the past couple of years. I don't have it book marked but saved the text on my computer - here it is below, apologies to the original poster.

---

For those who are having trouble with Davido's NSWGR 900 + 800 sets with seating coming out the sides after installing SP3, just delete this file below from the config of each rail car and close the gap by one space up after deleting
anim "900_body/seats.kin"

What you should be left with is......

mesh-table
{
default
{
auto-create 1
mesh "800tfrrev_body/800tfrrev_body.im"
}

left-passenger-door
{
mesh "800tfrrev_body/left-passenger-door.im"
anim "800tfrrev_body/left-passenger-door.kin"
auto-create 1
}

right-passenger-door
{
mesh "800tfrrev_body/right-passenger-door.im"
anim "800tfrrev_body/right-passenger-door.kin"
auto-create 1
}

daymesh
{
mesh "800tfrrev_body/daymesh.im"
}

darkmesh
{
mesh "800tfrrev_body/darkmesh.im"
}

shadow
{
mesh "800tfrrev_body/shadow.im"
}
}


bogeys
{
bogey01
{
reversed 0
bogey <kuid:60723:1112>
}

bogey02
{
reversed 0
bogey <kuid:60723:1112>
}
}


string-table
{
str_property_name1 "Running Number"
str_property_desc1 "Change Running Number"
str_property_name2 "Maximum 36 Passengers"
str_property_desc2 "Initial Passenger Load at Session Start"
}


queues
{
pass_q
{
passenger-queue "1"
size 36
initial-count 0
product-kuid <kuid:-3:10060>

attachment-points
{
0 "a.passit13"
1 "a.passit29"
2 "a.passit19"
3 "a.passit32"
4 "a.passit08"
5 "a.passit10"
6 "a.passit28"
7 "a.passit35"
8 "a.passit27"
9 "a.passit06"
10 "a.passit09"
11 "a.passit15"
12 "a.passit31"
13 "a.passit04"
14 "a.passit36"
15 "a.passit26"
16 "a.passit02"
17 "a.passit14"
18 "a.passit11"
19 "a.passit30"
20 "a.passit33"
21 "a.passit34"
22 "a.passit23"
23 "a.passit22"
24 "a.passit16"
25 "a.passit25"
26 "a.passit01"
27 "a.passit21"
28 "a.passit18"
29 "a.passit07"
30 "a.passit03"
31 "a.passit20"
32 "a.passit05"
33 "a.passit12"
34 "a.passit17"
35 "a.passit24"
}

allowed-products
{
0 <kuid:-3:10060>
}
}
}


thumbnails
{
0
{
image "800tfr_art/icon.tga"
width 128
height 64
}

1
{
image "800tfr_art/preview.jpg"
width 240
height 180
}
}


kuid-table
{
pass_ass <kuid:-3:10060>
0 <kuid:-1:42004201>
1 <kuid:60723:1112>
2 <kuid:60723:1131>
}

[Kyholm]

Matter of fact, I am working on Class Mz. But I see you take it rather personally that I was criticizing it, which I don't blame you for. I don't say #d is easy, and the diagrams are hard to find. But I found this website with PDF of a diagram of series 3.

http://jernbane.vps.powernet.dk/cata...=3%3A16/qsr=Mz

But yes, it's a good effort and it's actually minor edits to make to be honest, compared to what some of my country fellows have done, even with diagrams