Crossing Quandary . . .

[Firemanflyn]

I have occurred a problem with a anomalous type of 1 trk road crossing. The angle of the crossing in question would be
somewhere in the vicinity of 50-60 degrees, which puts it out of the range of existing pre built 45 and 90 dg crossing assets.
Have setup the arms as a standard 45 or 90 dg crossing using the appropriate ATLS assets, however due to the 60dg angle, unable
to connect road spline ends to the 'traffic stopper' device. So although the crossing arms/bells function when a train approaches
the crossing, road vehicles continue to motor on through the Xing oblivious to the approaching train!.
Hoping there maybe a solution/s to this crossing conundrum.

 

[stagecoach]

Traffic stoppers are angled for the road (not the track). There are different length stoppers if the crossing range needs to be bigger. The stopper must be connected to the ATLS slave and configured for the correct channel.

 

[David2de]

I use TRC crossings and for angled crossings over a single track, I use a 4 or 5 track traffic stopper so the traffic has room to stop. The traffic stopper is line with the road splines and in your example would be at 60 deg angle to the track. Very easy to set up. TRC crossings are simple to configure. https://sites.google.com/site/trcv2english/2-trc-system-v-4?authuser=0

 

[stagecoach]

In TRS22 there seems to be a problem with some scripts failing to complete. I am finding various assets are not functioning as they once did.