Looking for a 6-8ft ladder

[rick1958]

Does anyone know of a 6-8ft ladder that can be angled to fit a scene? There are ladders on the DLS but all way too big. Photo is for reference to what I'm looking for. I got the trucks off the shay. Now I just need a ladder for the repairs. The ladder against the front truck is what I'm looking for but also able to be stood upright

[url=https://ibb.co/398tcPXh][/URL]

 

[stagecoach]

If you have TRS22 with S.2 you can angle any asset to any position you want.

 

[rick1958]

@stagecoach I got a small problem with that... I don't have '22 OR the ladder to angle if I did . Thanks anyway though.

 

[stagecoach]

Any height ladder can be used, just lower it into the ground for the required height. See this other post for angle

R

Thread 'Tilting an asset?'

Jul 15, 2011

Is there any way to tilt an asset? For example, I have a sign that was created perpendicular to the ground (90 degrees) and I would like it to lean a little to one side (say 75-80 degrees). Is there any way to do that?

• Ricke82
• Replies: 5
• Forum: Surveyors, Operators & Engineers

 

[Bob_Ross]

I'm willing to bet that mick1960 has built one.

 

[Frank_Dean]

There are several ladders at the DLS, I made some wooden ones with 10 steps, maybe they will be useful to you.
<kuid:236618:20221154> OldWest.Ladder.Horizontal.1
<kuid:236618:20221155> OldWest.Ladder.Horizontal.2
<kuid:236618:20221156> OldWest.Ladder.Vertical

 

[rick1958]

Any height ladder can be used, just lower it into the ground for the required height. See this other post for angle

R

Thread 'Tilting an asset?'

Jul 15, 2011

Is there any way to tilt an asset? For example, I have a sign that was created perpendicular to the ground (90 degrees) and I would like it to lean a little to one side (say 75-80 degrees). Is there any way to do that?

• Ricke82
• Replies: 5
• Forum: Surveyors, Operators & Engineers

I REALLY should have thought of that! Thanks

 

[rick1958]

There are several ladders at the DLS, I made some wooden ones with 10 steps, maybe they will be useful to you.
<kuid:236618:20221154> OldWest.Ladder.Horizontal.1
<kuid:236618:20221155> OldWest.Ladder.Horizontal.2
<kuid:236618:20221156> OldWest.Ladder.Vertical

Thanks. I guess they didn't pop up in a search for "ladder" due to the longer name.

 

[rick1958]

The shop really needs to build a lighter ladder. This thing is killing my back!
[url=https://ibb.co/zTLY2vZv][/URL]

 

[JCitron]

The shop really needs to build a lighter ladder. This thing is killing my back!
[url=https://ibb.co/zTLY2vZv][/URL]

It looks like the shop used 6 x 8s to build that very sturdy ladder.

 

[Dinorius_Redundicus]

There are many different ladders on the DLS. Here are a few more that might suit your scene;

<kuid2:68213:26004:2> Ladder 01
A simple ladder for commercial, industrial or domestic purposes. To lean it against a wall or lay it flat, use the Roll (Shift-Rotate) function in Surveyor. The pivot point is at the base.

<kuid2:68213:26005:1> Ladder 02
An extension ladder for commercial, industrial or domestic purposes. To lean it against a wall or lay it flat, use the Roll (Shift-Rotate) function in Surveyor. The pivot point is at the base.

<kuid:283805:2804005> Misc ladder 10m angled 1 black
<kuid2:283805:2804006:1> Misc ladder 10m vertical black

<kuid2:156733:10213:1> ladder
<kuid2:156733:10214:1> ladder slanting

 

[rick1958]

There are many different ladders on the DLS. Here are a few more that might suit your scene;

<kuid2:68213:26004:2> Ladder 01
A simple ladder for commercial, industrial or domestic purposes. To lean it against a wall or lay it flat, use the Roll (Shift-Rotate) function in Surveyor. The pivot point is at the base.

<kuid2:68213:26005:1> Ladder 02
An extension ladder for commercial, industrial or domestic purposes. To lean it against a wall or lay it flat, use the Roll (Shift-Rotate) function in Surveyor. The pivot point is at the base.

<kuid:283805:2804005> Misc ladder 10m angled 1 black
<kuid2:283805:2804006:1> Misc ladder 10m vertical black

<kuid2:156733:10213:1> ladder
<kuid2:156733:10214:1> ladder slanting

The last one shown is the one on my screenshot. The "ladders black" might be an option. I really need to drag out Gmax again. It's been a LONG time! Thanks for the links

 

[rick1958]

There are many different ladders on the DLS. Here are a few more that might suit your scene;

<kuid2:68213:26004:2> Ladder 01
A simple ladder for commercial, industrial or domestic purposes. To lean it against a wall or lay it flat, use the Roll (Shift-Rotate) function in Surveyor. The pivot point is at the base.

<kuid2:68213:26005:1> Ladder 02
An extension ladder for commercial, industrial or domestic purposes. To lean it against a wall or lay it flat, use the Roll (Shift-Rotate) function in Surveyor. The pivot point is at the base.

<kuid:283805:2804005> Misc ladder 10m angled 1 black
<kuid2:283805:2804006:1> Misc ladder 10m vertical black

<kuid2:156733:10213:1> ladder
<kuid2:156733:10214:1> ladder slanting

[url=https://ibb.co/8JKSZ03][/URL]

Ladders Black... Much better!! thanks for the tip!

 

[JimDep]

You can borrow mine but I'll need it back...

 

[blueodessey]

You can borrow mine but I'll need it back...

A friend in need is a Friend indeed, Our Forum is wonderful group of members. Teamwork... Peace

 

[ricomon35]

@rick1958 - How long and how wide a ladder do you need. I have a some ladders I made for Hangman. Wood one's.
I can easily resize them, and make them rotate-able.

 

[rick1958]

@rick1958 - How long and how wide a ladder do you need. I have a some ladders I made for Hangman. Wood one's.
I can easily resize them, and make them rotate-able.

Hey Rico to the Rescue. About like the screenshot...Maybe 6ft? I'm looking for something that would have been shop built and hanging on the wall. I'd paint it the shop color as you might see. Thanks for the offer.

 

[JCitron]

@rick1958 - How long and how wide a ladder do you need. I have a some ladders I made for Hangman. Wood one's.
I can easily resize them, and make them rotate-able.

Do they come with a stack of letters? Asking for a friend...

 

[ricomon35]

Do they come with a stack of letters? Asking for a friend...

@JCitron >>>

Checking......
Cultural reference database...

No match found....

You lost me with that one....

 

[rick1958]

@JCitron >>>

Checking......
Cultural reference database...

No match found....

You lost me with that one....

Sorry John... Scratching my head also