Grade crossing problem

[Richard_Dodge]

This is for bnsf50. On your grade crossings. Can not get the track to show up over the roadway when I reconnect the existing track to the crossing. I am thinking there is a way to this but do not have clue.
Would you please let me know how!
Thank you and have a good day.
Richard

 

[Steveo241]

Hi Richard,

If you are only seeing the rails over the pavement on the road, then all is working correctly. I'm pretty sure of that. If you see no rails at all, then you should contact bnsf50. Also, if the pavement doesn't change when the road hits the crossing, you may not be using a BNSF50 road, which blends in with the crossing. A default road from Auran will just go over the rails and crossing.

Hope this helps,

Steveo241

 

[bnsf50]

This is for bnsf50. On your grade crossings. Can not get the track to show up over the roadway when I reconnect the existing track to the crossing. I am thinking there is a way to this but do not have clue.
Would you please let me know how!
Thank you and have a good day.
Richard

As Steve said it sounds like you're using the wrong road. Connect a road that ends in the word bnsf50. You may have to delete and reset the crossing to get things straightened out. Then after connecting the road and track, click the ? mark in the objects window and the road crossing and apron texture can be changed to match the road.

 

[Steveo241]

I didn't know you could do that!

 

[bnsf50]

I didn't know you could do that!

Yep there's like 25 different textures to choose from.

 

[Steveo241]

Awesome! Found how to do it, and posted a picture of it in USA Pics

Thanks a bunch!

 

[Richard_Dodge]

road crossing

Thanks bnsf50 and to all who answered.
again have a good day.
Richard