How do I do this?

[motorbreath]

I am trying to install couplers on a bay window caboose. Below are the instructions from the DLS for automatic coupler with brake hose. It is supposed to install as a bogey. I know how to change bogies, I know there is an add bogey tag, but from there I am lost. TRS06

Limfront/limback should be 0.45 to 0.60m from the face of the buffer beam. Bogey attachment point is {0, limfront + 1.5m, 0}. Coupler pocket bottom 0.84m, top 0.89m, width 0.35m. If no coupler pocket, use black rectangle on buffer beam texture instead.

[Euphod]

Are you trying to add attachment points in GMax, or trying to change a coupler on an existing model?:confused:

[motorbreath]

I thought they were couplers you could add on like a bogey. They are kuid 124017:5007:1 on the DLS.

[Euphod]

I've actually been through this before, with no success. I'm thinking you downloaded a mesh from the DLS, and according to the instructions seems to be intended for use with Gmax; ie: someone was kind enough to build a coupler mesh and texture it for others to use on their models.

I don't think you can add it to a model already made, unless it has the three bogie system already to accomodate changing couplers, and then you would only have to change the reference # in the config to reflect the new coupler.:(

[motorbreath]

I was afraid of that. I have seen where some items of rolling stock have have additional spots for couplers in the bogey tag in content creator, so I was hoping that somehow I could add bogey. There seems to be no cabeese or flat cars with air hoses. I know there are roller bearing trucks with the couplers built in specifically for use on a caboose but I'm not so keen on their appearance. I like to let the little things drive me bonkers. Thank you for your reply.