Hi,
I am trying to control the passage of vessels passing through a canal lock. I started with just a crossing with ASB triggers and controller. All worked as expected. I then added a lock and tested that a vessel would pass through succesfully in either direction, restarting after each passage. I then setup a case where both vessels arrived at the lock at about the same time. One was blocked while the other passed through. The problem is that after the first vessel passed through the exit trigger,the signal controlling the other vessel remained a red still under the control of ASB. I set 4 ASB triggers, one on each of the approaches and exits of the lock. The approach triggers were 30m before the ASB controlled signals. Inside the area covered by the ASB triggers were numerous signals to control the vessel's passage through the lock none of which were ASB controlled. It made no difference which vessel got there first, it was always the second which failed to be unblocked. The logs showed that the exit triggers did respond. Both ASB assets are the latest
Is my problem a bug, a limitation of ASB or incorrect setup.
MikeBr
I am trying to control the passage of vessels passing through a canal lock. I started with just a crossing with ASB triggers and controller. All worked as expected. I then added a lock and tested that a vessel would pass through succesfully in either direction, restarting after each passage. I then setup a case where both vessels arrived at the lock at about the same time. One was blocked while the other passed through. The problem is that after the first vessel passed through the exit trigger,the signal controlling the other vessel remained a red still under the control of ASB. I set 4 ASB triggers, one on each of the approaches and exits of the lock. The approach triggers were 30m before the ASB controlled signals. Inside the area covered by the ASB triggers were numerous signals to control the vessel's passage through the lock none of which were ASB controlled. It made no difference which vessel got there first, it was always the second which failed to be unblocked. The logs showed that the exit triggers did respond. Both ASB assets are the latest
Is my problem a bug, a limitation of ASB or incorrect setup.
MikeBr