More - Train Not Stopping at Station

There may be a relationship to the engine/locomotive that is used. A GP8 performs as expected but an RS3 just passes through a station stopping way beyond the trackmark, doing a quick load and proceeding. The GP8 stops at the trackmark, passengers are exchanged and it proceeds to the next station.

The instruction sequence is:
Drive to and stop at trackmark
Load Passenger instruction executes
Passengers are exchanged
Train proceeds

I have most stations setup with trackmarks and no issues on various length platforms.
Platform Passenger-Lo is the platform at all stations. I normally use just a two car train since this is a local route on the coast of Maine - Portland, ME.-> North. Main line(2 track) with four multi-city branches.

Looked at the radius in the config file and they are all set at 30m. This is to big of an overlap, I would reduce them, my 60m track is set at 5m, 25m, 25m, 5m. I also think that for a short track there are to many trigger points, but you would need to change the .gs file as well to reduce the number.

Interesting, lots of trigger points, in various amounts, visually seems to be the action.