rcwarner1953
Gandy Dancer
My install of Raildriver with TRS19 works except for the camera up, down, right, and left button. Also the zoom in and out rocker does not work. I am referring to the keys pictured below.
If you have not gotten this far, in getting Raildriver to work, go to http://raildriver.com/support/trs.php and also see http://online.ts2009.com/mediaWiki/index.php/Raildriver.
To get the above buttons to work, go to http://piengineering.com/PISupport/SoftwareMacroWorks.php and install the current version of Macroworks. Your Raildriver console is an X-keys device. See the tutorials at http://piengineering.com/PISupport/SoftwareMacroWorks.php, especially the one on the key stroke features.
Start Macroworks, it probably is on the task bar. What you see should look like this.
Double click the left mouse on any of the blue buttons. Example follows, you may also have to left mouse click the keystrokes tab.
Be sure to “check” the “Automatic separation of up and downstrokes box”. Press the key you wish to program, for instance, camera up key (the up arrow key). Save it.
Below is a picture of my “macro list”.
You may have to boot your PC when adding or making changes.
I had communicated with Railworks (P.I. Engineering) about them updating their website with these instructions. Nothing has changed on their site so I thought I would share what I know. I also do not know why Trainz cannot natively support the Railworks controller. At least Raildriver mostly works in TRS19 and with the addition of Macroworks all the keys/buttons work. Perhaps someone who is a You Tube star could create a video of this install. Also, it would be nice if somebody could update the Trainz/Raildriver Wiki instructions.
Good luck.
If you have not gotten this far, in getting Raildriver to work, go to http://raildriver.com/support/trs.php and also see http://online.ts2009.com/mediaWiki/index.php/Raildriver.
To get the above buttons to work, go to http://piengineering.com/PISupport/SoftwareMacroWorks.php and install the current version of Macroworks. Your Raildriver console is an X-keys device. See the tutorials at http://piengineering.com/PISupport/SoftwareMacroWorks.php, especially the one on the key stroke features.
Start Macroworks, it probably is on the task bar. What you see should look like this.
Double click the left mouse on any of the blue buttons. Example follows, you may also have to left mouse click the keystrokes tab.
Be sure to “check” the “Automatic separation of up and downstrokes box”. Press the key you wish to program, for instance, camera up key (the up arrow key). Save it.
Below is a picture of my “macro list”.
You may have to boot your PC when adding or making changes.
I had communicated with Railworks (P.I. Engineering) about them updating their website with these instructions. Nothing has changed on their site so I thought I would share what I know. I also do not know why Trainz cannot natively support the Railworks controller. At least Raildriver mostly works in TRS19 and with the addition of Macroworks all the keys/buttons work. Perhaps someone who is a You Tube star could create a video of this install. Also, it would be nice if somebody could update the Trainz/Raildriver Wiki instructions.
Good luck.