Replacing the bogies of the built-in US-freightcars

Swordfish

Well-known member
I don't like the bogies of the built-in US-freigthcars. That's why I replaced them with the following bogies:

Baby Ruth High Cube Boxcar kuid 86105:50003
Co-op Bulk hopper kuid 45681:50001
GAT-X oil tanker kuid 45681:50001
IC 4 bay hopper kuid 45681:50001
IC 4 bay hopper loaded kuid 45681:50001
Pen Salt GATX tanker kuid 86105:50003
PRR FM flat car kuid 45681:50001
PRR 40' boxcar kuid 45681:50001
PRR 50' boxcar kuid 45681:50001
PRR 60' boxcar kuid 45681:50001
3dtcar kuid 86105:50003

Do you have any ideas to replace the bogies of other rollingstock, or do you have better bogies for the above mentioned cars?

Regards

Swordfish

:) :) :)
 
Have you got :-

"36in 2axle truck" <kuid2:86105:50003:0>
add this to the config obsolete-table kuid:-1:100080 and that will obsolete one of the built-in bogies.

36x70in Rollerbearing Truck <kuid:76096:50000:1>
add to obsolete-table KUID:-1:100080 KUID:-1:100065

"Bettendorf2" <kuid:58422:50120>
add to obsolete-table kuid:-3:10064

"rev-1 36x76in USA roller bearing trucks (bogies)" <kuid:58377:50053>
add to obsolete-table kuid:-1:100827

"33x68 USA bogies" <KUID:45681:50001>
add to obsolete-table kuid:-1:100011 kuid:-1:100008 kuid:-1:100073 kuid:-1:100074 kuid:-1:10007
kuid:-1:100075



disable-extra-track-sounds 1 for TRS2


Open the config.
Find the bogey line.
Then change
100080 or <kuid:-1:100080> to <kuid2:86105:50003:0> or <kuid:76096:50000:1>

change
100065 or <kuid:-1:100065> to <kuid:76096:50000:1>

change
<kuid:-3:10064> to <kuid:58422:50120>

change
100827 or <kuid:-1:100827> to <kuid:58377:50053>

change
100011
100008
100073
100074
10007
100075 to <KUID:45681:50001>
 
Thank you colin55! :)

As far as I know, the obsolete-function of built-in objects is omitted in TRS2006, but I will test it.

Regards

Swordfish
 
You're right, for 2006 you have to change every config:(, lots of work, but more realistic!
Obsoleting was much easier!
 
Swordfish, I wanted to do that too so I used the kuid's that you posted. I tried it on the gatx tanker and the tanker dissapeared. What did I do wrong?



Don
 
GAT-X oil tanker kuid 45681:50001

This is the one he talks about. I don't see why the whole tanker should dissapear just because the bogie kuid was changed.

These are the others he changed

Baby Ruth High Cube Boxcar kuid 86105:50003
Co-op Bulk hopper kuid 45681:50001
GAT-X oil tanker kuid 45681:50001
IC 4 bay hopper kuid 45681:50001
IC 4 bay hopper loaded kuid 45681:50001
Pen Salt GATX tanker kuid 86105:50003
PRR FM flat car kuid 45681:50001
PRR 40' boxcar kuid 45681:50001
PRR 50' boxcar kuid 45681:50001
PRR 60' boxcar kuid 45681:50001
3dtcar kuid 86105:50003


Don
 
The built-in tanker I mentioned is "GATX oiltanker" kuid:-3:10035. I' m working with TRS2007, that is the German version of TRS2006.

The changend part of the config.txt after inserting the new bogie:

PHP:
name                            "GATX Oil Tanker"
mass                            14000
company                            "Oily Rag & Co"
bogey                            <kuid:45681:50001>
kind                            "traincar"
enginespec                        <kuid:-1:42004201>
script                            "GATX_oilco"
clas
@Sardon
If it was the above mentioned tanker you changed the bogie, you can revert it to the original by right-clicking it in CMP, then select "edit" and then "revert to the original". :)

Regards

Swordfish
 
No it was the 2006version that I changed. That is probably why it didn't work. There must be some bogies that look good that I can use on my model.

Don
 
No I didn't. I don't mess with this kind of thing hardly ever. I just wanted some better looking bogies on that gatx tanker. Guess I should keep out of there. I will try again though and do what you said.

Don
 
been following this thread and tonight braved myself to change some bogies.
works a treat and looks far better than the originals which had no moving parts.
Thanks Gents.
 
I just edited the config.txt file of the GATX Tanker (kuid:-3:10035) to change the bogie from:
100080
TO:
<kuid:45681:50000>

saved and commited without error. Works fine. Shiny wheel surfaces and animated Timken roller bearings.

Bob
 
no sorry i didn't, strictly coal hoppers at the moment. They also show in saved sessions prior to bogie change.
it was mentioned earlier in this thread, clone the GATX first in content manager as it is a built in item. note the new Kuid number, do a search under that number, go into config file, open edit( i use explorer) find bogie kuid and alter. I used 58377:50053.
 
Back
Top