Australian screenshots

26685283_10213029971401694_5271134192590559152_o.jpg

T413 leads the morning goods out of Shelley, having just entered the long down hill run to Beetoomba and beyond.

26240882_10213029970401669_2601320268920981726_o.jpg

With the dynamic brake still whining, T413 picks up some speed on one of the faster sections.

26677966_10213029970281666_5649152814897254396_o.jpg

Just outside Beetoomba, the T begins to slow to stop at the station for a few moments.

26233655_10213029970441670_8512333486761163142_o.jpg

With no goods loading for Beetoomba today, T413 hurries out of the station to continue onwards to Shelley.

Regards
Zec
 
Wonderful screenshots Zec. Captured the Aussie bush beautifully.

After seeing so much modern transport lately, I sometimes like looking back to the bygone eras, to when I was a kid.

Back to the 1950s between Sydney Central Terminus and Redfern Station, 'Red Rattlers' were everywhere and yet sometimes you might be lucky to see a Silver U Set heading to a far away place.
Then there were the good old 'Railmotors' mostly on time, a little noisy, but always got you, to where you were going.

229c8ce5edf234aa944efc60204d4157.jpg

An early morning shot of a NSWGR 43 Class passenger unit for the terminus, as a NSWGR 720/620 set switches tracks to Redfern #2 platform.
f6590f44e21f7ea41f0d0b991dfc83a5.jpg

Cheers,
Roy
 
Thanks blueodessey. Azervich is right, the bogies I've made are 1067mm/3ft 6in gauge but you can easily change bogies in Trainz.

For loading gauge, this wagon is 9ft 6in wide, 12ft 2in high.
 
I received a PM last night from sum one here having trouble with one of my pieces of content and at the moment my putor is blue screening so I don’t have decent access to fix anything let alone run trainz,
Life has also taken an unexpected turn so I won’t be in a place to fix the putor for awhile so as far as my content is concerned ya on ya own sums for awhile fella’s sorry bout that.
Cheers Mick.
 
matruck said:
I received a PM last night from sum one here having trouble with one of my pieces of content and at the moment my putor is blue screening so I don’t have decent access to fix anything let alone run trainz,
Life has also taken an unexpected turn so I won’t be in a place to fix the putor for awhile so as far as my content is concerned ya on ya own sums for awhile fella’s sorry bout that.
Cheers Mick.
Click to expand...

I'm sure that if that person was to post their problem here someone would be able to help them.

Cheers, Stefan
 
Hey Guys,,

If anyone is interested, today Sunday on SBS Viceland, they have the full train ride on the Ghan.

Some passenger views as well as cab views. Could be worth a look.

Cheers,
Roy

EDIT: It's 1:15pm and been going for several hours now.
 
Last edited:
matruck said:
I received a PM last night from sum one here having trouble with one of my pieces of content and at the moment my putor is blue screening so I don’t have decent access to fix anything let alone run trainz,
Life has also taken an unexpected turn so I won’t be in a place to fix the putor for awhile so as far as my content is concerned ya on ya own sums for awhile fella’s sorry bout that.
Cheers Mick.
Click to expand...
Hi guys,

I'm the unfortunate soul Mick is referring to and the problem I have is with one of his creations - <kuid:287284:100270> Aus Relay Box Modern - which is used on Roy's Sydney Central & Sydney Harbour V4 route. Roy doesn't have a problem with it but my CM reports the follow:

; <kuid:287284:100270> Validating <kuid:287284:100270>
! <kuid:287284:100270> VE48: This asset uses an obsolete trainz-build number. Trainz-build numbers below 3.5 are no longer supported.
- <kuid:287284:100270> VE65: The *.texture.txt file is missing for texture resource 'map1.texture'.
- <kuid:287284:100270> VE65: The *.texture.txt file is missing for texture resource 'normal-normal.texture'.
! <kuid:287284:100270> VE109: The low-detail meshes total more than 500 polygons. This may have a negative impact on performance: 0: 1416


Can someone please advise how I can ‘fix’ these errors? I'm not worried by the warnings.

Thanks in advance.
 
Last edited:
Had to try out the New VR T S1 flatops

Original loco broke down at Ringwood this T was shunting there and was put to work hauling this passenger of CW, AW, ABW, BW, BE, BCE to also trying out passenger cars I found on DLS.

Tom
Just-a-Test-of-the-new-T-flat-tops%2C-orginal-loco-broke-down-left-at-Ringwood-so-T-now-hauling--CW%2C-AW%2C-ABW%2C-BW-BE%2C-BCE.jpg
 
Hey Ron,

I don't know whether this may shed any light at all.

I 'opened for editing' Mick's <kuid:287284:100270> Aus Relay Box Modern to see if there was something that may need updating.

The .texture.txt files are not listed and it does show Trainz build 3.1 as Installed Payware,.. and in exiting,... I used 'Revert if Unchanged' which still shows as 'No errors or warnings'.

So the asset is still usable.

Is it possible that 'Committing' the asset instead, might cause it to raise the error and warnings.

I've used much older assets in my route before. In fact in my latest route, of 2218 assets there are 357 with Trainz Build 1.3 and still functioning.

I like Mick's work, so if it can't be rectified at your end, just delete it. Mick also has a built-in scenery asset <kuid:287284:100269> Aus Relay Box Modern which could be used as replacement.

Cheers,.
Roy

 
Now I haven't seen this lately. The commuters in the NSW SRA SDS passenger cars got to experience a 'thrill-a-minute' as their seats pivoted and were exposed to the elements.
95c930ffcbd61a51d666a6a307176c3d.jpg

A quick replacement and they were on their way.
2cc92b7295c09cca3e9a3c500907902d.jpg

Three freight trains pass each other on my new layout.

8669f748ed76215d42ce9156c3bf96cc.jpg

Cheers,
Roy
 
Nice shots Tim. Keep up the good work mate.

I've been doing a little work on a route I started in TS12, then imported into TANE.

It's purely fictional and based on a HO gauge layout I built in my basement back in the 1970s. It was designed around a single track that traverses the layout 6 times, stopping at 4 stations and every platform, and in both directions. There are two active industries that also uses the same track, with a couple more intended.

Here are a few screenshots.
495ee67d6c4fbd95ab966c89a2b9f7a9.jpg

111819a03b082d3cc13dcfaafa2fba50.jpg

af5104c25f2c0511d1ba8b343a64c21d.jpg

046792ed33b03576ac7e2f8f63d2f5d4.jpg

3b24c97c2c027b7fe0537638a012d7f5.jpg

Cheers,
Roy
 
X31 and VL356 prepare to depart the yard at Merriford with their loaded paper train, having awaited the arrival of the evening down passenger service...

f8c66bd356082284081e2ce2f0a5bf89.jpg
 
Another Day another train
This time 23RM & 56MT that were assigned to Healsville, I know the model is of a 103HP it should be a 153HP but they are very simular there is the correct engine files on DLS and even though they Have standard gauge bogies still look good and ran ok.

Tom

23RM-%26-56MT-at-Healsville.jpg
 
Last edited:
Roy3b3 said:
Hey Ron,

I don't know whether this may shed any light at all.

I 'opened for editing' Mick's <kuid:287284:100270> Aus Relay Box Modern to see if there was something that may need updating.

The .texture.txt files are not listed and it does show Trainz build 3.1 as Installed Payware,.. and in exiting,... I used 'Revert if Unchanged' which still shows as 'No errors or warnings'.

So the asset is still usable.

Is it possible that 'Committing' the asset instead, might cause it to raise the error and warnings.

I've used much older assets in my route before. In fact in my latest route, of 2218 assets there are 357 with Trainz Build 1.3 and still functioning.

I like Mick's work, so if it can't be rectified at your end, just delete it. Mick also has a built-in scenery asset <kuid:287284:100269> Aus Relay Box Modern which could be used as replacement.

Cheers,.
Roy
Click to expand...
Hi Roy,

I tried the Reverting if Unchanged but that didn't work so I did what you suggested and replaced it with <kuid:287284:100269> Aus Relay Box Modern.

Thanks for your help.
 
Nice screenshot Tim. At first glance I thought it may have been the 'Blue Suede Express' heading to Parkes for the Elvis Festival.

Cheers mate,
Roy
 
I was under the impression NSW crews were not fond of the mighty Xs :p

P18 leads X34 and X45 on a wagon transfer from Merriford. The latter of the Xs was in shutdown and towed dead.

Waiting for a cross with a DOWN pass with X35
3495ff87a06307f40ea1edd450b54e4c.jpg


An overview of Merriford yard with Y150 as yard pilot just prior to departure
b240807e70c8ca69024b8c218fdec805.jpg


Crossing Corby Creek
333ad33504835eafc64ec2d18ba417c0.jpg


Approaching Lorbank Tunnel
357018fabd36842721441a503f75492f.jpg


A pause at Rivermoor to collect the staff
346c8b3652d681aca644811f4eaa6d8d.jpg


Finally cruising down to Northport where the train terminated.
0936d23ed8c352c7bf192034179c3f7f.jpg


Cheers
Tim
 
You must log in or register to reply here.

Similar threads

H
hi again auran software but the uk hi res screenshotsc thread stops at 945 when their was upto 2245 posts before new forum
Replies
0
Views
549
harry250
H
H
but the uk hi res screenshotsc thread stops at 945 when their was upto 2245 posts before new forum
Replies
1
Views
694
DARTrider
D
H
rail crossing and road intersection
Replies
0
Views
115
Herlev
H
J
Train stops after two lights'
Replies
7
Views
324
JCitron
J
B
Passenger Train Stopping At Engine
2
Replies
22
Views
729
MasterTracklayer
M
Back
Top