Kuid not of correct type

[nimec]

Having recently downloaded Transcevenol 2010 I have a number of faulty assets one of which is Paul Hobbs' RCH 1907 7 Plank HCC #14,<kuid2:44090:15054:1>
The errors are
Error: The kuid '<kuid2:30671:27206:1>' specified in 'product-kuid' is not of the correct type.
Error: The kuid '<kuid2:30671:27206:1>' specified in '0' is not of the correct type.
If they are not of the correct type how can I find the correct type?
If Paul Hobbs is reading this do you have the answer for me?
I will give you my email address if you are prepared to send me the .cdp file for the error free asset.Cheers

 

[rweber95]

It would be good experience for you to do your own correcting.
kuid2:30671:27206:1 the kuid for a building, not coal.
To eliminate this error, start CM3.3, find the kuid, right click it and select Edit - Edit in Explorer. Now double click the config.txt file to open it in Notepad. Scroll down to find this lars-coal container:

lars-coal
{
size 10160
initial-count 0
animated-mesh "load"
product-kuid "<kuid2:30671:27206:1>"

allowed-products
{
0 "<kuid2:30671:27206:1>"
}

Now delete just those lines. Since you've removed the lars-coal entry you have to correct the conflicts-with-queues sections. When you find that section, remove each place where there is a line for "lars-coal" and renumber the remaining lines to be consecutive (ie 0, 1 .2, etc.). There are a total of 4 places.

Finally Save and Commit

Bob Weber

 

[stagecoach]

Replace the faulty kuid with kuid:44179:60013 which is what he used in the previous version of this model.

 

[Dinorius_Redundicus]

..also kuid numbers should not have "quote" marks around them. So many errors, so little time...

 

[nimec]

Bob, I followed your instructions to the letter but after committing it, it was still faulty.
A check of the errors this time showed
Error: The Tag '0' is not permitted within a container of type 'conflicts-with-queues'.
Error: The Tag '1' is not permitted within a container of type 'conflicts-with-queues'.
Error: The Tag '2' is not permitted within a container of type 'conflicts-with-queues'.
Error: The Tag '3' is not permitted within a container of type 'conflicts-with-queues'.
Error: The Tag 'lars-bauxite' is not permitted within a container of type 'traincar'.
Before I try to remove the Tags would you give me an example please of how to do it as you did in your earlier post? Thanks.
I tried to find the earlier version kuid suggested by stagecoach but couldnt on the DLS so still have to fix this one.
Cheers

 

[stagecoach]

The earlier one is on the DLS http://www.auran.com/TRS2004/DLS_downloadasset.php?DownloadID=27984 and it shows up fine in 09 except for the icon 0 line needs to be deleted.

 

[patchy]

Bob, I followed your instructions to the letter but after committing it, it was still faulty.
A check of the errors this time showed
Error: The Tag '0' is not permitted within a container of type 'conflicts-with-queues'.
Error: The Tag '1' is not permitted within a container of type 'conflicts-with-queues'.
Error: The Tag '2' is not permitted within a container of type 'conflicts-with-queues'.
Error: The Tag '3' is not permitted within a container of type 'conflicts-with-queues'.
Error: The Tag 'lars-bauxite' is not permitted within a container of type 'traincar'.
Before I try to remove the Tags would you give me an example please of how to do it as you did in your earlier post? Thanks.
I tried to find the earlier version kuid suggested by stagecoach but couldnt on the DLS so still have to fix this one.
Cheers

just delete the lines in config
if you not sure,just clone the asset and go for your life
asset fixing isn't as hard as you think
have a look here http://forums.auran.com/trainz/showthread.php?t=56002

cheers,
patchy

 

[nimec]

Thanks all for your help.
Gremlin1812 sent me an email detailing and explaning how to fix it by downloading the one stagecoach suggested then replacing using the edit menu.