iPortals and CMTM

I do have one question, do I need a thru record for every car type that I might be expecting per portal, or just the two?
 
Ok, new issue.

Jib228_20150824_0001_zpse1hdyean.jpg


Several cars will get records. But many of the thru records dont get added and the switch list says "no data." And then many cars that should get local records dont.

Now it says something about adjustqueue. I was thinking that has to do with a product. But all my records state that cars that are loaded are loaded with what ever. So maybe that's the issue.
 
Here are my iPortal records, duplicates removed to save text:

cmtm105 "1234567,PortaliSouth,XFA,x,x,Detroit MI,empty,x,x,x,x,x,x"
cmtm106 "1234567,PortaliSouth,XFA,x,x,Detroit MI,empty,x,x,x,x,x,x"
cmtm107 "1234567,PortaliSouth,XFA,x,x,Wixom Ramp 1,empty,x,8,Toledo OH,load,Products-Car-01,1,x,x,x,x"
cmtm119 "1234567,PortaliSouth,XFA,x,x,Wixom Ramp 3,empty,x,8,Toledo OH,load,Products-Car-01,1,x,x,x,x"
cmtm125 "1234567,PortaliSouth,XFA,x,x,Wixom Ramp 4,empty,x,8,Toledo OH,load,Products-Car-01,1,x,x,x,x"
cmtm131 "1234567,PortaliSouth,XFA,x,x,Wixom Ramp 5,empty,x,8,Toledo OH,load,Products-Car-01,1,x,x,x,x"
cmtm137 "1234567,PortaliSouth,XFA,x,x,Wixom Ramp 6,empty,x,8,Toledo OH,load,Products-Car-01,1,x,x,x,x"
cmtm143 "x2x4xxx,PortaliSouth,XBG,x,x,Rite Aide,load,x,24,Toledo OH,empty,x,1,x,x,x,x"
cmtm150 "12345xx,PortaliSouth,XBG,x,x,Ford Auto 1,load,general-autoparts,24,Toledo OH,empty,x,1,x,x,x,x"
cmtm156 "12345xx,PortaliSouth,XBG,x,x,Ford Auto 2,load,general-autoparts,24,Toledo OH,empty,x,1,x,x,x,x"
cmtm162 "12345xx,PortaliSouth,XGT,x,x,Plasti Pak,load,x,48,Toledo OH,empty,x,1,x,x,x,x"
cmtm169 "12345xx,PortaliSouth,XBG,x,x,GM Power Train 1,empty,x,24,Toledo OH,load,general-autoparts,1,x,x,x,x"
cmtm177 "12345xx,PortaliSouth,XBG,x,x,GM Power Train 2,empty,x,24,Toledo OH,load,general-autoparts,1,x,x,x,x"
cmtm185 "12345xx,PortaliSouth,XBG,x,x,AC Delco 1,empty,x,24,Detroit MI,load,general-autoparts,1,x,x,x,x"
cmtm187 "12345xx,PortaliSouth,XBG,x,x,AC Delco 2,empty,x,24,Detroit MI,load,general-autoparts,1,x,x,x,x"
cmtm189 "12345xx,PortaliSouth,XBG,x,x,AC Delco 3,empty,x,24,Detroit MI,load,general-autoparts,1,x,x,x,x"
cmtm191 "12345xx,PortaliSouth,XBG,x,x,AC Delco 4,empty,x,24,Detroit MI,load,general-autoparts,1,x,x,x,x"
cmtm195 "12345xx,PortaliSouth,XBG,x,x,AC Delco 5,empty,x,24,Detroit MI,load,general-autoparts,1,x,x,x,x"
cmtm197 "xx3x5xx,PortaliSouth,XFM,x,x,Milford Lumber,load,x,72,Midland MI,empty,x,72,x,x,x,x"
cmtm201 "1234567,PortaliSouth,XBG,x,x,Spartain Foods,load,x,12,Toledo OH,empty,x,1,x,x,x,x"
cmtm204 "1234567,PortaliSouth,XGT,x,x,Korex TK1,load,x,12,Midland MI,empty,x,12,x,x,x,x"
cmtm210 "1234567,PortaliSouth,XTS,x,x,Korex TK2,load,x,12,Toledo OH,empty,x,12,x,x,x,x"
cmtm219 "1234567,PortaliSouth,XTS,x,x,Detroit MI,empty,x,x,x,x,x,x"
cmtm220 "1234567,PortaliSouth,XTS,x,x,Detroit MI,empty,x,x,x,x,x,x"
cmtm221 "1234567,PortaliSouth,XGT,x,x,Detroit MI,empty,x,x,x,x,x,x"
cmtm222 "1234567,PortaliSouth,XGT,x,x,Detroit MI,empty,x,x,x,x,x,x"
cmtm223 "1234567,PortaliSouth,XBG,x,x,Detroit MI,empty,x,x,x,x,x,x"
cmtm224 "1234567,PortaliSouth,XBG,x,x,Detroit MI,empty,x,x,x,x,x,x"
cmtm225 "1234567,PortaliSouth,XFM,x,x,Detroit MI,empty,x,x,x,x,x,x"
cmtm226 "1234567,PortaliSouth,XFM,x,x,Detroit MI,empty,x,x,x,x,x,x"
cmtm227 "1234567,PortaliSouth,XG,x,x,Saginaw MI,load,coal,x,x,x,x,x"
cmtm228 "1234567,PortaliSouth,XG,x,x,Saginaw MI,load,coal,x,x,x,x,x"
cmtm229 "1234567,PortaliSouth,XHT,x,x,Saginaw MI,empty,x,x,x,x,x,x"
cmtm230 "1234567,PortaliSouth,XHT,x,x,Saginaw MI,empty,x,x,x,x,x,x"
 
When processing thru records, the car type does not matter, so only two records are needed. It is my guess that you other problem has to do with individual cars. Make sure that they all have product queues that are properly set-up.
 
New issue in TANE.

When I get a train via CMTM iPortal I dont get records added to the cars. I do get a train ID, but no bug or error message. My iPortal is named with proper capitalization the same as in my records. (I copy and pasted it.) And my car's are set up for CMTMS. At this point I'm stumped.

cmtm7 "1234567,PortaliToledoE,XGB,x,x,Heidtman Steel Products,load,scrap-metal,48,Toledo OH,empty,x,48"
cmtm8 "1234567,PortaliToledoE,XGB,x,x,Heidtman Steel Products,load,scrap-metal,48,Toledo OH,empty,x,48"
cmtm9 "1234567,PortaliToledoE,x,x,x,Saginaw MI,empty,x,x,Saginaw MI,empty,x,x"
cmtm10 "1234567,PortaliToledoE,x,x,x,Saginaw MI,empty,x,x,Saginaw MI,empty,x,x"
 
New issue in TANE.

When I get a train via CMTM iPortal I dont get records added to the cars. I do get a train ID, but no bug or error message. My iPortal is named with proper capitalization the same as in my records. (I copy and pasted it.) And my car's are set up for CMTMS. At this point I'm stumped.


Bump.

Anyone figure this out in TANE?
 
BUMP

Still toying with iPortals for reasons. TANE gives a random train ID, but I get no error message and no records for my train. Ive used both the built in, and CMTM iPortal with no luck.

I've tried to set up the quick portal manager, but I am clueless how to configure it for iPortals. Since I never quite know what I might get from another player.
 
BUMP

Still toying with iPortals for reasons. TANE gives a random train ID, but I get no error message and no records for my train. Ive used both the built in, and CMTM iPortal with no luck.

I've tried to set up the quick portal manager, but I am clueless how to configure it for iPortals. Since I never quite know what I might get from another player.
As far as I know QPM does not work with iPortals.
 
From what I know I think Dap is done with Trainz, form my understanding. But maybe someone else knows whats up. I got the iPortalBasicCMTM to work in Trainz19. I had to update the build number and remove the iPortal library TRS12 for the iPortal library TRS12. So trains will come out of the iPortal.

I've done everything so records should be working. However I'm not getting any records to assign to the cars. I get the following error messages.

- <kuid2:32711:100559:5> : File cmtmsystem4.gs, Line 1815, ER_Timeout ; <kuid2:32711:100559:5> : Script class: CMTMSystem4 ; <kuid2:32711:100559:5> : Object: ScriptableObject{0x1117ef430; asset:SpecReference{<kuid2:32711:100559:5> "CMTMSystem4"}, class:GSClass{0x659d5f58: CMTMSystem4}, refcount:7} ; <kuid2:32711:100559:5> : Script callstack ; <kuid2:32711:100559:5> : function $void@CMTMSystem4::ExitingTrainHandler(Message), line 1704 - <kuid:32711:100456> : File iportalbasiccmtm.gs, Line 1837, ER_Timeout ; <kuid:32711:100456> : Script class: iPortalBasiccmtm ; <kuid:32711:100456> : MeshObject: <kuid:32711:100456> "iPortalBasicCMTM" ; <kuid:32711:100456> : Script callstack ; <kuid:32711:100456> : function $void@iPortalBasiccmtm::EmitTrain(), line 1543 ; <kuid:32711:100456> : function $void@iPortalBasiccmtm::CheckEmitTrains(), line 1887 ; <kuid:32711:100456> : function $void@iPortalBasiccmtm::ThreadEmitTrains(), line 1869

Im going to poke around the script a bit with my roommate who knows quite a bit about scripting, but I'm hoping Dap or someone else might have a better idea of what to do to fix this.
 
Back
Top