Sebeno Lake Route

P

Paul_Bert

Train Enthusiast
The Sabeno Lake route does not work for me in build 114800, but it did in build 111951.
The textures and some other features appear but no track or trains.

I uninstalled the route and re-installed the route hoping this would fix it, but with no success.

Is this an issue with build 114800 or am I doing something wrong?
 
hiya Paul, a lot was changed in Sebino lately, did you update the DLC after installing SP4?
Just drove an old orient express like train and route looks nice, with a few little flaws
-road disappears under ground texture
-a diner car with loads of details but no glass in the windows
-tunnel exit that was moved mysteriously

but enjoyed it here SP4(regional euro)

btw i did not remove it, but just let it update here
 
Last edited:
Paul_Bert said:
The Sabeno Lake route does not work for me in build 114800, but it did in build 111951.
The textures and some other features appear but no track or trains.

I uninstalled the route and re-installed the route hoping this would fix it, but with no success.

Is this an issue with build 114800 or am I doing something wrong?
Click to expand...


Same problem here although didn't update yet the DLC as suggested at least on tha Pisogne-Rovato route.
BTW... very well done route, is about 15 miles frome here.
 
Likewise, My copy of Sebino Lake has not updated since SP4 was released? Interestingly, the launcher keeps indicating that there is something available in the content store ("Content Store" keeps modulating between yellow & white text), but nothing shows up when I look.

I've been waiting for an update/extension for Sebino Lake that has been discussed for some time. Is that what is supposed to have been released?

Cheers,
Piere.
 
last update (I did after installing SP4)
<kuid2:57230:100074:14> Sebino Lake, Italy (1980s), Packaged,Payware 241.7MB build 4.7
 
G.M. said:
last update (I did after installing SP4)
<kuid2:57230:100074:14> Sebino Lake, Italy (1980s), Packaged,Payware 241.7MB build 4.7
Click to expand...

Hmm, that's the same version I have, but it was installed in December last year.

Cheers,
Piere.
 
Same version I have as well, so it is pre-SP4. I just tried running the <kuid2:212731:501127:1> Pro Trainz® ETR 1000 - Highspeed Run Session. The session was ready to go before I had track or train, but I just waited and they eventually came up. However, only a few minutes into the session, just after the speed goes up to 150KM, the track disappeared and the bridge was missing over the river. The train kept going OK, so maybe it is a refresh issue, but there was no more track to be seen ahead. So, there does seem to be an issue. G.M., do you think we should try uninstalling and reinstalling Sebino Lake and/or the sessions? THere does not appear to be any post-SP4 update.
 
These are currently the latest versions:

<kuid2:212731:8001:7> Brescia - Pisogne
<kuid2:523:19723761:2> Multiplayer Session
<kuid2:212731:8000:6> Rovato freight transport
<kuid2:212731:8002:6> Pisogne - Rovato Borgo
<kuid2:212731:8003:6> Maintenance Service
<kuid2:212731:501126:2> Pro Trainz® ETR 1000 - Frecciarossa 9705
<kuid2:212731:501407:6> Pro Trainz®: 'Orient Express Part 1' by 3DZUG
<kuid2:212731:501127:1> Pro Trainz® ETR 1000 - Highspeed Run
<kuid2:212731:501408:3> Pro Trainz®: 'Orient Express Part 2' by 3DZUG

Paul - Does Content Manager show any errors or "modified" or "not active" status ?

For those having issues, please provide your hardware and OS details.
Also your performance settings.
 
Last edited:
Forester1 said:
Same version I have as well, so it is pre-SP4. I just tried running the <kuid2:212731:501127:1> Pro Trainz® ETR 1000 - Highspeed Run Session. The session was ready to go before I had track or train, but I just waited and they eventually came up. However, only a few minutes into the session, just after the speed goes up to 150KM, the track disappeared and the bridge was missing over the river. The train kept going OK, so maybe it is a refresh issue, but there was no more track to be seen ahead. So, there does seem to be an issue. G.M., do you think we should try uninstalling and reinstalling Sebino Lake and/or the sessions? There does not appear to be any post-SP4 update.
Click to expand...

I had no problem with it. I got up to 368 kph before I quit. There was no drop out of any graphics during the session.
 
To test I just drove session Brescia-Pisogne in Sebino and SP4
-nice fly to the train at start
-lovely scenery
-passenger doors don't open on this train (maybe I am spoiled)
-no passengers you see when do view details
-DCC button not enough steps to actually drive the speed you want
-same with buttons W and X (steps too big)
-had 3 sudden quite unnatural forced stops, when a lil over speed


but hey it works here and enjoyed it


Not sure why people have troubles, I never played it in SP2 or SP3
so that's probably why I updated it later than others did.
 
Ran the Protrainz part 1, and the only things I found were many floating tunnel portals, and areas of tunnel track/spline that were misaligned. Not sure if it's the track or the tunnel spline.
 
Tony_Hilliam said:
These are currently the latest versions:

<kuid2:212731:8001:7> Brescia - Pisogne
<kuid2:523:19723761:2> Multiplayer Session
<kuid2:212731:8000:6> Rovato freight transport
<kuid2:212731:8002:6> Pisogne - Rovato Borgo
<kuid2:212731:8003:6> Maintenance Service
<kuid2:212731:501126:2> Pro Trainz® ETR 1000 - Frecciarossa 9705
<kuid2:212731:501407:6> Pro Trainz®: 'Orient Express Part 1' by 3DZUG
<kuid2:212731:501127:1> Pro Trainz® ETR 1000 - Highspeed Run
<kuid2:212731:501408:3> Pro Trainz®: 'Orient Express Part 2' by 3DZUG

Paul - Does Content Manager show any errors or "modified" or "not active" status ?

For those having issues, please provide your hardware and OS details.
Also your performance settings.
Click to expand...

My issue is if I "select Route" and then "View Sessions" and then go to "edit session" I get nothing but the baseboards and texture. However if I select "drive session" everything loads OK and the session runs correctly. From the driver mode I can switch back OK into the surveyor mode and everything is as expected. So the problem only exists if I try to enter "edit session" as the first command I choose.

I have entered this as a ticket so there is a record of the issue.
 
ricomon35 said:
Ran the Protrainz part 1, and the only things I found were many floating tunnel portals, and areas of tunnel track/spline that were misaligned. Not sure if it's the track or the tunnel spline.
Click to expand...

I have also noticed at least two examples of the tunnel track/spline being misaligned. The train runs OK but is running way outside the tunnel.
 
The tunnel misalignment has always been there. I reported that way back when the route was first released.

Crickets...
 
You must log in or register to reply here.

Similar threads

F
Sebino Lake missing dependences - Solved
Replies
3
Views
229
fant_autentico
F
M
Online Patch Error
Replies
7
Views
644
JCitron
J
P
HD Terrain invisible (Philskene's Clear Lake Route).
Replies
3
Views
534
Piere
P
D
CPR Slocan Lake Branch rail operations interaction with the CPR Lake Route Sternwheelers and Rail barges circa 1902
Replies
3
Views
360
JCitron
J
V
When create my own session, why I must save a new route?
Replies
13
Views
688
PhilChorusch01
P
Back
Top