.
Page 64 of 64 FirstFirst ... 1454626364
Results 946 to 955 of 955

Thread: Snow High Valley Distr Ctr (High Resolution 950x532) Approx

  1. #946

    Lightbulb

    Good Day all'

    Anyone knows, when your Computer goes, or is going bad, it is Crunch time, saving those files, figuring out what Computer you can buy to replace the outgoing model Etc. For me, my Laptop was acting a little funny about 6 months ago with little circles popping up on my touchscreen. I didn't know why they were even there, except to say I knew by instinct it was probably a sensor issue of some sort, as on all the computers I have owned, I never seen such strange behavior out of Computer Screen! The one thing I was able to do, was poke at the bubbles with my fingers after a few pokes they would go away. Maybe for days, maybe even weeks. Fast forward to the last week, now when the bubbles popped up, and I tried to click them away, programs would open, and short of hard reset they wouldn't go away......I knew that with this exhibited type of behavior, it would belong before some more catastrophic occurred.

    An Action plan needed implementation and fast:

    Fortunately, I had already researched out a good Laptop, and for my concerns on Storage, Video strength, CPU etc, the ROG series of Computers would do the job, and in talking with Store Employees who had actually used them, I got a great range of ideas.....For me, nothing less than Tera of Storage, not more than $ gigs of Video Ram, Battery Concerns, and CPU of no less than I-7 were necessary, now the icing on the Cake, hopefully a SSD coupled with traditional Hard Drive. This one has 256 SSD. Hence I went to Costco and grabbed this Bad Boy up.

    And so far I am very pleased, the next thing was, after 5 years of running Trainz, and adding all kinds of Assets in, do I do a fresh install, or do I just do a Copy of old program.......A little thinking here, I decided on Fresh install, and on a further thought, why not buy TRS19 with all the extra Locomotives they were offering for Xmas.......I think it was 130, should I wait till 2019 a month away after doing all the change overs to new computer. OH heck no, the Trainz Bug got me, do it now, don't procrastinate.

    So I looked at my storage requirements for Trainz, and with 137 Megs left over on the Boot Drive, I knew it wasn't going to work for Trainz to be loaded there, but for giggles, installed TRS19 and after all was said and done, and with my other Software I needed to install, I had a whopping 37 Gigs left over.....Figuring out there needed to be a better way. I sourced out the TRS19 Wiki on how to move the Program Assets to the larger HD one Terabyte Drive. So had to do brand new re installation for TRS19. Took the rest of the day, now I have the usable space I need for it and all my Routes, which is quite sizable.

    TRS19 is way different as TANE was to TS12 version, so there is much to learn.......

    After driving thru a grueling Pacific Winter Storm in Northern California and Lake Tahoe Nevada at 25 degrees and almost hitting 2 cars from extreme Ice and Wind Issues, we made it to Sacramento outskirts too see some more friends.......Nice to be in a nice warm house, after thinking we might not make it off the Tahoe Lake Mountains today.

    So now I have a few mins, I dropped by to put up these pictures......Still installing New Software and getting all my Short cuts etc, put into place........

    So here are some kickstarter photos from the one Route that was already installed....Others are being downloaded from NV3 servers as I type this to you.

    Just threw together a quick Steam Consist and went on a quick Drive to learn this Route...We are leaving from downtown and Industrial Center headed up the hill on 2% incline.

    I can tell you the clarity with a NVIDIA dedicated Graphic card with almost no Frame Stutter, just slight shudder with Trees is such a welcome thing to experience........

    Doing about 30MPH as we round the mountain to points unknown.....Signaling on this Route is A perfect......Love it immensely.....

    We are off on a nearby Peak looking out over the valley as our New Passenger session goes into play here, the Power is coming up on the side and will hookup to the Coaches and make several Station Stops.

    Looks like we have some Real Estate off to a great start with Corporate Building in process.

    Coming round the Mountain, we are making a quick stop at the Lumber Mill and pick up some loads.

    Coming up to our next junction we have clear signal.

    Coming under the Bridge with Grand look of the River flowing into the Lake behind......

    Slightly out of order, but this is where we load our Coal and Water for the Passenger Train Trip.

    A view from below as we head up into the Canyons and Mountains........Full Steam ahead.

    Take a look at the scenery details and how contrasting everything looks......Great work by the Authors. And just the right amount of Trees used here for effect....

    I have never seen a headlight look like this for me, but I have seen in the Photos of other members..........Pretty cool ......

    Have much more things to discuss, but that will come after I get some much needed rest.

    That's it for today.........Thanks for coming buy.

  2. #947

    Talking On the road traveing home today

    Good Day All,

    Looks like they didn't open I-80 Hwy till later that due to white out and traffic Accidents and heavily Snow conditions.

    https://sacramento.cbslocal.com/2019...r-major-storm/

    All I can say, it was a great trip up to Lake Tahoe, very cold, down to 17 Degrees, but a week later when these Pacific Storms hit, all bets were off, as there are now 4 more Storms lined up headed our way.....But Lake Tahoe is also in Drought conditions so all this Storm business is a mixed blessing in many ways.

    As per TRS19, I messed up big time on the original installation and movement to D: Drive, instead of the smaller SSD C: Drive. So after a day and 1/2 work, I found out that I deleted some necessary files from the original installation on C: Drive. Newbie Errors with lots more experience needed here....

    Now what happens, I had to erase everything and restart over,

    And this time, I installed the basic TRS19 in C: Drive, then went thru the local file change for Assets, and it did it perfectly, I now in the process of finishing the Downloading of the rest of the Assets that come with TRS19, plus the Bonus Locomotives..

    Once all that is done, I do another Database Repair:

    Then I start slowly loading all my Old Assets and Routes, making sure nothing gets corrupted in the installation process, by making intermediate backups TRS19 Directories for restore if needed. I think as things looks it will go off without a hitch.

    Tonight I have more pictures of Maria's Pass to share below.

    Running some CN Livery tonight, here is a view of the CAB.........


    Lumber and Industrial Shunting tonight......Lots of Loads coming and going on with the new expansion Tracks, we might make some more team Tracks and Runarounds for later on......Need some time with this Route too see how it all works out.

    Bringing a load of empties for Log loads.

    This is one colorful Caboose for sure.........I know it is a bit out there, but I like it,,,,,,Might Clone and fool with the color brightness when I get some down time........

    A hot Santa Fe Passenger service today, and they are a cool set of Dome cars to take up into the high Mountain areas here.......Nice upper floor view out of the center, I have rode cars similar to these a many time, and they are always favorites with the Passengers. Forgot to mention, I extended all the Crossovers by Double throughout the whole Route......Espicially for this length of Cars.......You can run them on short Crossovers, but speed and looks don't look right to me as they do with longer wiggle room I have provided now.

    A solo power and caboose head out to pick up some empties today.

    And here is my Warbonnet F-7? I think, if I am wrong please excuse.......They are hot on the Throttle to get thru the high mountain passes today.

    Log empties are hear now, and on other Tracks we have covered Hoppers on the move......

    Our solo gets a Lunar clear here, that's perfect as we get ready to go thru the Yards ahead.....Lots of work for us, and that is a good thing.

    Columbia Falls bids a so long, we have our new load of Passengers.......Everything is coming together today....It's a good day on Maria's Pass.........

    I have some more info on TRS19 installation results........

    I don't have a very good WiFi connection, so I better sign off,,,,,,,,Talk too you all soon,

    Have a great day as I am on the Road early tomorrow morning........


  3. #948

    Lightbulb TRS19 and PEV Soft installed/ Kick Starter Steam Pictures

    Good evening all,

    Been busy trying to get Trainz TRS19 and PEVSoft setup and working the way and Location I need them to work from. So after a grueling day and half and help from PEV,PCAS,JCITRON, and other members. Thank you for the assistance..

    TRS19 and PEVSoft is now running from Drive and playing nicely together as I integrate the Repair process for Faulty Assets......Do have to say one thing, this computer is pretty darn fast, You can tell the PEV Utility runs twice as fast on my ROG as it did on a 5 year old HP Envy.....As to be expected for now........


    TRS19 is a much different program than any of the other Trainz versions I remember. I like the layout graphically speaking, and it will take some time for me to get used to the layout and Design.

    From what I can see, it is more graphically driven than the other older Versions, For me as a Visual Driven individual, learning wise, it works. I can relate more to a Picture than Text, if that makes sense.


    Now it looks like I have all the Modules installed that came with this XMAS Special Package. Pretty Cool all the Routes and lots of Locomotives from a plethora of Road Names........

    With that said, I wanted to play it safe with TRS19 and do the Base install first, to make sure there were not any hiccups, so far not.....

    Now comes the real work, put in all my old Assets, Weeding the ones out that will not be Viable, That could be, Well I'm not sure,it could be a few 1000 or more.?.......Take some time, need to work a little on it every day.

    I like my new ASUS ROG Laptop a lot and finally have a dedicated NVIDIA GPU, 4 Megs Graphic Ram onboard is a pure Dream come true..........

    The only thing, that hurts a bit for now, and I plan to address it ASAP is to change out the second Hard Drive, {D} for either a faster 7200 RPM or use my old Samsung SSD, out of my HP Laptop

    What I don't know is whether or not this ROG supports a 2nd SSD.,It will reveal when I open the access door next week to find out.......I'm hoping it does, but if not, will go with a Plan "B" with traditional 7200 HD, and if it does go that way, Ill probably go with 2-4 Terabyte Capacity.

    Several Computer Specialists over the years always told me, if your going to by a Hard Drive, don't try and figure what capacity you'll need,instead buy the largest you can get, and you'll most likely come out ahead. Another reason, Hard Drives Storage is the cheapest it has ever been, especially with the advent of SSD coming on scene, I recall when there only 128 Gig or smaller? And they where over 500$ back then.....Now the price has come down within realistic purchase price for you and me......

    Enough Computer talk, lets see some Trainz Pictures from Kick starter Route......:

    Wanted to show the nice looking Icons that come with PEV'x tools......Very well done.......

    Steam is on the way here to pick up Coaches and head on out to the Mountains above this area......Nice weather and the customers are very anxious to get going.

    Coming out here from Fueling as we transfer over to the far track where our Consist is waiting for Locomotive.

    A view from afar here as we see the whole valley........Our Train is set to leave now........

    This is where we switch over to the Coaches about for Tracks away, Switch tenders have lined us up,,,,,,,

    One thing I don't like is people standing on live Tracks, someone is going to hear about this, it is not safe, it only takes a quick moment to have a terrible accident by Train, if we hit someone....This practice stops today...........They can yell and scream at me, but I'm am responsible for everybody who is on our property here.......

    Good head of Steam as we ascend a 2% or better grade here...........

    We are threading our way out of the Yard Tracks.......Signals are permissive...Nothing coming in for now........

    Interesting looking Factory here, that Smoke Exhaust is quote high........Wonder what they make there........Could be a small Steel Plant or refinery of some sort.....Hmm.

    Ladies watch as their Family members leave with the Train now.........

    I think that will do for today.........See you soon.........

  4. #949

    Lightbulb TRS19 and PEVSoft update/ Marias Pass Pictures

    Good Day all,

    Got some more needed rain, and in fact lots days include Rain Events and that is great,, Since last year was a parched 5 inches and down 9 inches for Yearly average.....Lets hope this year fairs a little better for us.

    https://www.latimes.com/local/lanow/...110-story.html

    Now for the latest news on Transfer and Setup for TRS19 and PEVSoft.

    I got all my old Stuff Loaded in TRS19, now it comes to fixing, and deleting what is unfixable for TRS19 standards, which I can live with. In the course of checking my updated inventory, I found out, I had all the Routes I had downloaded originally in TANe theatre, but non of the Revision changes, so we had to go back, fire up the old HP and do a total list of my Route Assets by my name, and backup to CDP, about 1.9 Gigs worth, trans to USB, install on the ROG, and now all is well,

    I have the Original Routes for reference, and all my Changes Revisons, about 3-4 each per the Routes I changed, merged Etc........

    I don't know if I mentioned or not I also picked up a Portable Seagate 5 GIG Drive, which will serve as intermediate backup along with Daily Carbonite, where I can get my backup files if needed, 24 hrs a day, but download is slow for the program I selected.

    With the 5GIG unit, I have it right here, and it is very fast with USB 3 speed this ROG supports, or if not it is backward compatible to probably USB 1, I hope not, that is way slow.......LOL

    I'm taking the opportunity to learn ASSET-X better now, as I have a ton of Faulty Assets..

    Today for example, I learned the basics of how to do Batch Mode for Asset Repairs (multiple Assets) and intend to try and learn some of the basic Scripting language to make some files in ASSET-X, And ASSET_X comes with quite a few AXM files to play with.......Check your Asset-X directories, I think you be surprised at how many individual Files there are installed with the Package........

    The other thing I plan,is too read as I can, all TRS19 and ASSET-X FAQ and dedicated Threads so I can get up to speed with this new program.

    Granted, It will take some time, a good amount I'm sure as I learn everything I can about the 2 programs, the benefit for me, is I have been using ASSET -X since TS-12, but in limited fashion, now with the Advance TRS19 Platform, I feel I need to step up my game if I'm ever to get my all my Assets updated, repaired or discarded..........It's fair to certain there a lot of you in the same situation if you have been thru several revisions of Trainz over the years........We all have a sorted mess of Versions back to 1.0, if not your ahead of the game.....Since 3.5 and above is a healthier place to be sometimes with Trainz.

    One other thing I need to add, when I peeked in on Timber Ridge Line, I found lots of Textures missing, and other items, while that is not good, and is to be expected, there was a lot of new Faulty Items showing up too, I am hoping that when I repair these items where possible, that situation will improve itself....Over time of course...I'm aware of some new PBR Textures from MSGsapper and other Creators as we began switching to a brand new Platform in Trainz, like anything else, time will tell, but from what I see of the New PBR Projects, and the way Graphics work in TRS19, things visually are much more appealing to the eye.........

    But I want to see how I can fix what I have first.

    Tonight will revisit Maria's Pass and see what's going on?

    In our recent photos, we had lots of Freight and Passenger stuff going on in the lower half of the Route, now we rejoin our ATSF Passenger Train here as it gets ready to hit up the Famous Maria's Pass Grade ahead. Weather is cool and quite chilly as to be expected this time of year.....Which reminds me, I need to go in to this Route and Lower the Snow Level, to see how things look here.

    She flew by us at 75 MPH, all we see now is bright Red Light......I should put on a FRED Device too see how it looks on the Dome Car.

    Local Traffic is happy they didn't have to wait for a long slow Freight............Ha Ha, we have them coming too today.......

    Heading up the Grade now.........Everything is clear ahead for us......

    Going into Coram West Station and small Freight Yard area.

    We have lots of Warehouses near our tracks, and the Rail Business to keep them going..........

    Passengers have de trained for here, and the rest with some new Boarding's completed, we rev up our ATSF Warbonnet, as we plan to dance up the hill........

    And here we head into the Canyons now, it's getting even colder,, as our elevation increases, about 40 degrees here.....No Snow in sight for now......But the Chill is in the Wind, and we have nice hot Coffee or Coco onboard etc,,,,,,,

    Hitting a double Crossover here.........We have lots of these strategically placed thru out the Route, that way if we find a slow Freight ahead, stalled, whatever, our dispatchers will shift us to run around the problem and keep our speed consistent......That's great management......We have the necessary Puzzle Tools, and use them judiciously when the need arises. Be prepared for all contingency's, be proactive, and only reactive when you can't do it another way.......

    Coram Station is clear as we take our new passengers and head on up the Grade....1.5% if memory serves correct here.......

    Will check later too see how this Consist is doing.......

    Thank you for coming by.......Have a Blessed Sunday Friends........

  5. #950

    Lightbulb

    Good Monday Morning all,


    Just thinking about today's Date, has been already 2 weeks since New Years, and 3 since Xmas, wow has time flown around here? Alright, so let's give a Shout out to Ish6, he just survived a serious Intestinal surgery, and is on the mend. We ask for his continued recovery.

    https://forums.auran.com/trainz/show...10#post1729110

    and too Dean AKA "Dinorius_Redundicus's Avatar" a terrific Asset Creator and master of many other processes in the Trainz world, thanks for help with Asset-X issues I had..........

    https://forums.auran.com/trainz/show...07#post1729107

    Our Forum and Members are a wealth of vital information.....Take care of and respect them They fill the GAP where others cannot.........

    Alright, so latest update with TRS19, it is improving for me, as I strive to learn how this Platform works over the older Trainz Versions I have played with........

    Love my new ROG Strix ASUS Laptop too......

    After getting TRS19 correctly set on Drive D: with it's natural Directory pointing from C: Drive,and here is Path Command, showing the proper location and how it needs to looks......

    C:\Users\your name here\AppData\Local

    holding about 217 Megs of relevant Files and Folders to coexist on D:,

    and shown here,


    "D:\Trainz Railroad Simulator 2019"

    I just allowed it to name this way and you can put it on any Drive of your choice, I recommend using a fresh install always. You get the base TRS19 install done, Check it out before you download the additional Assets, depending on the package you bought, I got the Xmas/New Years special with 130 Additional Locomotives etc, which come in 2 separate Downloads from NV3 servers.....And it takes several hours, probably close to a Day for the Downloads to complete.......I did it overnight after I saw how long the first package came.

    On you initial installation, open the program up, check out the few Routes in it, run some trains, etc. Close the Program, immediately due a Database Rebuild, and this is too see the Program works, and it is set in the Drives you want it to be......Follow the instructions for moving your local asset Directory to the Drive of your Choice, remember you have to leave the Directory Structure intact on C: Drive, That was one of my mistakes, I took out all of the Directory with exception of the Pointer Config File, and ran into problems right away, TRS19 did not like it, all kinds of errors, resulting in deletion by me, and brand new install, and do it all over again, what I'm saying, try to do it right the first time, and double check your changes as you go.........

    Initial setup gave me something 464K of Assets, now I have 487K with the Downloads and my Old Assets added, which I am still working on. D: Drive is a One Terabyte, or 1000 Megs, I am currently using about 311 Megs give or take for now,,,,,,getting near about 1/3 Terabyte (350 Megs)....

    SPECIAL NOTE ON DRIVES in my ROG:

    Drive C: is an M2 SSD class of drive, unfortunately only 256 GIG, which is way too small for all my Trainz stuff,

    Drive D: is conventional Drive 1 Tera, and probably 4200 RPM or maybe 5400, I'm not sure at this point, my intention is to bring in the Samsung SSD out of my OLD HP Envy and do a Swap, that is, if this ROG supports that SSD 1st generation of SSD, where as M2 is faster and newer.....Won't know till I open the maintenance cover on this ROG, very easy to do, one Screw......KUDOS to the ASUS Engineers......Doing the Job Right for DYI folks,,,,,,(DO IT YOURSELF acronym speak)

    And when I got it completely installed with my junk, There was at least 4500 Faulty and or Missing Assets, This is normal, I have old Assets from Ver 1.0 on up to Ver 4.5,, do I need to clean all the junk in my Trunk, Oh hell ya I do.....and that is what I'm working on, 2-4 hours of every day I can.....Will it take time, you bet your Skippy...!

    Now there is some sunshine, unfortunately like everyone else, When you download Routes, or Assets, they come with missing Assets.....And when you install them, they can't always find all the missing Assets, because a portion are stored on other Vendor or Private Party Sites.....You have to Detective your way thru the missing Asset List and try to find what it is that is missing.........Never a 100% return as others know.....

    So, as I process this mountain of missing and Faulty, with the help of Asset-X, I am down to 1650 Assets Faulty and or Missing, whittling away in patience.........And where necessary, with an ASSET that is too mucked up for Trainz, generally Mesh, or missing parts of the Asset dependency's I hit the delete key for my Sanity........LOL

    Ah,,,,,,,Just did about my 8th Database Rebuild, which is done after putting in 2000-3000 missing Assets in yesterday, and correcting their Asset Faulty conditions......Took 14142 Seconds to rebuild, divide by 60 and you'll get the minutes it took......Down from a high of 40000 Seconds at the worst time needed for Rebuild, most likely with 4500 Faulty/Missing Assets......What a Hoot that was.!

    Alright and another key thing here, I was able to do Revert to Original on probably 1000 or more old Assets, and they are Faulty Free,,,,Now how they look in TRS19 versus other items, that is another Sand Pile I'll need to play in, once I get the first phase cleaned up here........

    I'm trying to do this in a logical way that works for me, and preserves lots of Assets, that I know will never get updated, and I like.......

    So bottom line, take the time to do the job the best you can, clean up your Assets, and throw away the ones you can't that's just a fact of life here, and move on........

    Learn all you can about TRS19 and Asset-X which I think is a grand program for fixing/changing Assets to your liking, Bear in mind, I am in no way an Asset Creator, just not my foray, nor do I have the time........But I do massage Routes to my Liking, do lots of Merges and have a great time in Trainz, It is the best program I have ever come across, recall, I originally came from the STEAM program game......I never went back after finding out about Trainz Driver 2 on IPAD.......So there you have it folks!

    Questions and Comments are always welcome.......Thanks for dropping in, I'll post some pictures later on, I'm on a roll with getting these Assets fixed and found as the case may be.....

    And, oh yah, it is raining great outside now,,,,,,,,,,What more could I ask for............PEACE my Friends.........Stay Tuned.........

  6. #951

    Lightbulb Good news ont the Cleanup progress Etc.......

    Good Day all,

    Things with TRS19 and PEVSoft Tools are definately looking up this week.!!!!!

    After about 2 weeks of fooling around, trying to learn enough of both Platforms, I'm now having some really good success with clearing up my mess of Faulty/Missing Assets.

    Originally I had close to 4500 items to Delete, Fix or Repair, Locate, Download Etc with the new installation of both Programs on this ASUS ROG Laptop, with Database Rebuild high of 40000 Seconds now down to 5000 Secs which I think is very respectable, when you consider the thoroughness of ERROR CHECKING Trainz is pushing too make sure no Asset is left unchecked in the mix.

    I did however notice that when there's significant Faulty or missing Assets, Trainz gets very cranky, and slows way down as noted by a couple of Members Threads,


    Trainz tries to find out what is going on with the Faulty ones, So one of the things I do when I cause a Database Rebuild,is save the Log Results, and poor over it with a fine tooth comb too see what went wrong and correct where possible.....

    For example, I never get the Precache Downloads, ever!!!! And there are a number of other members who have complained about this error too....Why?? Who knows, but there is a problem with that, in that it cause the Rebuild Time lost to check and it has never cleared up, because I did the basic install, and the first Scam out the gate with new install had it shown.

    The other item, is Trainz tells me I have Auran "Water Commodity in 2-3 places, and shows it as an error........
    ================================================== ================================================== =============
    ; <kuid:-3:10044> <kuid:-3:10044>
    - <kuid:-3:10044> <kuid:-3:10044> is present in multiple locations.
    ; <kuid:-3:10044> <kuid:-3:10044> is at arc:fld:$(packages)/sc489p/content||kuid -3 10044.tzarc|kuid -3 10044
    ; <kuid:-3:10044> <kuid:-3:10044> is at fld:$(builtin)/base/content/kuid -3 10044|
    ; <kuid:-3:10044> Ignoring asset <kuid:-3:10044> from package: arc:fld:$(packages)/sc489p/content||kuid -3 10044.tzarc|
    ; <kuid:-3:10004> <kuid:-3:10004>
    - <kuid:-3:10004> <kuid:-3:10004> is present in multiple locations.
    ; <kuid:-3:10004> <kuid:-3:10004> is at arc:fld:$(packages)/sc489p/content||kuid -3 10004.tzarc|kuid -3 10004
    ; <kuid:-3:10004> <kuid:-3:10004> is at fld:$(builtin)/base/content/kuid -3 10004|
    ; <kuid:-3:10004> Ignoring asset <kuid:-3:10004> from package: arc:fld:$(packages)/sc489p/content||kuid -3 10004.tzarc|
    ; <kuid2:82412:612622:1> <kuid2:82412:612622:1>

    Now for Faulty and Missing items, Originally 4500 as of today, I have it down to 1100 Items, What a Job, I had to throw away probably 1500 or more Assets, the good side is quite lot of Faulty that was able to use the REVERT to Original command and it worked perfectly...........

    All in all, that nasty word called experience is "the best teacher" proved itself beyond the shadow of doubt, being tenacious and accurate works.....You just have to be patient, logically, and be willing to change in the middle of the stream if need be. And I'm very greatful to the many forum members that gave great advice on how to deal with the Obstacles I faced TRS19.........

    With that said, I am so happy I went to TRS19, and was able to get my new ASUS ROG, it is working out great........

    I found this article today about a Molasses Incident in the early 1900's...I think you'll find what happened both before and the fall out afterwards, depending on how you look at it, most interesting.......


    https://www.nbcnews.com/news/us-news...illion-n958326

    I have some meetings early this AM, so I will post some pics later on today..........

    We have a nice Pacific Storm coming in tonight,..........The last of the storms for the Month, and this is perfect......We are getting some very much needed water.......

    Take care all.........
    Last edited by blueodessey; January 16th, 2019 at 10:56 AM. Reason: Spelling Errors

  7. #952

    Lightbulb Baltimore to Connellsville & West Rte

    Finally got a chance to get the Pics in here, and another huge milestone for me, I downloaded this Route below, it is the largest Route I have played in.....Take a look at what the Specs are on this one.......

    It is close to one Gigabyte in size, I was actually able to run on it, with very miner almost no Frame Stutter, and the pictures are great..........This is something I have always wanted to do......

    Now I have to be honest with you all, I did remove about 20% of the Trees to help free up some Ram both System and VRAM.......And I did it in a Bulk Asset and Replace operation, all the Route in one shot, per Tree, with about 5 different Trees,,doing one at a time, took about 10 mins max, probably less, the TRS19 didn't crash, my computer didn't lockup or act funny in any way, shape or form.......It was dead on operation!!!!!!!

    I saved the files about once 1/2 way thru the op, then again after the 5 tree......Take that to the Bank.

    Just sitting back here with like a CAT with a Cheshire Smile a mile long..........AWSOMMMMMMMMMMMMMMMMMEEEEEEEEEEEEEEE EEEEEEEEEE......Can you tell I'm happy..........

    The Baltimore & West Mega Route is a result of the merging of the WM & B&O Mega Route with the Baltimore to Cumberland Mega Route. The route includes the original Cumberland to Connellsville, and the Western Maryland Thomas Sub which were merged to form the WM & B&O Mega Route, and the Cumberland to Harper's Ferry, and Harper's Ferry to Baltimore routes which were merged to form the Baltimore to Cumberland Mega Route. Total main line trackage: 1107 Miles. The route has 11,605 baseboards, and covers 2,322 square miles. All content is DLS only. By opening the route in 'Content Manager/Show in Explorer', you can access and download 2 Trainz Map JPEGs of the route

    I thought I would show those of you what the opening screen of TRS19 looks like here,,,,,,I really like the picture with the Snow Covered Mountains in the back...........The program is well laid out, and is from what I see, done with heavy emphasis of GUI rather than Text, and it works well for me..............As I learn more and more about TRS19 and the way it handles things, I am Sold on it......Does it have some issues here and there, yes it does as I read the forum,,,,,,And that is too be expected for a newly designed platform.........What I do say, it works for me, and my ASUS ROG Laptop............Steady as she goes there Captain, and continue learning......The rest should come in time.....And bless it be the ASSET-X Utility......I fixed around 800 Faulty or Missing Assets yesterday, am I little crazy and OCD with fixing 4500 Asset issues, yes you could say that, now that I am down to 1100, I think 50-100 a day, till I get it cleared will do now....It's time to play...........All work and no play, makes Blue a dull player.......Lets have some fun now, with the new Routes etc........I'm definitely looking forward to it........

    Here is the Map of this gigantic Route and Kudos to jrfolco and his work.......Excellent in every way imaginable......

    Put up a quick C&O Steam with Freight and Caboose of course. Take a run thru the Coal yards here, have no idea where I am going, as I am not familiar with this Route at all.....Green as they come......

    Love the Ships he has here and the Dock layout.........

    We had to go thru 2 yards after the Dock area, but because the 2nd yard was lined up for us, we slipped thru the bypass Main, very few switches.....Well done Sir.......

    We just came right thru the middle here where we run into a 3 yard main.........

    Lake Water here with nice Sun reflection............

    View of the Transload Shipping area with Ocean View to the left.........A steady bright light, lets folks know we are in the neighborhood.....

    Quick side view as we pass thru at 5MPH, lots of switches here and I don't want to put any cars on the Ground, slower is better till I learn the lay of the Land.......Beautiful Engine........And it is strong too.....I have plenty of weight on this consist........

    We are coming in on the bottom right curve here......Look at all the Buildings here, how neat and straight the Streets and other buildings are......So well laid out........

    Now I have about 1107 miles of Route to travel, that's right 1107 I didn't stutter, and or 2322 Square miles, tell me that is one heck of size Route.........Is there anything wrong with it,,,,,Nope, but that is not a true qualified answer until I get one heck of lot more miles in.............Am I going to change some things, yes, definitely have some ideas.......But nothing major in that sense of the word.....Just customize a few things for my personal likes.......

    So the Rule of the day on this one, if your computer, storage and VRAM is strong enough, grab this bad boy Route and play with it..........I think it would be well worth your time..........

    Again, outstanding Route......What a huge SAND BOX to play in......Thank you jrfolco for Job Well Done Here...........YOU have my complete respect on this one......Thank you Sir...........
    Last edited by blueodessey; January 17th, 2019 at 03:21 PM. Reason: Spelling errors

  8. #953

    Lightbulb Settings for GTX 1050Ti request ? / Andrushivka-Vinnitsa UZ wonderful Route

    Good Day all,

    Been working on the last 1000 Faulty and/or Missing Assets etc, now down to about 680, and so far so good......And when I took a break to play, I looked over the Routes on DSL for versions 4.5-4.6, figuring that with TRS19 it is more realistic to play with the Routes more in tune version wise with TRS19. Along with that, I plan on doing some spring cleaning of the older ones I have. With just keeping the ones, mostly the Mega Merges I made that I want hold onto to..........

    I have to share the biggest part of my happiness, is with a Computer that can handle the Graphics and make things look even more realistic than I have ever seen..........IT is awesome.......One thing I do need to find out from you folks with NVIDIA GTX 1050 Ti Graphics Card is what you feel are the proper settings to use in TRS19 Theater.???

    Last might I played on this Route from olegkhim, it is fairly large with wonderful landscaping and many opportunities. Tonight I posted pictures from this Grand Route............Check it out.......Below are the

    Andrushivka-Vinnitsa UZ

    East European railway. The route runs along the vast expanses of the Ukraine among the picturesque fields, forests and villages. A large map which is busy with many passenger and freight trains. There are short stretches of track between local stations and long runs for high-speed passenger trains. There are small parts of the map which are not electrified and need to use diesel locomotive traction and two separate stations where the locomotives can be changed. The total route length is 180 km....

    In disclosure, I don't know anything about this Route, but from first impressions, it is Grand, I just need to learn about.

    I found out, that when I transferred my Routes, I forgot to CDP my Trainz Consists that I made......Thank goodness, I can go back to T:ANE on old Laptop, and put a backup copy together to import into TRS19, I was so busy doing Asset Repairs and Route imports etc, I failed to notice, I didn't have my old Train Consists I had made over several years........

    Now with that out of the way, I threw together a quick Diesel and freight together as expeditionary train to parts yet unknown....

    Now not all the Route is Electric, so felt it was safer to bring a Diesel than Electric, less I get stuck somewhere with no electricity.

    As you can already see this Route has been masterfully designed from olegkhim, and I like it a lot already...........We are starting at one end of the route and travel thru the Countryside.


    We are doing ok,, loks like some Yellow and Reds are ahead, probably need to set some Switches ahead.

    We stopped at the Dispatch Office to check in with Dispatcher here as he has his morning Smoke........Will get some updated paperwork here.

    We got our clearance for this part as we forge ahead......I have to learn where all the Industries are and what they do.....

    Aproaching another Yellow and Red after, we head into a Railyard ahead.

    Tall apartments loom in the back......As we pass thru tranquil part of the city.

    We stopped at the Crossing here and found out the switches will take some time to set, and it looks like Traffic is backing up as we hear a Chorus of Car Horns express their displeasure with Train delays.....

    So we made a command decision, reverse move back a 1/4 mile and allow the gates to raise, clear the train movement........Looking a mile ahead, there is huge yard ahead.........And combined Passenger Train Platforms on both sides, with a Center set track for Freight passage, which doesn't affect the Passenger Loading....Well done Olegkhim, I like the design principles.......

    Made it thru the Rail Yard and we forge ahead, in the distance it looks like some kind of Factory or Power Station, which brings up a point, I need to see how the Electrical and Sewer Systems are setup up on this Route, whether I need to add to the infrastructure....Route is plenty big and there is room for additional Industries in key locations.

    Beautiful Trees and Shrubbery, Olegkhim has done a wonderful job here...........It is no overgrown either.........He has a good balance of Trees to open areas.....

    Here is an overhead of one of the Crossings, I really like how it is designed with protection for Pedestrians and Traffic with respect to Train movement.

    This will do for now, I have about another 680 Assets to weed thru and fix or delete as necessary......

    I bid you all a good day, and thanks for dropping in.............

  9. #954

    Lightbulb Progress Notes with old assets /Ardennes and the country 'Hesbaye' in Belgium Route

    Good Day All,

    Things are going well, on the install, fix and Delete Assets project, the larger issue I face, is cleaning up all the missing Assets with all my Old Routes, and new ones Too. That has entailed a lot more work, but I have made up my mind, I want to avail all of this issues with a Clean Slate, so maybe a week or too more to get it all tidy'd up, akin to something better known as real good Spring Cleaning, even though technically Winter for a while.......

    The Bright Side, with more fixing and learning to do more on the problem Assets, it forces me to learn different creative ways of resolving the Faulty Issues.....And I find ASSET-X a terrific Utility is this mode of recovery....I do know I haven't scraped the surface with ASSET-X, and there is so much more to it's capabilities....

    One thing I really want to learn to do, is try where possible within the limits of the original Mesh Design, is to upgrade over version 3.5 so I don't get so many of those Trainz Warnings, I know that is major trigger point is the Versioning of One's Asset's.......So this will be another Tasks I plan on learning........I have done some 2004, 2006, Versions to TS-9 and TS-12, but I don't understand everything on the Conversion that ASSET-X does, which means, I need to go back and reread the Manual that came with it...........Just takes some time and tenacity.........

    Over to TRS19 Graphic's settings, big shutout to MSGSapper for his excellent help on what I needed to get the most of my New NVIDIA GTX 1050 Ti video card, I made 2 quick changes on my settings, and found out, I cannot make the Anti aliasing to 8x it makes the Textures go wonky, and that is ok, I dialed back a notch, and will also check my Draw Setting too see where it works the best......Other than that I am a very happy camper with my new Laptop and the NVidia, it kicks some real @#$%^ you knw what I mean here........

    And check out MSGSappers Custom made Rig, it is off the charts,,,,,,,,,,,Awesomeeeeeeeeeeeeeeeee!!!!!

    https://forums.auran.com/trainz/show...19-you-can-use

    By all means, check out his Thread, there is excellent info here for all to see........

    Recall I alluded to the fact I missed my all my Train sets I created and forgot to bring over to the TRS19 installation, I an I wrongly assumed I only had 30-40 Train-sets, well, that is what happens when you Assume rather use empirical source....To my amazement, I had 144 of those little fellas.............And on top of that, I had multitudes of missing Rolling Stock.......So you know what I needed to due, open each one showing MISSING ASSETS and hope I could find them, so far so good, with the exception of a dozen or so, having some I could find, so I had to clean the Config.txt to clean it up...........Now that they are installed, I don't have to go back and re invent all the days of work, that went into making these Consists for the specific Routes they were cobbled together for...........I like it when thinks work out..........Hurray.........!!!!

    Tonight will see some pictures from the latest Route I have downloaded recently, I't interesting, but since it is brand new to me, I cannot say more at the moment......Looks like this one is in it's 15th Revision which a see as sign that lots of hard work went into the initial creation to where it is now........

    "Ardennes and the country 'Hesbaye' in Belgium"
    ---------------------------------------------------------
    Notes on the Route from Creator Author (GuilliamsYves Kuid:181290:100269:15):This layout is imagine the Ardennes and the country 'Hesbaye' in Belgium.

    The track design and the layout are based on the use of main track-paths in the execution of the defined business-plans. The workplaces, the industries and the yards are accessed trough the use of portals and are delimited with shunt track-marks.

    The stations, workplaces and industries are supplied with a turntable access supporting steam engines.

    Turntable activity is monitored by the use of an HTML-asset.

    The navigation commands to the different stations, workplaces, yard-portals, industry-portals must be done with the command 'Drive to ?' to obtain the best performance.
    Perform shunting operations in stations with the command 'Navigate to ?' and in workplaces , industries and yards with the command 'Drive to ...'.

    Bring your train across the Belgium Ardennes and the country 'Hesbaye' or work on a busy yard to have the economic cycle running. Deliver goods to the various customers and industries.

    All will run automatically as long as there are no more than two consists which are accessing simultaneous the same industry.

    Have Fun !
    ----------------------------------------------------------------------------------------
    Here is the Map of this Route. At first glance, it is compact, and has nice Water Ways etc.......Not to large, but large enough to have plenty of fun driving your Trains.....

    Grabbed a European Freight and we are headed into the Port area too drop off some Stacks and other types of Cars.......

    Driving thru the Countryside, the Author has done an excellent job with Grass, Trees etc......Blended perfectly and not over done.........From what I see as i drive the Route, this is exactly what you would expect to see if your going thru the countryside here.....Well Done sir........

    Great open areas are viewed here on the right, and perfect Cityscape awaits on the left........Lots of River Ways with gentle Roads and Bridge connections..........I like it!

    A lone ship has come into Port, and I will add some more sparingly in the Ocean area........Nice color coordination here too.......Again, the Author is very talented and when you go thru the different areas, it feels quite realistic.

    Little bit of Tree encroachment, and this is well expected as we do reverse move here to different parts of the Route.

    Shoving the Freight in here for Delivery, we come across a Crossing here,, Cars waiting, signals working in advance of our train.....

    Now I have much more exploring to do on this Route when I get a chance, if you like the pictures, then and this Route looks inviting, then by all means, go snatch it up off the DSL.......I think it would be well worth your time......

    That'll due for tonight, and thanks for coming by.............I bid you all a great week ahead.....

    And one last thing, there is Lunar Eclipse Tonight coming very soon,,,,,,,Check it out..........

    Night now.....

  10. Lightbulb Assets in repair and some Marias Pass screenshots......

    Good Evening all,

    Been so busy doing honey dues, you know, that first of the year items, that didn't make the list last year, lets say towards the end of November, Yup, way back then........Heaven help me, and now it's time to do those Taxes again = fun times and Brain strain........

    Before I lay out what I hve done, here is a link that reviews a 15" model of my new Laptop similiar to mine, I have 17" model, and having more screen real estate, even thought it's heavier, this is the way o go......

    https://www.ign.com/articles/2018/10...otebook-review

    I have been systematically wading my way thru another round of Faulty and Missing Assets, And it is getting easier as I go along, repitative practice makes for more perfection......And a little switchy,changy magic when and where I can.......

    One of thing things that really pops up about 15% of the time is Screenshot Images size 512x512, it must have to do with the Authors Graphics Programs, as far as I always knew it had to be 180x240? But there must be something I'm not clear on...

    Good thing here, I can go into Paint.Com, Windows old but very basic Paint program, and do a quick edit on resize and save over the higher image file, in fact, that is the only error in the Asset, so it's a fairly easy fix to push out........I think I have down probably 100-125 or so.......

    Now I am very ashamed here, but I found out, when it's late at night, your Brain starts following asleep, with the eyes, meaning I messed up about 10X and saved some Routes and Sessions to the wrong name file, and over wrote some good Routes and Files, the only reason I know why, I opened up a couple, and Config had one name, and contents inside, well, you knew right away, it had been saved over the wrong file......

    Now I got those corrected, some I had to throw out, and I'll need to redownload the original Routes off the DSL........All I can do is laugh about it, grace saving thing, I had extra copies of the original work......I always allow 3-4 anyway just in case something happens........Lest I say, TOO ERROR IS TO BE HUMAN, Guilty of both here........

    Bear in mind, I'm cleaning up 4.3 yrs of work here........So I downloaded some more Routes I ran across .
    One was "MRR Gairloch Southern NG RR" Small Compact NG.........

    "Australian Rural" About a 10 tile or more Country Side, very Rural Route, which I plan on using as a Merge with some other Australian Routes I have in Merge Fashion,,,,,,,Speaking of which, that is one other thing I need to check out with TRS19, and this new laptop, is see how the Merge Function works, I have no clue, since I so busy with Assets Cleaning.........


    And I was thinking about one of Routes in the past I downloaded about 2 yrs ago, I believe it was called Montana Rail Link, seems to me, I had to cut the Route down about 25% on each end of the Strips, So I ended up with about 50% smaller Route to make it work and not crash my HP Envy, now I think I will redownload it, in it's entirety too see how it functions in TRS19 Theatre......Will see what happens....


    I 'm trying to remember if it was originally 300 miles long, or 100 and something....Well will find that out later tonight, I'm doing another Database Build now too order up the 240 Assets I cleaned up,over the last 2 days........It's only a number that gets smaller over time..........

    As I do more working within TRS19, it is starting to make more sense how it works now, and I really like how when you see the pre images of the Routes, you know right away, if has missing or Faulty assets by the little images canted to side of the image.......

    I have my NVidia settings about right now, and nothing above 6x Aliasing........

    That's enough Rag Chewing here, lets see what we have for Pictures tonight......?

    I think will do some Maria.s Pass here............

    Got a power move in the wings, set of for BNSF SD's headed up north to move some Coal Loads for us......

    Little Junk Train moving through the mountain......... Nice spring day, Snow Melt gives us sparkling brooks coming down the steep mountain crevices as we pass by........

    Looks like a Spring Shower may be in the offing today......

    And as night approaches the back of Dome car hear as it heads into the Canyons.........

    Had some heavy Mountain Pass winds here the other day, nice to see our Communication Micro Wave Tower is in place........Means a lot for our Train to Train, and Train to Dispatcher Radio Links......

    A look from high above observation spot on the mountain, we see a ATSF WAR Bonnet heading thru some very dark canyons......Guided by a brilliant beam of light........

    And now it's pitch black as we come into Stanton Creek and head for another Station Stop.........

    Morning is not far away as we pass a southbound Passenger Train.......

    A round the mountain we go as head to the next town,,,,Signals and district look good for now, but some moderated Rainfall is headed our way......The good news here, our tracks are well maintained......So weather should be a nn event as we head North......

    That'll do for today.........Night Now

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •