how do I add crude oil and disel fuel to a tanker config file

[brakemen]

hello hope you can help me on this one


I just downloaded a 60 ft tanker and a 40ft tanker. but the 60 ft is made for gas, chemicals like lpg, lng. and the 40 ft is not industry active gives a grey box. so what I was thinking was to go to the config file of both tankers and add crude oil and disel fuel. question how would I put the kuid in the config file and where can I get them? another word what are the steps to put in the kuids to make both tankers active.

on the 60 ft tanker I clicked on the black plus and looked for oil and disel fuel but not there

now all I need is to find an industry that have all the gases maybe a gas refinery plant if theres one out there for trs06 compatible

breakemen

 

[fran1]

You'll have to go into CMP and use the search function and put crude oil in, that will give you the kuid number. Then find the tanker and open for edit in explorer and add that kuid in the same way as the others. Clone it first just in case you make a mistake and alter the clones config. If your not going to use say kaolin you could remove that kuid and replace with the crude kuid.
The non industry active one I don't know about.

 

[mtldrm38]

You can open the tankers in CCP on the tree list to the right you will see
usually load0 or 1 etc... open that to see product then click that and theyre you can add any product you want by right clicking product add kuid and another window will open at the top choose product this will make it easier to find crude oil etc...................Once ya get hang of its a cake walk with any
freight car...........

Once all products added save and close.........
note it may hang up at times usually does..........
so be patient after the screen flashes you ll be back to the cmp for which you can then commit............

At trainz Pro Routes look up Proto Lars this bundle will have a large assortment of track industries that include assortment s for refineries etc.........
Or another choicew is the M.I.N. track industry which handles any product.......
and of course in 2006 theyre is a built in refinery industry with a crude in and assortment out loading tracks............

Dave =)

 

[philskene]

brakemen --

"question how would I put the kuid in the config file and where can I get them? another word what are the steps to put in the kuids to make both tankers active."

I'm assuming you be using 06/09/10?

If so fire up CMP/2/3, find a tank car in the list that is industry interactive and look at the config.txt file by highlighting the tank car, right clicking and selecting "View Config File".

You will probably see somthin' like this:

queues
{
load
{
size 79500
initial-count 0

allowed-products
{
0 <kuid:-3:10010>
1 <kuid:-3:10011>
2 <kuid:-3:10012>
3 <kuid:-3:10045>
}
}
}

Copy this, find the tank car you want to modify, highlight the tank car and press Crtl-Shift-E to open it for editing. Double click on the config.txt file to open it. Paste the queues in the right place, save and exit. Commit (from "Edit" at top left).

Test to see how it goes.

Tell me if this helps.

Phil

 

[bnsf50]

now all I need is to find an industry that have all the gases maybe a gas refinery plant if theres one out there for trs06 compatible

breakemen

Get the "oil refinery lng" made by Vulcan. It loads lng, oil and diesel both on rail tankers and ocean tankers and is even animated. Get the ocean tankers and other items that go with it while you're there.
http://www.ianztrainz.com.au/index.html