3 Speed Speed board problems

[UncleBuck]

I am trying to use the speed boards developed by @Ranger_51 but I just can't seem to get them to work properly.

I have several boards where the speeds are set as (priority 3) 60 Km/Hr (priority 2) 80 Km/Hr and (priority 1) 100 Km/Hr.
Speeds are visible and active on all boards.

On approaching a speed board, I only see the priority 3 speed in the driver display (i.e. Track Profile) and then after I pass the board the speed limit changes to to suit the priority of the train that just passed it.

This is particularly annoying with AI drivers as they slow down for every board and then speed up again after they pass the board.

Can anybody tell me what I am doing wrong?

Colin.

 

[pware]

Your description did not include the priority levels that you had assigned to each consist.

 

[UncleBuck]

Your description did not include the priority levels that you had assigned to each consist.

I have tried all three priorities on a number of different consists with the same results.
Only the priority 3 consist sees the correct speed in the track profile which causes the priority 1 and 2 AI consists to slow down to the priority 3 speed and then speed up again after passing the speed board.

 

[Christopher824]

I would check if your dependencies are up to date. Here is a list of the current ones I know about, fairly recent dates on these

<kuid2:209857:101002:1> LIB | R51 NSW Speed Signs - Font (Black)
<kuid2:209857:101004:1> LIB | R51 NSW Speed Signs - Font (Red)
<kuid2:209857:101003:1> LIB | R51 NSW Speed Signs - Font (White)
<kuid2:209857:102:7> LIB | R51 Signal Kit | Mesh - Signal Parts (Modern)
<kuid2:209857:101006:1> LIB | R51 NSW Speed Signs - Font (Yellow)
<kuid2:209857:101005:1> LIB | R51 NSW Speed Signs - Marker
<kuid2:209857:101001:1> LIB | R51 NSW Speed Signs - Mesh Lib
<kuid2:209857:101000:1> LIB | R51 NSW Speed Signs - Script Lib
<kuid2:209857:101:11> LIB | R51 Signal Kit | Script Lib 2

These two were put on the DLS today
<kuid2:209857:120:8> LIB | R51 Signal Kit | Mesh - Lamp Effects
<kuid2:209857:102:7> LIB | R51 Signal Kit | Mesh - Signal Parts (Modern)

 

[UncleBuck]

I have checked all the dependencies and they are all up to date.
Even the two you say were uploaded today show in my CM as being uploaded to the DLS on 24th Sep 2023 and 17th Apr 2023 respectively.

Cheers,
Colin

 

[UncleBuck]

Just in case people are not really sure what I am on about, I have included two images.
The consist was set to Priority 1 and the three speeds are visible and active.
Approaching speed board...

Loco (not entire consist) has passed speed board.....