PDA

View Full Version : Missing kuid:79097:1048



rweber95
September 24th, 2009, 11:30 PM
Route Aotearoa113 V2, kuid:174941:1178, is missing kuid:79097:1048 made by TheCowboy. Anyone know where I can get it?

Bob

Dylanviey
August 16th, 2011, 12:00 PM
it's his coaling tower or water column (i forget witch i used in it.) but it's available on his website here http://www.cowboystrainzstation.com/buy_the_up_9000.htm

jordon412
August 16th, 2011, 01:28 PM
Here's a list of Missing Dependencies:
Interstate Railroad 2-8-0 3a by cincysouthernrwy
kuid:96914:504860
kuid:96914:504861
kuid:96914:504862
kuid:96914:51486
kuid:96914:54104
kuid:96914:55201

S&A 4-6-2 750 by bdaneal
kuid:96914:51750
kuid2:96914:53750:1

Tennessee Central 2-8-0 334 by cincysouthernrwy
kuid:96914:504860
kuid:96914:504861
kuid:96914:504862
kuid:96914:51486
kuid:96914:54104
kuid:96914:55201

Baldwin light 2-8-2 by bdaneal
kuid:-3:10105
kuid:96914:54516

NS F7A by smash
kuid:37581:1151
kuid2:45324:28100:1
kuid2:45324:50022:2

Can anyone help me get these kuids or find an alternative?

Jamesfaa
August 16th, 2011, 01:36 PM
Interstate Railroad 2-8-0 3a by cincysouthernrwy
kuid:96914:504860
kuid:96914:504861
kuid:96914:504862
kuid:96914:51486
kuid:96914:54104
kuid:96914:55201

S&A 4-6-2 750 by bdaneal
kuid:96914:51750
kuid2:96914:53750:1

Tennessee Central 2-8-0 334 by cincysouthernrwy
kuid:96914:504860
kuid:96914:504861
kuid:96914:504862
kuid:96914:51486
kuid:96914:54104
kuid:96914:55201

For these listed kuids I would try searching Subpar Pruductions. http:\\steammachine.com/bdaneal/index/html

Edit: Some may be in common packs for the related item.

rweber95
August 16th, 2011, 01:52 PM
The following lists kuid-subpar listing=downloaded filename.
kuid:96914:504860-Common Files = blw_common.cdp
kuid:96914:504861-Modern 2-8-0 (Consolidation) = blw_cons.cdp
kuid:96914:504862-Common Files = blw_common.cdp
kuid:96914:51486-Modern 2-8-0 (Consolidation) = blw_cons.cdp
kuid:96914:54104-Common Files = blw_common.cdp
kuid:96914:51750-Common files for FEC Pacifics/fecpaccom.cdp
kuid:96914:55201-Shortline Steam Cab = blw_cab.cdp

Bob Weber

jordon412
August 17th, 2011, 10:29 AM
I have another list of kuids that I need help trying to resolve. This list comes from the 'view dependencies' (right click) in the Content Manager:

USRA Light 4-8-2 by bdaneal:
usra lmount b0 kuid:96914:504870 (broken)

usra lmount b0 by bdaneal:
USRA Light 4-8-2 kuid:96914:4780 (broken)

Baldwin medium 2-8-0M and Baldwin medium 2-8-0H by bdaneal:
blw con b2 kuid:96914:504862 (broken)

blw con b2 by bdaneal:
Baldwin medium 2-8-0H kuid:96914:4862 (broken dependency)
Baldwin medium 2-8-0M kuid:96914:4860 (broken dependency)
Interstate Railroad 2-8-0 3a kuid:45588:2077 (broken dependency)
Tennessee Central 2-8-0 334 kuid:45588:2023 (broken dependency)

Baldwin light 2-8-2 by bdaneal:
kuid:-3:10105 (unkown)
kuid:96914:54516 (unkown)

Can anyone provide some help in resolving this problem?

rweber95
August 17th, 2011, 08:50 PM
pb15,<kuid:-3:10105> is the enginesound for the QR PB15 loco and is builtin to all versions of Trainz since UTC. If you don't have it you might have a faulty installation.

kuid:96914:54516 may be found at http://www.steammachine.com/bdaneal/ngdl.htm. Go to the link and scroll down to find EBT Heavy 2-8-2 #17 and download file ebt-17.cdp.

The rest of your list tells me nothing. Just saying broken or broken dependency means nothing as far anyone being able to help you. You should post the error msg you see in CM. It is easier to just work one faulty loco at a time since the solution to one may apply to the others so you won't have to copy/paste a lot of error msgs. Also post which version you're seeing these problems in.

Bob Weber

jordon412
August 17th, 2011, 09:57 PM
The ones I have listed appears in my 'railyard' and in the 'vehicles' tab when I'm in surveyor, but they are lettered in red. I did not see the QR PB15 does not show up as a vehicle in the 'vehicles' tab in surveyor nor the railyard. Here's the revised list:
usra lmount b0 by bdneal (Needed for USRA Light 4-8-2 and USRA Light 2-10-2):
kuid:96914:4780
'Errors & Warnings':
This asset uses an obsolete trainz-build number. Trainz-build numbers below 2.7 are no longer supported.
Required container 'thumbnails' is missing.
Unable to load primary texture 'windows.tga' for texture file 'windows-windows_a.texture.txt'.
Unable to load alpha texture 'windows_a.bmp' for texture file 'windows-windows_a.texture.txt'.
The primary and alpha texture are not the same size for 'windows-windows_a.texture.txt'.
Binary conversion failed for texture resource 'windows-windows_a.texture.txt'.

USRA Light 4-8-2 (and USRA Light 2-10-2) by bdneal:
'Errors and Warnings':
This asset uses an obsolete trainz-build number. Trainz-build numbers below 2.7 are no longer supported.
Required tag 'color' was missing and has been set to default.
Required container 'thumbnails' are missing.
Attachment point attachment (a.stoker) in 'soundscript\dayloop2' was not found.

Baldwin Light 2-8-2 by bdneal:
kuid:96914:54516 is unknown
'Errors and Warnings':
Dependcy kuid:96914:54516 is unknown.
This asset uses an obsolete trainz-build number. Trainz-build numbers below 2.7 are no longer supported.
Required container 'thumbnails' are missing.

Baldwin medium 2-8-0H (and Baldwin medium 2-8-0M) by bdneal:
'Errors and Warnings':
This asset uses an obsolete trainz-build number. Trainz-build numbers below 2.7 are no longer supported.
Required tag 'color' was missing and has been set to default.
Required container 'thumbnails' are missing.
This asset requires a shadow mesh, but the mesh table does not contain one.

blw con b2 by bdneal:
'Errors and Warnings':
This asset uses an obsolete trainz-build number. Trainz-build numbers below 2.7 are no longer supported.
Texture 'engine_black.texture' is missing or could not be loaded for mesh 'blw_con_b2.im'.
Required container 'thumbnails' are missing.

Any Advice?

rweber95
August 18th, 2011, 10:48 PM
To start with, you forgot the include the operative words 'error' and/or 'warning'. Which of the above are errors and which are warnings? You can ignore the warnings since they won't preclude your using them. Just fix the errors.

Bob Weber

jordon412
August 19th, 2011, 10:29 AM
I got the Baldwin Light 2-8-2 to work, but here's the revised list:

USRA 2-10-2 (and USRA 4-8-2):
'Errors and Warnings'
1 Error:
Attachment point attachment (a.stoker) in 'soundscript\dayloop2' was not found

usra lmount b0:
'Errors and Warnings'
4 Errors:
Unable to load primary texture 'windows.tga' for texture file 'windows-windows_a.texture.txt'
Unable to load alpha texture 'windows_a.bmp' for texture file 'windows-windows_a.texture.txt'
The primary and alpha texture are not the same size for 'windows-windows_a.texture.txt'
Binary conversion failed for texture resource 'windows-windows_a.texture.txt'

blw con b2:
'Errors and Warnings'
1 Error:
Texture 'engine_black.texture' is missing or could not be loaded for mesh 'blw_con_b2.im'

What can I do to correct these errors?

rweber95
August 20th, 2011, 02:22 AM
USRA 2-10-2.
A check of the mesh shows there is no a.stoker attachment point so use Content Manager, right click kuid and select Edit - Edit in Explorer. Double click the config.txt file and delete the dayloop2 container. In case you don't know what a container looks like, these are the lines to delete:


dayloop2
{
repeat-delay 0
distance 5,150
attachment "a.stoker"
volume 0.75

sound
{
sound/stokereng.wav
}
}

then save and commit.

usra lmount b0:
Open it for Edit - Edit in Explorer and delete this file:
windows-windows_a.texture.txt
then save and commit.

blw con b2:
You need to find or make a small black texture file and name it engine_black.ext and then create a small text file using Notepad and save it as engine_black.texture.txt. The contents of this text file are:

Primary=engine_black.ext
Tile=st

Open blw con b2 for Edit - Edit in Explorer and put the texture file and the text file in it, then save and commit.
Note. The term .ext is the file extension abreviation. If you make a bitmap texture file it will be .bmp. If you find a targa texture file it will be .tga. Replace the occurances of .ext in my instructions with the suitable extension.

Bob Weber

RPearson
August 20th, 2011, 02:47 AM
USRA 2-10-2.
A check of the mesh shows there is no a.stoker attachment point so use Content Manager, right click kuid and select Edit - Edit in Explorer. Double click the config.txt file and delete the dayloop2 container.

Alternate is to edit the dayloop2 container and change attachment tag value "a.stoker" to "a.limback". This attachment point exists in the mesh and is located within a few feet of actual location of the stoker engine.

Bob Pearson

jordon412
August 24th, 2011, 01:57 PM
I was able to get the USRA 2-10-2 and 4-8-2 to work, but I need somebody to explain in layman's terms how to resolve the problem with blw con b2.

rweber95
August 24th, 2011, 08:01 PM
blw con b2,<kuid2:96914:504862:1> is builtin in TS2010 and has NO errors. If you've edited it and commited it will have errors. Open it for Edit the right click it and select revert or revert to original, whichever is available.

Bob Weber

jordon412
August 27th, 2011, 09:38 PM
I think I may have found the problem. I went into one of my 2-8-0s and it shows that blw con b2 has the KUID <kuid:96914:504862>, not the KUID you showed. I looked in the 'Out of Date' and 'Download Station' tabs in the Content Manager and looked up the KUID you listed and could not find it. I also went to the Download Station website and put in the KUID and found nothing. Could that be the problem?

rweber95
August 27th, 2011, 11:50 PM
blw con b2,<kuid2:96914:504862:1> is dependency for cincysouthernrwy's L&M 2-8-0 155,<kuid:45588:4864>. That must be where I got it from.

Bob Weber

jordon412
September 8th, 2011, 07:41 PM
I know that I haven't posted anything recently, but after going to the Tennessee Valley Railroad Museum's (Chattanooga, Tennessee) Railfest and seeing Norfolk Southern Southern-Painted GP59 #4610, I decided to see if I could download it onto Trainz 12. I found it on the Download Station (GP59 Norfolk Southern 4610 SR Green), but when I download it, the Content Manager showed that there was a missing KUID called <kuid2:45324:50015:1>. I looked around the Download Station for this KUID, but was unable to find it. I looked at the 'Errors and Warnings' in the Content manager and here's the warnings that were listed:
1. Dependency <kuid2:45324:50015:1> is unknown
2. Unable to load mesh file: 'gp59 norfolk southern 4610 sr green_shadow\gp59 norfolk southern 4610 sr green_shadow.pm'

I also tried downloading a Norfolk Southern F7A (NS F7A), but there seen to be three unknown KUIDs: <kuid:37581:1151>, <kuid2:45324:28100:1>, and <kuid2:45324:50022:2>. I was unable to find it anywhere on the Download Station.

I also decided to downloaded the Norfolk Southern SD70 (L SD70 Norfolk Southern PRR), and found that it was faulty. Here's the warnings listed under 'Errors and Warnings':
1. Unable to load primary texture 'sd70_body/numberboard.tga' for texture file 'sd70_body/numberboard-numberboardopacity.texture.txt'.
2. The primary and alpha texture are not the same size for 'sd70_body/numberboard-numberboardopacity.texture.txt'.
3. Binary conversion failed for texture resource 'sd70_body/numberboard-numberboardopacity.texture.txt'.

Any help?

ex-railwayman
September 9th, 2011, 05:10 AM
Why did someone answer this 2 year old thread anyway, I'm sure the OP has now found the missing asset over this length of time, or, are you still looking for it, Bob.......:hehe:

@ jordan412

kuid2:45324:50015:2 is a Blomberg M type bogey (black a) by Justin C on the jointedrail website, cannot remember which locomotive I obtained it from now though, sorry.

And your other error messages - Unable to load mesh file: 'gp59 norfolk southern 4610 sr green_shadow\gp59 norfolk southern 4610 sr green_shadow.pm'

This means that there is no shadow folder in your main package, you have to create a folder yourself, so, firstly find the pm file which is normally in the body folder and copy it, paste it into your 'new folder', change the file name from gp59 norfolk southern 4610 sr green_body.pm to gp59 norfolk southern 4610 sr green_shadow.pm and then make your 'new folder' name gp59 norfolk southern 4610 sr green_shadow and you should be able to commit the asset and the error message will disappear.

And also your error message - Unable to load primary texture 'sd70_body/numberboard.tga' for texture file 'sd70_body/numberboard-numberboardopacity.texture.txt'.

You need to look in the asset body folder, there should be a text document for the numberboard.txt, read what it says in the document, it may look like this -

Primary=numberboard.tga
Tile=st

you then have to create a .tga file, so, get one of the other .tga files from inside the folder, doesn't matter what the size is, a low number preferably, such as 1 / 3 / 5 kb, and then change the name of it to numberboard.tga and commit and your CMP should now recognise that there is a .tga file present.

Cheerz. ex-railwayman.

rweber95
September 9th, 2011, 09:49 PM
Why did someone answer this 2 year old thread anyway, I'm sure the OP has now found the missing asset over this length of time, or, are you still looking for it, Bob.......:hehe:No.

Bob Weber

jordon412
September 18th, 2011, 08:02 PM
I know that this is off-topic, but how do you use Trainz Paintshed with TS12? I downloaded it from the download station, but I can't find a way to acess it. Can anyone help?

rweber95
September 18th, 2011, 11:32 PM
Paintshed has been usable in Trainz since TS2006. If you want to reskin an asset use a graphics program such as Gimp or PaintShopPro.

Bob Weber

jordon412
September 27th, 2011, 05:48 PM
I need some help making some changes to the speeds and tractive efforts of bdaneal's locomotives. I used the information provided in the config file to figure out the exact tractive effort and it's max speed using the Steam Locomotive Designer found on www.steamlocomotive.com (http://www.steamlocomotive.com). To find this, go to the tab on the top of the website titled 'Builders/Specs,' scroll down and place your mouse over 'specifications,' and click on 'Steam Locomotive Designer' on the list that appears on the right of 'specifications' (you need the boiler pressure (psi), driver diameter (in inches), cylinder diameter (in inches) and piston stroke (in inches)(the measurements are based what would be produced on a 0.1% grade (the results would be crazy high))). You need Java to use it. Here's the tractive effort and the speed for the different downloads (all use friction bearings and 2 cyliners):

Baldwin heavy 2-8-2M:
Tractive effort: 40,800lbs
Maximum Speed: 67mph

Baldwin light 2-8-2:
Tractive effort: 30,600lbs
Maximum Speed: 58mph

Baldwin heavy 2-8-2H:
Tractive effort: 47,672lbs
Maximum Speed: 67mph

USRA Light 2-8-2:
Tractive effort: 54,724lbs
Maximum Speed: 73mph

USRA Light 4-8-2:
Tractive effort: 53,883lbs
Maximum Speed: 79mph

USRA Light 2-10-2:
Tractive effort: 69,575lbs
Maximum Speed: 67mph

Baldwin medium 2-8-0M:
Tractive effort: 31,824lbs
Maximum Speed: 60mph

Baldwin medium 2-8-0H:
Tractive effort: 31,824lbs
Maximum Speed: 60mph

Baldwin 4-6-0M:
Tractive effort: 25,665lbs
Maximum Speed: 72mph

Baldwin 4-6-0H:
Tractive effort: 23,690lbs
Maximum Speed: 72mph
I'm going to continue this in another message.

jordon412
September 27th, 2011, 06:42 PM
Here's the specifications for bdneal's steam locomotives I've downloaded:

Baldwin heavy 2-8-2M:
Boiler pressure: 185 PSI
Drivers: 57 inch diameter
Cylinders: 24x30 inch

Baldwin light 2-8-2:
Boiler pressure: 180 PSI
Drivers: 48 inch diameter
Cylinders: 20x24 inch

Baldwin heavy 2-8-2H:
Boiler pressure: 185 PSI
Drivers: 57 inch diameter
Cylinders: 24x30 inch

USRA Light 2-8-2:
Boiler Pressure: 200 PSI (based on boiler pressure needed in order to produce the tractive effort based on the other parameters)
Drivers: 63 inch
Cylinders: 26 by 30 inch

USRA Light 4-8-2:
Boiler Pressure: 200 PSI (based on boiler pressure needed in order to produce the tractive effort based on the other parameters)
Drivers: 69 inch
Cylinders: 27 by 30 inch

USRA Light 2-10-2:
Boiler Pressure: 200 PSI (based on boiler pressure needed in order to produce the tractive effort based on the other parameters)
Drivers: 57 inch
Cylinders: 27 by 32 inch

Baldwin medium 2-8-0M:
Boiler Pressure: 180 PSI
Drivers: 50 inch diameter
Cylinders: 20x26 inch

Baldwin medium 2-8-0H:
Boiler Pressure: 180 PSI
Drivers: 50 inch diameter
Cylinders: 20x26 inch

Baldwin 4-6-0M:
Boiler Pressure: 180 PSI
Drivers: 62 inch diameter
Cylinders: 20x26 inch

Baldwin 4-6-0H:
Boiler Pressure: 180 PSI
Drivers: 62 inch diameter
Cylinders: 20x24 inch

jordon412
October 8th, 2011, 01:02 PM
Hello? Anyone out there? I need some help.

rweber95
October 8th, 2011, 03:52 PM
Download Billegulla's Universal steam e-specs 09,<kuid2:81997:51009:3> which has a link to his spreadsheet that generates a steam engine spec and also has instructions on how to use it. Open it for Edit in Explorer to read the included readme.txt file.

Bob Weber

jordon412
October 14th, 2011, 03:54 PM
I downloaded the download you suggested and so far, it seems to be working.